EP4CGX50DF23C6N - Cyclone IV GX FPGA 49,888 LE | Intel
Teilenummer: EP4CGX50DF23C6N ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $78.5 | $78,50 |
| 10 | $72.1 | $721,00 |
| 100 | $65.4 | $6.540,00 |
| 500 | $58.75 | $29.375,00 |
| 1.000 | $52.3 | $52.300,00 |
EP4CGX50DF23C6N Übersicht
A Cyclone IV GX FPGA is a programmable logic device that combines general-purpose fabric (look-up tables, flip-flops, routing, and block RAM) with hardened serial transceivers and PCIe IP, enabling cost-effective implementation of custom digital hardware, protocol bridges, and high-speed serial interfaces on a single chip. The Cyclone IV family sits below Cyclone V/10 in Intel's low-cost FPGA portfolio, optimized for volume production where power, density, and integrated transceivers matter more than absolute performance.
Key features of the EP4CGX50DF23C6N include 218 user I/O, dedicated hardware multipliers for DSP, 8 transceiver channels up to 3.125 Gbps, support for external memory interfaces including DDR/DDR2/QDRII SDRAM, and JTAG-based configuration. Compared with pure logic-only Cyclone IV E parts, the GX variant adds transceiver capability at the cost of slightly higher static power, which is acceptable when serial connectivity is required.
The device is fabricated on a 60 nm process node, which trades off absolute performance versus comparable 28/20 nm parts for substantially lower static and dynamic power consumption. The integrated transceivers remove the need for external PHY ICs in typical serial-link designs, reducing BOM cost and board area.
Typical applications include industrial video and image processing, low-cost PCIe endpoint cards, motor control and motor drive DSP, broadband access aggregation, broadcast video bridging, and protocol conversion cards. Designers choose Cyclone IV GX when a long-life, mature-node FPGA with built-in transceivers is needed at low unit cost.
A practical design tip is to plan the JTAG and configuration pinout early, and verify that the 484-pin FBGA routing escape supports both single-ended and differential pairs without violating skew rules.
This page synthesizes Intel distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, helping engineers select and qualify the part more efficiently.
Drop-in-Alternativen für EP4CGX50DF23C6N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP4CGX50DF23C6N (gleiche Bauform und Footprint) – abweichend in Package, Embedded Memory, Process Technology, Embedded 18x18 Multipliers, Operating Temperature.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EP4CGX50DF23C7N
✅ Drop-In✓ Auf Lager
$43.2 / Stück
Datenblatt ansehen →EP4CGX50DF23C8N
✅ Drop-In✓ Auf Lager
$56.4 / Stück
Datenblatt ansehen →EP4CGX50DF27C6N
✅ Drop-In✓ Auf Lager
$155 / Stück
Datenblatt ansehen →EP4CGX30DF23C6N
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
EP4CGX110DF23I7N
✅ Drop-In✓ Auf Lager
$182 / Stück
Datenblatt ansehen →EP4CGX50DF23C6N Grenzwerte & elektrische Eigenschaften
| Family | Cyclone IV GX |
| Logic Elements | 49,888 |
| Configurable Logic Blocks (CLBs) | 3,118 |
| Embedded Memory | 2,340 Kbits |
| Process Technology | 60 nm |
| Core Voltage | 1.2 V |
| Number of Pins / Balls | 484 |
| Package Type | 484-ball FBGA (PBGA) |
| JEDEC Package Code | S-PBGA-B484 |
| User I/O | 218 |
| Transceiver Channels | Up to 8 |
| Maximum Transceiver Data Rate | 3.125 Gbps |
| Operating Temperature Grade | Commercial |
| Montageart | Surface Mount (BGA) |
| Configuration Method | JTAG / Passive Serial / Active Serial |
EP4CGX50DF23C6N s-pbga-b484 Pinbelegungsleitfaden
Pinbelegung für EP4CGX50DF23C6N (s-pbga-b484-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EP4CGX50DF23C6N.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EP4CGX50DF23C6N ist geeignet für 6 Anwendungs: Industrial Ethernet Protocol Bridging, Low-Cost PCIe Endpoint Card, Broadcast Video Bridge and Router, Motor Control and Drive DSP, Wireless Baseband Aggregation, Test and Measurement Instrumentation.
Industrial Ethernet Protocol Bridging
The EP4CGX50DF23C6N's 8 high-speed transceivers at up to 3.125 Gbps and 49,888 logic elements make it ideal for industrial Ethernet bridges between PROFINET, EtherCAT, EtherNet/IP, and Modbus TCP networks. The transceiver channels handle 1000BASE-T PHY SERDES while the dense logic fabric implements protocol stacks, cycle-time scheduling, and timestamping. With 2,340 Kbits embedded RAM, frame buffers can be hosted on-chip. Its commercial 0-85C temperature grade and 484-ball FBGA package fit typical factory-floor enclosure budgets and supply requirements.
Empfohlen
Low-Cost PCIe Endpoint Card
The EP4CGX50DF23C6N's integrated PCIe hard IP block paired with 8 transceivers enables compact PCIe Gen1 x1/x4 endpoint cards without external PHYs. With 49,888 LE the device implements typical endpoint logic, DMA engines, MSI/MSI-X handlers, and small register interfaces. The 484-ball FBGA provides ample user I/O (218) for board-level signaling, while 2,340 Kbits of block RAM buffers PCIe payloads. Designers choose this part for industrial control cards, low-cost data acquisition, and instrumentation where PCIe x1 Gen1 bandwidth suffices.
Empfohlen
Broadcast Video Bridge and Router
The EP4CGX50DF23C6N's transceivers handle SDI, HDMI, and DisplayPort physical-layer serialization while 49,888 logic elements implement format conversion (SD/HD/3G-SDI), color-space translation, and audio embedding. Its 2,340 Kbits embedded RAM hosts line buffers, lookup tables, and audio channel memory. With 218 user I/O the FBGA-484 package accommodates parallel video buses plus control interfaces. Commercial temperature grade suits studio and broadcast truck environments.
Empfohlen
Motor Control and Drive DSP
The EP4CGX50DF23C6N's dedicated hardware multipliers and 49,888 LE support multi-axis field-oriented control (FOC) loops, SVPWM generation, and closed-loop PID at tens of kHz per axis. The 8 transceivers connect to digital encoder buses (EnDat 2.2, BISS, HIPERFACE DSL) and backplane EtherCAT. With 2,340 Kbits embedded RAM and 218 user I/O, gate-driver signals and current-sensor ADCs interface directly. Commercial temperature rating fits most enclosed drives.
Empfohlen
Wireless Baseband Aggregation
The EP4CGX50DF23C6N's 8 transceivers up to 3.125 Gbps enable CPRI/OBSAI fronthaul aggregation between baseband units and remote radio heads in small-cell and DAS deployments. The 49,888 LE implement IQ sample packing, framer/deframer, and timing synchronization logic; 2,340 Kbits embedded RAM buffers sub-frame data. The 484-ball FBGA is industry-standard for line-card layouts, easing PCB reuse across product variants.
Empfohlen
Test and Measurement Instrumentation
The EP4CGX50DF23C6N's logic density, transceivers, and 218 user I/O make it ideal for mid-range bench instruments such as protocol analyzers, logic-pattern generators, and JTAG-controlled board testers. The transceivers handle high-speed serial triggers and stimulus while 49,888 LE implement capture memory, pattern matching, and triggering state machines. With 2,340 Kbits embedded RAM and a 60 nm low-power process, fanless bench-top operation is feasible at the commercial 0-85C grade.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP4CGX50DF23C6N – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP4CGX50DF23C7N | EP4CGX50DF23C8N | EP4CGX50DF27C6N | EP4CGX30DF23C6N | EP4CGX110DF23I7N |
|---|---|---|---|---|---|---|
| Package | 484-ball FBGA (PBGA) | 484-ball FBGA (PBGA) - same | 484-ball FBGA (PBGA) - same | 672-ball FBGA - not pin-compatible | 484-ball FBGA (PBGA) - same | 484-ball FBGA (PBGA) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 49,888 | 49,888 | 49,888 | 49,888 | 29,440 | 109,440 |
| Embedded Memory (Kbits) | 2,340 | 2,340 | 2,340 | 2,340 | 1,080 | 5,490 |
| Transceiver Channels | 8 (up to 3.125 Gbps) | 8 | 8 | 8 | 8 | 8 |
| User I/O | 218 | 218 | 218 | 310 | 168 | 270 |
| Process / Core Voltage | 60 nm / 1.2 V | 60 nm / 1.2 V | 60 nm / 1.2 V | 60 nm / 1.2 V | 60 nm / 1.2 V | 60 nm / 1.2 V |
| Temperature Grade | Commercial (0 to 85C) | Commercial | Commercial | Commercial | Commercial | Industrial (-40 to 100C) |
| Speed Grade | C6 | C7 (faster) | C8 (fastest) | C6 | C6 | I7 (industrial + faster) |
Wichtigste Unterscheidungsmerkmale
- Integrated 8-channel transceivers at 3.125 Gbps (vs. EP4CGX50CF23C6N)
- Higher density with same FBGA-484 footprint (vs. EP4CGX30DF23C6N)
- Mature 60 nm low-power process (vs. Lattice ECP4)
Designhinweise
The 484-ball FBGA package requires a 1.0 mm or 1.27 mm pitch escape routing. Use a 6-layer or 8-layer stackup with dedicated ground planes under the device to control impedance of differential transceiver pairs (typically 100 ohm differential). Reference the JEDEC S-PBGA-B484 mechanical drawing for ball pad and solder-mask dimensions; non-solder-mask-defined pads are recommended.
Estimated: with 8 transceivers active at 3.125 Gbps and ~70% logic utilization, core current draw will approach 0.8-1.2 A at 1.2 V. Use a dedicated LDO or DC-DC regulator for VCCINT with at least 20% headroom; place bulk decoupling (220 uF tantalum or polymer) and 0.1 uF + 10 nF ceramic pairs within 5 mm of every supply pin pair.
Transceiver channels require AC-coupling capacitors (0.01 uF) in series with each TX/RX pair. Route transceiver lanes with controlled 100-ohm differential impedance, keep length matching within 0.127 mm (5 mil) on a pair, and avoid crossing reference-plane splits. The Cyclone IV GX Transceiver User Guide provides reference equalization settings per data rate.
Estimated: at full transceiver and logic activity the FBGA-484 junction-to-ambient thermal resistance is approximately 15-20 C/W with 4-layer PCB and adequate copper. With 2 W typical dissipation, expect ~30-40 C junction rise above ambient. For sealed enclosures, derate transceiver data rate or use a heatsink. Industrial variants (I7) are recommended above 70C ambient.
Common pitfalls when designing with this part include: (1) confusing the 'DF23' ball pattern with 'DF27' (different ball counts); (2) using the wrong configuration mode (AS vs PS) for the boot EEPROM; (3) leaving JTAG TCK unterminated; (4) mixing LVDS and LVTTL I/O standards on the same bank without VREF planning. Verify each against the Cyclone IV Device Handbook pin connection guidelines before tape-out.
Compliance-Informationen
RoHS and REACH compliance inferred from Intel/Alterac product line standards; no AEC-Q100 automotive grade for this commercial-temp part. JEDEC package code S-PBGA-B484 verified from third-party distributor listings.
