EP1SGX25CF672I6 - 25K LEs Stratix GX FPGA, 672-FBGA | Intel
N.º de pieza: EP1SGX25CF672I6 ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $256.5 | $2.565,00 |
| 100 | $228 | $22.800,00 |
| 500 | $199.5 | $99.750,00 |
| 1.000 | $171 | $171.000,00 |
EP1SGX25CF672I6 Descripción general
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit in the programmable logic device (PLD) family that combines configurable logic blocks (CLBs/LABs), programmable routing, dedicated DSP blocks, block RAM, and high-speed serial interfaces on a single die. FPGAs sit in the hierarchy: programmable logic -> logic device -> digital IC -> integrated circuit -> semiconductor. The Stratix GX family targets high-bandwidth communications, broadcast video, and data-acquisition systems that require both parallel DSP throughput and multi-gigabit serial I/O without an external PHY.
Key differentiating features of the EP1SGX25CF672I6 include embedded serializer/deserializer (SERDES) channels capable of data rates up to 3.125 Gbps per channel, dedicated Double Data Rate (DDR) SDRAM interface circuitry with read/write leveling, 16 DSP blocks delivering up to 224 GMACS performance, and a configurable logic fabric backed by TriMatrix memory architecture. The 672-pin FBGA (27 mm x 27 mm body, 1 mm pitch) supports high signal-count designs while preserving PCB routability through peripheral and array I/O banks.
Typical applications include multi-gigabit serial backplanes, broadcast video editing systems, software-defined radio, high-end test and measurement instrumentation, networking line cards with SERDES bridging, and PCI Express endpoint cards. The industrial temperature grade and embedded transceivers make it well suited for telecom baseband, defense signal processing, and storage area network (SAN) switching.
When designing with the EP1SGX25CF672I6, follow Altera's Stratix GX pin connection guidelines for the 672-FBGA package, ensure proper decoupling of each transceiver supply rail (VCCA_PLL, VCCH, VCCL), and observe the differential reference clock routing requirements for jitter compliance. Quartus II development software (now Quartus Prime) is required for synthesis, place-and-route, and transceiver configuration.
Alternativas directas para EP1SGX25CF672I6 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con EP1SGX25CF672I6 (mismo factor de forma y huella) — difiere en Package, Operating Temperature, RoHS Status, Process Technology, Family.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
EP1SGX25CF672I6N
✅ Sustitución directa✓ En stock
$171 / unidad
Ver hoja de datos →EP1SGX25CF672C7N
✅ Sustitución directa✓ En stock
$338.5 / unidad
Ver hoja de datos →EP1SGX25CF672C7
✅ Sustitución directa✓ En stock
$340 / unidad
Ver hoja de datos →EP1SGX25CF672C6N
✅ Sustitución directa✓ En stock
$210 / unidad
Ver hoja de datos →EP1SGX25CF672C6
✅ Sustitución directa✓ En stock
$171 / unidad
Ver hoja de datos →EP1SGX25CF672C5
✅ Sustitución directa✓ En stock
$1304.99 / unidad
Ver hoja de datos →EP1SGX25-CF672-I6
✅ Sustitución directa✓ En stock
$168 / unidad
Ver hoja de datos →EP1SGX25CF672I6 Valores máximos y características eléctricas
| Family | Stratix GX |
| Logic Elements | 25,660 |
| Logic Array Blocks (LABs) | 2,566 |
| Total RAM Bits | 1,944,576 |
| User I/O Pins | 455 |
| Core Supply Voltage | 1.425 V to 1.575 V (1.5 V typical) |
| Process Technology | 130 nm CMOS |
| Internal Clock Performance | Up to 5000 MHz |
| Encapsulado | 672-ball FBGA (27 x 27 mm, 1 mm pitch) |
| Tipo de montaje | Surface Mount |
| Temperatura de unión de funcionamiento | -40C to +100C |
| Estado RoHS | Compliant (lead-free FBGA) |
| Lead-Free | Yes |
Guía de configuración de pines de EP1SGX25CF672I6 672-ball fbga (27 x 27 mm, 1 mm pitch)
Configuración de pines para EP1SGX25CF672I6 (encapsulado 672-ball fbga (27 x 27 mm, 1 mm pitch)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para EP1SGX25CF672I6.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
EP1SGX25CF672I6 es adecuado para 6 aplicacións: Multi-Gigabit Serial Backplane Routing, Broadcast Video Editing Systems, Software-Defined Radio (SDR) Platforms, PCI Express Endpoint Cards, Telecom Line Card Aggregation, High-Speed Test and Measurement Instrumentation.
Multi-Gigabit Serial Backplane Routing
The EP1SGX25CF672I6 integrates up to twenty SERDES channels at data rates up to 3.125 Gbps per the Stratix GX handbook, enabling direct backplane serial links without external PHY chips. With 455 user I/O pins and 25,660 logic elements, the device can implement custom MAC-layer packet processing, link-state management, and aggregation logic alongside the serial I/O. Channel-bonding to standards such as SerialLite II, XAUI (4x3.125 Gbps), and PCI Express x4/x8 reduces board area and BOM cost in chassis-to-chassis interconnects.
Recomendado
Broadcast Video Editing Systems
The EP1SGX25CF672I6's combination of 1.94 Mbit embedded RAM, 16 DSP blocks (per the Stratix GX handbook), and multi-gigabit serial transceivers suits uncompressed HD-SDI video routers and editing systems. The fabric performs real-time color-space conversion, frame-buffer management, and embedded audio de-embed/re-embed, while the SERDES links transport SDI streams to back-end storage. The 455 I/O count accommodates parallel video bus capture alongside serial I/O on the same device.
Recomendado
Software-Defined Radio (SDR) Platforms
The EP1SGX25CF672I6 supports SDR waveform implementation through its DSP block array (224 GMACS performance per the Stratix GX handbook), high-speed ADC/DAC interfaces, and SERDES for digital RF data transport. The 25K logic elements implement channelization, FFT/iFFT engines, and modulation/demodulation algorithms, while SERDES links provide low-latency paths to RF front-end digitizers. Industrial temperature range (-40C to 100C) supports outdoor and military SDR installations.
Recomendado
PCI Express Endpoint Cards
The EP1SGX25CF672I6's hard PCI Express IP core supports x1, x4, and x8 endpoint implementations at 2.5 Gbps per lane through the embedded SERDES, eliminating external PHY silicon. The 25,660 logic elements and 1.94 Mbit block RAM implement protocol stack, DMA engines, and application logic for add-in cards. The 672-FBGA package supports differential SERDES pairs plus 455 user I/O for external memory and connector interfaces, suitable for server and workstation add-in cards.
Recomendado
Telecom Line Card Aggregation
Telecom line cards use the EP1SGX25CF672I6 to bond SERDES channels for SPI-3/SPI-4.2, RapidIO, and proprietary backplane links at gigabit rates per the Stratix GX handbook. The fabric implements TDM framer/deframer, packet classification, and traffic management with the on-chip DSP and block RAM. The 1.5V core, multi-rail I/O banks (LVTTL, LVCMOS, SSTL, HSTL, LVDS), and industrial temperature rating suit central-office deployments.
Recomendado
High-Speed Test and Measurement Instrumentation
The EP1SGX25CF672I6 provides 455 I/O pins for parallel ADC/DAC interfacing and SERDES channels up to 3.125 Gbps for captured-data streaming to host processors, making it well suited for high-end oscilloscopes, logic analyzers, and protocol testers. The 25K logic elements implement real-time triggering, pattern generation, and on-device statistics, while the 1.94 Mbit block RAM serves as deep sample buffer memory. Industrial temperature rating supports lab and field-test environments.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para EP1SGX25CF672I6 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | EP1SGX25CF672I6N | EP1SGX25CF672C7N | EP1SGX25CF672C7 | EP1SGX25CF672C6N | EP1SGX25CF672C6 | EP1SGX25CF672C5 | EP1SGX25-CF672-I6 |
|---|---|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 672-FBGA (CF672) | 672-FBGA (CF672) - same | 672-FBGA (CF672) - same | 672-FBGA (CF672) - same | 672-FBGA (CF672) - same | 672-FBGA (CF672) - same | 672-FBGA (CF672) - same | 672-FBGA (CF672) - same |
| Logic Elements | 25,660 | 25,660 | 25,660 | 25,660 | 25,660 | 25,660 | 25,660 | 25,660 |
| Total RAM Bits | 1,944,576 | 1,944,576 | 1,944,576 | 1,944,576 | 1,944,576 | 1,944,576 | 1,944,576 | 1,944,576 |
| User I/O | 455 | 455 | 455 | 455 | 455 | 455 | 455 | 455 |
| Temperature Grade | Industrial (-40C to 100C) | Industrial (-40C to 100C) | Commercial (0C to 85C) | Commercial (0C to 85C) | Commercial (0C to 85C) | Commercial (0C to 85C) | Commercial (0C to 85C) | Industrial (-40C to 100C) |
| Speed Grade | I6 (-6 speed, industrial) | I6 (-6) | C7 (-7) | C7 (-7) | C6 (-6) | C6 (-6) | C5 (-5, slowest) | I6 (-6) |
| Lead-Free (Pb-Free) | Yes (Pb-free FBGA) | Yes | Yes | No (leaded) | Yes | No (leaded) | No (leaded) | Yes |
Diferenciadores clave
- Lead-free / Pb-free ball finish required for RoHS-compliant designs (frente a EP1SGX25CF672C7 (leaded ball finish))
- Industrial temperature grade for -40C to 100C operation (frente a EP1SGX25CF672C7N (commercial 0C to 85C))
- I6 speed grade with -6 timing for high-performance designs (frente a EP1SGX25CF672C5 (-5 speed, slowest))
- Full 25K LE density in the Stratix GX family (frente a EP1SGX10CF672C7 (10K LE Stratix GX, same package))
Notas de diseño
The EP1SGX25CF672I6 requires multi-rail decoupling per the Stratix GX handbook. Place 0.1 uF and 0.01 uF X7R capacitors as close as possible to every VCC, VCCIO, VCCA_PLL, and VCCH pin. The PLL analog supply (VCCA_PLL) must be isolated from digital VCC by a ferrite bead and decoupled with a 10 uF tantalum in parallel with 0.1 uF ceramic. SERDES transceiver supplies (VCCH, VCCL) require their own low-noise LDOs (e.g., LT3027) to meet jitter specifications above 3 Gbps.
Estimated: at maximum toggle rate across all 25,660 LEs and active SERDES, the EP1SGX25CF672I6 dissipates approximately 5-8 W depending on logic utilization and transceiver channel count. With theta_JA of approximately 12-15 C/W on a 4-layer JEDEC test board, the junction temperature could rise 60-120 C above ambient. For industrial-grade deployments (junction 100 C max), forced-air airflow or a heatsink with thermal interface material is recommended when sustained logic utilization exceeds 60%.
Differential SERDES pair routing on the EP1SGX25CF672I6 must use 100 ohm differential impedance with matched length within 150 mils per the Stratix GX layout guidelines. Reference-clock routing to dedicated REFCLK pins must be isolated from digital switching signals and routed on inner stripline layers. Place the device on layer 2 with high-speed SERDES breaks to outer layers via stitched ground vias, and avoid routing digital signals directly under the BGA field to minimize crosstalk into the clock network.
Do not assume the EP1SGX25CF672I6 is pin-compatible with newer Stratix II/III/IV/V GX families - those use different die architectures and different BGA ballouts even when package code (F672) is similar. Always re-validate PCB footprint against the target device's package specifications before substitution. Also confirm JTAG chain and configuration scheme (PS, FPP, AS, JTAG) match the target board design, as configuration pin usage may differ between legacy Altera FPGA families.
Información de cumplimiento
RoHS-compliant per Altera material declaration; lead-free FBGA ball finish (Pb-free). Industrial temperature grade is not AEC-Q100 qualified (automotive). For automotive applications, evaluate Cyclone IV/V automotive-grade devices instead.
