EP1SGX10DF672C6N - Stratix GX FPGA, 10K LE, 672-FBGA | Altera
Teilenummer: EP1SGX10DF672C6N ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $295 | $295,00 |
| 10 | $268 | $2.680,00 |
| 100 | $238 | $23.800,00 |
| 500 | $215 | $107.500,00 |
| 1.000 | $195 | $195.000,00 |
EP1SGX10DF672C6N Übersicht
A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated hardware resources like block RAM, DSP blocks, and high-speed transceivers. FPGAs sit in the digital logic hierarchy between microcontrollers and ASICs, providing hardware-timed parallel processing and the ability to reconfigure logic after PCB assembly. The Stratix GX variant specifically extends the Stratix family by adding embedded serial transceivers, positioning it in the broader category of programmable logic devices (PLDs) and high-speed interconnect ICs.
Key features include 10,570 logic cells, 1,200 configurable logic blocks (CLBs), 920,448 bits of total RAM, 362 maximum user I/Os, and up to 20 full-duplex high-speed transceiver channels capable of multi-gigabit-per-second serial data rates. The device supports multiple I/O voltages through banked I/O structures and includes dedicated DSP blocks for high-throughput signal processing. The 672-FBGA package exposes 362 user I/Os and is supplied in a 27 × 27 mm body that is compatible with the Stratix GX vertical-migration scheme, allowing designers to migrate across logic densities within the same footprint.
The EP1SGX10DF672C6N uses a CMOS process with a 1.5 V core supply, and its transceiver-rich architecture enables PHY-level implementation of protocols including PCI Express, Gigabit Ethernet, Serial RapidIO, and XAUI directly in silicon. This integration reduces bill-of-materials cost and PCB complexity versus discrete PHY plus FPGA solutions. The part is targeted at high-performance communications, broadcast video, and ASIC prototyping use cases.
Typical applications include high-speed serial interface bridging, telecom backplane aggregation, custom protocol bridging ASIC prototyping, broadcast video processing, and high-throughput DSP pipelines. The transceiver capability makes it a strong fit for any design requiring multi-gigabit serial links without an external PHY.
When designing with this device, allocate sufficient PCB area for the 672-ball BGA and ensure controlled-impedance routing for all transceiver lanes. Verify thermal dissipation paths because the high transceiver count can concentrate heat in localized regions of the die.
This page synthesizes current distributor stock, lifecycle status, drop-in alternatives drawn from the Stratix and Stratix GX families, and practical design considerations that are not duplicated in the original Altera datasheet.
Drop-in-Alternativen für EP1SGX10DF672C6N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP1SGX10DF672C6N (gleiche Bauform und Footprint) – abweichend in Operating Temperature, Package, Total RAM Bits, RoHS Status, Package Dimensions.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EP1SGX10CF672C6N
✅ Drop-In✓ Auf Lager
$152 / Stück
Datenblatt ansehen →EP1SGX10DF672C5N
✅ Drop-In✓ Auf Lager
$192 / Stück
Datenblatt ansehen →EP1SGX10DF672C7N
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →EP1SGX10CF672C6
✅ Drop-In✓ Auf Lager
$158 / Stück
Datenblatt ansehen →EP1SGX10CF672C7N
✅ Drop-In✓ Auf Lager
$182.1 / Stück
Datenblatt ansehen →EP1SGX10CF672C7
✅ Drop-In✓ Auf Lager
$185 / Stück
Datenblatt ansehen →EP1SGX10DF672C6N Grenzwerte & elektrische Eigenschaften
| Manufacturer | Altera (Intel) |
| Series | Stratix GX |
| Family | Stratix GX |
| Device Type | FPGA (Field Programmable Gate Array) |
| Logic Cells | 10,570 |
| Configurable Logic Blocks (CLBs) | 1,200 |
| Total RAM Bits | 920,448 |
| Maximum User I/Os | 362 |
| Supply Voltage (Core) | 1.425 V to 1.575 V (1.5 V nominal) |
| Logic Family | CMOS |
| Package Type | 672-FBGA (FineLine BGA, 27 × 27 mm, 1 mm pitch) |
| Anzahl der Pins | 672 |
| Montageart | Surface Mount |
| Operating Temperature (Commercial) | 0 °C to +85 °C |
| Transceivers | Up to 20 high-speed serial channels |
EP1SGX10DF672C6N 672-fbga (fineline bga, 27 × 27 mm, 1 mm pitch) Pinbelegungsleitfaden
Pinbelegung für EP1SGX10DF672C6N (672-fbga (fineline bga, 27 × 27 mm, 1 mm pitch)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EP1SGX10DF672C6N.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EP1SGX10DF672C6N ist geeignet für 6 Anwendungs: Custom Protocol Bridging ASIC Prototyping, Telecom Backplane Aggregation, Broadcast Video Processing, Industrial High-Speed Data Acquisition, Legacy PCI Express Endpoint / Root Complex Prototyping, ASIC Emulation and Prototyping.
Custom Protocol Bridging ASIC Prototyping
The EP1SGX10DF672C6N's 20 integrated multi-gigabit transceivers and 10,570 logic cells make it well suited for prototyping custom serial-protocol bridges that later migrate to an ASIC. Engineers can implement PHY-layer state machines, link training, and adaptation logic directly in FPGA fabric, replacing the typical ASSP-plus-FPGA two-chip approach with a single device. With 920 Kbits of embedded RAM and dedicated DSP blocks, the device sustains line-rate processing for protocols such as Serial RapidIO, XAUI, and proprietary backplane SerDes. The 672-FBGA package provides ample I/O for parallel side-band signals alongside the serial lanes, which is critical when bridging between mismatched clock domains.
Empfohlen
Telecom Backplane Aggregation
The EP1SGX10DF672C6N is widely deployed in telecom aggregation line cards that need to terminate many high-speed serial links from a backplane while performing framing, deframing, and traffic shaping. Its 20 transceiver channels at multi-gigabit rates map directly to typical backplane lane counts, and the 362 user I/Os handle parallel fabric interfaces to network processors. The 1.5 V core plus bank-selectable VCCIO rails let designers mix 1.5 V, 1.8 V, 2.5 V, and 3.3 V I/O without external level shifters. Stratix GX vertical migration within the 672-FBGA footprint enables density upgrades without board rework.
Empfohlen
Broadcast Video Processing
Broadcast video processing systems often require real-time pixel-rate manipulation such as color-space conversion, scaling, de-interlacing, and overlay compositing. The EP1SGX10DF672C6N's embedded DSP blocks and 920 Kbits of block RAM deliver the throughput needed for SD-SDI, HD-SDI, and 3G-SDI pipelines, while 362 user I/Os accept parallel video buses from external decoders. Designers commonly implement multiple independent video pipelines in a single device, taking advantage of the deterministic latency and parallel architecture versus general-purpose CPUs.
Empfohlen
Industrial High-Speed Data Acquisition
In high-channel-count industrial test, scientific instrumentation, and radar front-ends, the EP1SGX10DF672C6N's combination of 20 serial transceivers and large logic capacity lets designers build multi-channel digitizer aggregation in a single chip. Each transceiver lane can carry digitized IF data from an ADC across a backplane to a host processor, eliminating parallel LVDS routing that would otherwise consume hundreds of pins. The 1.5 V core supply and commercial 0 to 85 °C operating range suit controlled-environment test racks and laboratory instrumentation.
Empfohlen
Legacy PCI Express Endpoint / Root Complex Prototyping
Engineers historically used the EP1SGX10DF672C6N to prototype PCI Express Gen1 endpoints and root complexes because its transceivers directly drive the PCIe physical layer. The Stratix GX hard IP block plus fabric logic implement transaction, data link, and physical layers with deterministic latency, while the 672-FBGA package exposes enough I/O for auxiliary control and status signals. Although newer Cyclone and Stratix families are recommended for new designs, the EP1SGX10DF672C6N remains a viable platform for sustaining legacy PCIe Gen1 test fixtures.
Empfohlen
ASIC Emulation and Prototyping
With 10,570 logic cells and 920 Kbits of embedded RAM, the EP1SGX10DF672C6N is large enough to emulate mid-complexity ASIC RTL blocks for verification and early software development before tape-out. The 672-FBGA package exposes 362 user I/Os for chip-to-chip bridging on multi-FPGA emulation boards, and the 1.5 V core allows relatively straightforward power-tree design. Designers chain multiple Stratix GX devices together using the high-speed transceivers to share clocks and trace data across the emulation array, accelerating pre-silicon validation cycles.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP1SGX10DF672C6N – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP1SGX10CF672C6N | EP1SGX10DF672C5N | EP1SGX10DF672C7N | EP1SGX10CF672C6 | EP1SGX10CF672C7N | EP1SGX10CF672C7 |
|---|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera | Altera | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 672-FBGA (27x27, 1mm pitch) | 672-FBGA (27x27, 1mm pitch) - same | 672-FBGA (27x27, 1mm pitch) - same | 672-FBGA (27x27, 1mm pitch) - same | 672-FBGA (27x27, 1mm pitch) - same | 672-FBGA (27x27, 1mm pitch) - same | 672-FBGA (27x27, 1mm pitch) - same |
| Logic Cells | 10,570 | 10,570 | 10,570 | 10,570 | 10,570 | 10,570 | 10,570 |
| Total RAM Bits | 920,448 | 920,448 | 920,448 | 920,448 | 920,448 | 920,448 | 920,448 |
| Speed Grade | C6 | C6 | C5 (slower) | C7 (faster) | C6 | C7 (faster) | C7 (faster) |
| Core Voltage | 1.5 V (1.425 V - 1.575 V) | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Operating Temperature | 0 °C to +85 °C (Commercial) | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C |
| Maximum User I/Os | 362 | 362 | 362 | 362 | 362 | 362 | 362 |
Wichtigste Unterscheidungsmerkmale
- 20 integrated multi-gigabit transceivers in a 672-FBGA package (vs. EP1SGX10CF672C6N)
- Stratix GX vertical-migration pin-compatible package (vs. EP1SGX10DF672C5N)
- Faster C7 speed grade for timing-margin critical designs (vs. EP1SGX10DF672C7N)
Designhinweise
The 672-FBGA package concentrates heat under the central die region. At full transceiver utilization (20 lanes at multi-gigabit rates) the device can exceed 5–8 W of dissipation. Provide at least four thermal vias per thermal pad ball and connect them to inner-plane copper pours to spread heat. Designers targeting production deployment should measure the case temperature under worst-case traffic to verify the 85 °C commercial limit. Estimated: at 6 W dissipation with 4-layer FR-4 and no heatsink, the junction can approach the operating limit; a small clip-on heatsink is recommended for sustained full-load operation.
Use the Stratix GX vertical-migration pin tables to keep the 672-FBGA footprint reusable across densities in the family. Route all 20 high-speed transceiver lanes with controlled 100 Ω differential impedance, length-matched within the tolerance specified in the Stratix GX handbook. Place AC-coupling capacitors for each transceiver lane within 1 cm of the corresponding BGA ball; their placement is mandatory because the on-chip transceivers expect AC-coupled inputs. Decouple every VCC and VCCIO pin with a 0.1 µF plus 10 µF combination placed as close as BGA fanout allows.
Do not assume the EP1SGX10DF672C6N can be hot-swapped on a board designed for the EP1SGX10CF672C6N without verifying JTAG IDs and configuration bitstream compatibility. Altera/Intel Stratix GX devices use SRAM configuration, so an unprogrammed device will not boot on its own - always include a configuration memory (EPCS or compatible) on the schematic. Also note that obsolete part stock often carries older date codes that may not match the latest Quartus II supported-device database, which can complicate programming-file generation.
Compliance-Informationen
RoHS/REACH/lead-free status not explicitly stated in the provided web data for this obsolete part. Original Altera Stratix GX family shipped before RoHS was widely enforced; later date codes (post-2006) typically carry lead-free ball finish. Compliance should be verified per specific lot date code with the supplier.
