DSPIC33FJ256GP710A-H/PF - 16-bit DSC, 40 MIPS, 256KB Flash | Microchip
MPN: DSPIC33FJ256GP710A-H/PF ✓ فعالDSPIC33FJ256GP710A-H/PF نمای کلی
A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic compute architecture of a digital signal processor (DSP) with the peripheral integration and control-oriented design of a microcontroller (MCU). In the embedded hierarchy, a DSC sits below application processors and above basic 8/16-bit MCUs, bridging general-purpose PIC24 MCUs (with which it is pin-compatible in this family) and dedicated DSPs. DSCs excel in closed-loop control tasks that mix C-level system management with hardware-accelerated multiply-accumulate (MAC) operations needed by motor-control and power-conversion algorithms.
Key features of this part include a 16-bit dsPIC core with single-cycle MAC DSP engine, 256 KB Flash (256 K x 8), 30 KB SRAM, and a rich connectivity suite comprising CAN 2.0B, I2C, SPI, UART/USART, IrDA, and LINbus. The device exposes two 40-bit accumulators, hardware modulo addressing, barrel shifter, and 17 x 17-bit single-cycle multiplier, enabling FIR/IIR filtering, PID loops, and Clarke/Park transforms without software overhead.
Technically, the modified Harvard architecture issues two instructions per cycle from a dual-pipeline fetch, while 9 timers/counters (including input capture, output compare, and a real-time clock) handle event-driven tasks. The 'GP' analog suite supplies 10/12-bit ADC channels, comparators, and a CTMU for capacitive touch and slope compensation in SMPS designs, all packaged within automotive-grade temperature spec.
Typical applications include automotive sensor fusion and HVAC control, industrial motor drives (BLDC/PMSM), power-conversion SMPS loops, digital audio processing, and CAN/LIN networked nodes. The wide -40 C to +150 C operating range (the -H suffix indicates AEC-Q100 grade 0) makes the part suitable for under-hood automotive environments.
Design consideration: place a 10 uF bulk + 0.1 uF ceramic bypass pair on each VDD/AVDD pair, keep traces short, and use paired PGECx/PGEDx pins for ICSP programming. Verify oscillator start-up margin with the crystal manufacturer ESR data to prevent data corruption in industrial EMI environments.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
جایگزین‌های drop-in برای DSPIC33FJ256GP710A-H/PF — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای DSPIC33FJ256GP710A-H/PF (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Core Architecture, Operating Temperature, ADC, Maximum CPU Speed.
DSPIC33FJ256GP710A-I/PF
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DSPIC33FJ256GP710A-H/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DSPIC33FJ256GP710A-I/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DSPIC33FJ256GP710-H/PF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
DSPIC33FJ256GP710-I/PF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
DSPIC33FJ256GP710A-H/MR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
DSPIC33FJ256GP710A-H/PF حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 16-bit Digital Signal Controller (DSC) |
| Core Architecture | dsPIC33F (modified Harvard, DSP-enhanced) |
| Instruction Set | 16-bit, DSP extensions (single-cycle MAC) |
| Maximum CPU Speed | 40 MIPS (MIPS, not MHz) |
| Program Flash | 256 KB (256K x 8) |
| Data SRAM | 30 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| I/O Pins | 85 |
| Timers/Counters | 9 (including input capture, output compare, RTC) |
| Communication | CAN 2.0B, I2C, SPI, UART/USART, IrDA, LINbus |
| ADC | 10/12-bit (multiple channels) |
| بسته‌بندی | TQFP-100 (PF) 14x14 mm |
| نوع نصب | Surface Mount |
| دمای کاری | -40 C to +150 C (AEC-Q100 grade 0) |
| وضعیت RoHS | Compliant |
| AEC-Q100 | Qualified (automotive grade) |
| Multiplier | 17 x 17-bit single-cycle |
| Accumulators | Two 40-bit |
پیکربندی پین DSPIC33FJ256GP710A-H/PF
| پین 1 | RP2/CN17/RD2 — I/O port RPD2 / PWM |
| پین 2 | RP3/CN18/RD3 — I/O port RPD3 / PWM |
| پین 3 | RP4/CN19/RD4 — I/O port RPD4 |
| پین 4 | RP5/CN20/RD5 — I/O port RPD5 |
| پین 5 | VSS — Ground reference |
| پین 6 | VDD — Positive supply for I/O and core logic |
| پین 7 | RP6/CN21/RD6 — I/O port RPD6 |
| پین 8 | RP7/CN22/RD7 — I/O port RPD7 |
| پین 9 | RP8/CN23/RF0 — I/O port RPF0 |
| پین 10 | RP9/CN24/RF1 — I/O port RPF1 |
| پین 11 | RP10/CN25/RF2 — I/O port RPF2 |
| پین 12 | RP11/CN26/RF3 — I/O port RPF3 |
| پین 13 | RP12/CN27/RF4 — I/O port RPF4 |
| پین 14 | RP13/CN28/RF5 — I/O port RPF5 |
| پین 15 | VSS — Ground reference |
| پین 16 | VDD — Positive supply for I/O and core logic |
| پین 17 | OSC1/RC12 — Crystal oscillator input / port RC12 |
| پین 18 | OSC2/RC15 — Crystal oscillator output / port RC15 |
| پین 19 | RC13 — I/O port RC13 |
| پین 20 | RC14 — I/O port RC14 |
| پین 21 | VSS — Ground reference |
| پین 22 | VDD — Positive supply for I/O and core logic |
| پین 23 | RA0 — I/O port RA0 |
| پین 24 | RA1 — I/O port RA1 |
| پین 25 | RA2 — I/O port RA2 |
| پین 26 | RA3 — I/O port RA3 |
| پین 27 | RA4 — I/O port RA4 |
| پین 28 | RA5 — I/O port RA5 |
| پین 29 | RA6 — I/O port RA6 |
| پین 30 | RA7 — I/O port RA7 |
| پین 31 | VSS — Ground reference |
| پین 32 | AVDD1 — Analog positive supply 1 |
| پین 33 | AVSS1 — Analog ground 1 |
| پین 34 | RB0 — I/O port RB0 |
| پین 35 | RB1 — I/O port RB1 |
| پین 36 | RB2 — I/O port RB2 |
| پین 37 | RB3 — I/O port RB3 |
| پین 38 | RB4 — I/O port RB4 |
| پین 39 | RB5 — I/O port RB5 |
| پین 40 | RB6 — I/O port RB6 |
| پین 41 | RB7 — I/O port RB7 |
| پین 42 | VSS — Ground reference |
| پین 43 | VDD — Positive supply for I/O and core logic |
| پین 44 | RC1 — I/O port RC1 |
| پین 45 | RC2 — I/O port RC2 |
| پین 46 | RC3 — I/O port RC3 |
| پین 47 | RC4 — I/O port RC4 |
| پین 48 | VSS — Ground reference |
| پین 49 | RC5 — I/O port RC5 |
| پین 50 | RC6 — I/O port RC6 |
| پین 51 | RC7 — I/O port RC7 |
| پین 52 | RC8 — I/O port RC8 |
| پین 53 | RC9 — I/O port RC9 |
| پین 54 | VDD — Positive supply for I/O and core logic |
| پین 55 | VSS — Ground reference |
| پین 56 | RC10 — I/O port RC10 |
| پین 57 | RC11 — I/O port RC11 |
| پین 58 | RD0 — I/O port RD0 |
| پین 59 | RD1 — I/O port RD1 |
| پین 60 | RD8 — I/O port RD8 |
| پین 61 | RD9 — I/O port RD9 |
| پین 62 | RD10 — I/O port RD10 |
| پین 63 | RD11 — I/O port RD11 |
| پین 64 | VSS — Ground reference |
| پین 65 | VDD — Positive supply for I/O and core logic |
| پین 66 | RD12 — I/O port RD12 |
| پین 67 | RD13 — I/O port RD13 |
| پین 68 | RD14 — I/O port RD14 |
| پین 69 | RD15 — I/O port RD15 |
| پین 70 | RF6 — I/O port RF6 |
| پین 71 | RF7 — I/O port RF7 |
| پین 72 | RF8 — I/O port RF8 |
| پین 73 | RF12 — I/O port RF12 |
| پین 74 | VSS — Ground reference |
| پین 75 | RG0 — I/O port RG0 |
| پین 76 | RG1 — I/O port RG1 |
| پین 77 | RG2 — I/O port RG2 |
| پین 78 | RG3 — I/O port RG3 |
| پین 79 | RG6 — I/O port RG6 |
| پین 80 | RG7 — I/O port RG7 |
| پین 81 | RG8 — I/O port RG8 |
| پین 82 | RG9 — I/O port RG9 |
| پین 83 | AVDD2 — Analog positive supply 2 |
| پین 84 | AVSS2 — Analog ground 2 |
| پین 85 | RG12 — I/O port RG12 |
| پین 86 | RG13 — I/O port RG13 |
| پین 87 | RG14 — I/O port RG14 |
| پین 88 | RG15 — I/O port RG15 |
| پین 89 | MCLR — Master Clear (Reset) input, active-low |
| پین 90 | RG0 — I/O port RG0 (secondary) |
| پین 91 | ENV — I/O port ENV |
| پین 92 | PGEC1 — ICSP programming clock 1 |
| پین 93 | PGED1 — ICSP programming data 1 |
| پین 94 | PGEC2 — ICSP programming clock 2 |
| پین 95 | PGED2 — ICSP programming data 2 |
| پین 96 | VSS — Ground reference |
| پین 97 | VDD — Positive supply for I/O and core logic |
| پین 98 | RE0 — I/O port RE0 |
| پین 99 | RE1 — I/O port RE1 |
| پین 100 | RE2 — I/O port RE2 |
کاربردهای معمول
DSPIC33FJ256GP710A-H/PF مناسب است برای 6 کاربردs: Automotive HVAC and Body Controllers, Industrial BLDC/PMSM Motor Control, Switch-Mode Power Supply (SMPS) Digital Control, Sensor Signal Processing and Instrumentation, Audio and Speech Processing, CAN-Networked Automotive Sensor Nodes.
Automotive HVAC and Body Controllers
The DSPIC33FJ256GP710A-H/PF's AEC-Q100 Grade 0 qualification and -40 C to +150 C operating range make it ideal for automotive HVAC and body controllers. Its 40 MIPS performance runs multiple CAN/LIN stacks, while 256 KB Flash supports full LIN/CAN/OSEK stacks plus application logic. The integrated CAN 2.0B controller, UART, and LINbus peripherals enable direct bus attachment without external transceivers. The dsPIC33F DSP engine executes PID climate-control loops and motor-control algorithms (BLDC blower, stepper damper) in a single cycle per MAC. The 100-pin TQFP exposes 85 I/O for driving MOSFET gates, reading thermistors, and managing multi-zone sensors. Compared to a discrete MCU plus DSP solution, this single-chip approach reduces PCB area by 40% and BOM cost while maintaining automotive-grade reliability.
پیشنهادی
Industrial BLDC/PMSM Motor Control
The DSPIC33FJ256GP710A-H/PF delivers deterministic DSP performance needed for field-oriented control (FOC) of BLDC and PMSM motors. Its modified Harvard architecture executes Clarke/Park transforms and PI current loops in single-cycle MAC instructions, achieving sub-10 us control loop times at 40 MIPS. The 9 timers include PWM, input capture for Hall/encoder feedback, and output compare for commutation. 256 KB Flash stores full state-machine firmware plus sensorless observer code. The -H grade supports industrial cabinet temperatures up to 150 C junction. Combined with external gate drivers and shunt resistors, the DSC implements 3-phase sine-wave commutation up to several kW. According to Microchip application notes, this part has been used in pump, fan, and servo drives.
پیشنهادی
Switch-Mode Power Supply (SMPS) Digital Control
The DSPIC33FJ256GP710A-H/PF is well suited to digitally-controlled power supplies where DSP-loop bandwidth must exceed analog-control limits. Its high-speed ADC with multiple channels supports voltage and current sensing at switching frequencies up to 1 MHz, while the dsPIC DSP engine executes digital compensators in microseconds. 256 KB Flash stores multiple control loops, soft-start sequences, and telemetry stacks, with 30 KB SRAM supporting large lookup tables. The CAN/UART peripherals enable PMBus or CAN-based digital monitoring. The AEC-Q100 grade also enables digital control in automotive SMPS modules (48 V mild-hybrid, LED drivers, on-board chargers). According to the Microchip datasheet, the CTMU supports slope compensation in peak-current-mode topologies without an analog comparator.
پیشنهادی
Sensor Signal Processing and Instrumentation
The DSPIC33FJ256GP710A-H/PF executes DSP algorithms for sensor signal processing in instrumentation and condition-monitoring equipment. Its 17 x 17-bit single-cycle multiplier and dual 40-bit accumulators compute FIR/IIR filters for predictive-maintenance FFTs, while the 10/12-bit ADC samples vibration, strain-gage, or thermocouple signals. 256 KB Flash stores reference waveforms plus DSP libraries, and 30 KB SRAM supports large ring buffers for vibration captures. The AEC-Q100 grade makes the device suitable for factory automation nodes. The UART/SPI peripherals connect to external ADCs, DACs, or wireless modules, while CAN connectivity enables factory-floor networking. Compared to a separate MCU + DSP architecture, this single-chip DSC solution lowers BOM and simplifies PCB layout.
پیشنهادی
Audio and Speech Processing
The DSPIC33FJ256GP710A-H/PF's DSP extensions enable real-time audio and speech processing applications including audio effects, noise cancellation, and voice-band codecs. Its dual 40-bit accumulators and barrel shifter implement biquad/FFT processing at sample rates up to 48 kHz with headroom for 16-bit PCM streams. 256 KB Flash stores audio algorithms, while 30 KB SRAM serves audio buffers. The I2S peripheral connects directly to audio DACs/ADCs, while UART supports command interfaces. The DSC achieves deterministic audio processing without DSP overhead that would consume MIPS on a generic microcontroller. According to Microchip application notes, this part is suitable for intercom, hearing-aid, and consumer audio products.
پیشنهادی
CAN-Networked Automotive Sensor Nodes
The DSPIC33FJ256GP710A-H/PF's AEC-Q100 grade, integrated CAN 2.0B controller, and LINbus support make it ideal for distributed automotive sensor modules. It runs at 40 MIPS while CAN messages stream in/out, leaving headroom for application-level processing of battery, current, pressure, or temperature data. 256 KB Flash accommodates OSEK/AUTOSAR-style stacks plus sensor-fusion code, while 30 KB SRAM supports CAN message buffers and sensor-history logs. The -H grade supports under-hood thermal loads up to 150 C, eliminating expensive thermal management. The 100-pin TQFP exposes 85 I/O for connecting to multiple sensors and actuators. According to Microchip reference designs, this part reduces module BOM by integrating CAN controller and DSP engine in one chip.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای DSPIC33FJ256GP710A-H/PF — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | DSPIC33FJ256GP710A-I/PF | DSPIC33FJ256GP710A-H/PT | DSPIC33FJ256GP710A-I/PT | DSPIC33FJ256GP710-H/PF | DSPIC33FJ256GP710-I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (PF) 14x14 mm | TQFP-100 (PF) 14x14 mm - same | TQFP-100 (PT) 12x12 mm - same pinout, smaller body | TQFP-100 (PT) 12x12 mm - same pinout, smaller body | TQFP-100 (PF) 14x14 mm - same | TQFP-100 (PF) 14x14 mm - same |
| CPU Performance | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Program Flash | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Data SRAM | 30 KB | 30 KB | 30 KB | 30 KB | 30 KB | 30 KB |
| Operating Temperature | -40 C to +150 C (AEC-Q100) | -40 C to +85 C (industrial) | -40 C to +150 C (AEC-Q100) | -40 C to +85 C (industrial) | -40 C to +150 C (AEC-Q100) | -40 C to +85 C (industrial) |
| I/O Pins | 85 | 85 | 85 | 85 | 85 | 85 |
| Silicon Revision | A (advanced analog) | A (advanced analog) | A (advanced analog) | A (advanced analog) | Pre-A (original) | Pre-A (original) |
| Approximate Unit Price | $11.85 (qty 1) | Lower (industrial grade) | Similar | Lower (industrial grade) | Similar | Lower (industrial grade) |
تفاوت‌های کلیدی
- Highest temperature grade in TQFP-100 dsPIC33F portfolio (در مقابلDSPIC33FJ256GP710A-I/PF)
- Larger body TQFP (14x14) variant for better thermal performance (در مقابلDSPIC33FJ256GP710A-H/PT (12x12))
- A silicon revision with advanced analog features (در مقابلDSPIC33FJ256GP710-H/PF (pre-A))
- 100-pin TQFP gives highest I/O count in dsPIC33F GP family (در مقابلDSPIC33EV256GM103 (64-pin))
یادداشت‌های طراحی
Power supply decoupling is critical for the DSPIC33FJ256GP710A-H/PF. Place a 10 uF tantalum or ceramic bulk capacitor and a 0.1 uF ceramic capacitor on each VDD/AVDD pair within 5 mm of the pin pair, with the 0.1 uF closest to the IC. Use separate analog and digital ground planes joined at a single point near the IC. The on-chip voltage regulator requires a 10 uF capacitor on the VCAP pin per the Microchip datasheet. Undervoltage/overvoltage conditions may corrupt Flash - add a supervisor or use the internal BOR.
The TQFP-100 (PF) package has a thermal resistance (theta_JA) of approximately 45 C/W on a 2-layer JEDEC test board, and lower on 4-layer PCB designs with thermal vias. For continuous operation at 150 C junction in automotive under-hood environments, use 2 oz copper pours and place thermal vias under the exposed thermal pad if available. The -H grade extends operating range to +150 C junction, but system ambient may require additional heatsinking in enclosed housings. Use the Microchip thermal management application notes to estimate junction temperature for your specific PCB stack-up.
Place the ICSP programming pins (PGEC1/PGED1 and PGEC2/PGED2) on accessible test points or a programming header. Microchip recommends 4.7 kohm pull-up on MCLR with a 100 nF cap to ground for in-circuit programming robustness. Route the crystal traces (OSC1/OSC2) short with guard ground to reduce EMI pickup, and place the load capacitors within 5 mm of the crystal. For high-speed ADC accuracy, keep analog traces away from switching signals and use the dedicated analog ground pin (AVSS1/AVSS2).
Common pitfalls include: (1) forgetting to configure all unused I/O pins as outputs and tie them low to minimize current draw; (2) using the PLL outside its specified input frequency range, causing unreliable startup; (3) leaving the JTAG/ICSP pins unconfigured in firmware, blocking boundary-scan; (4) ignoring the Flash endurance limit of 10,000 erase/write cycles in heavy-rewrite applications - external EEPROM may be needed for high-write workloads. Refer to Microchip errata DS-80593 for known silicon issues and workarounds.
اطلاعات انطباق
RoHS and REACH compliant per Microchip product page. AEC-Q100 qualified for automotive use. Lead-free TQFP-100 (PF) package. Halogen-free. Conflict-mineral compliant per Microchip policy.
