BTS5215LAUMA1 vs BTS621L1E3128ABUMA1 Comparaison
Comparaison détaillée côte à côte de BTS5215LAUMA1 par Infineon et BTS621L1E3128ABUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS621L1E3128ABUMA1 - 24V Dual Hi-Side Switch, 8mΩ PROFET | Infineon
BTS621L1E3128ABUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS5215LAUMA1 | BTS621L1E3128ABUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,18 | $2,45 |
| Product Type | Smart High-Side Power Switch | Dual-channel smart high-side power switch (PROFET) |
| Number of Channels | 2 | 2 (dual high-side, 1:1) |
| On-State Resistance (RDS(on)) | 90 mΩ typical per channel | — |
| Continuous Output Current per Channel | 3.7 A | — |
| Operating Voltage Range | 8 V to 36 V | — |
| Standby Current | Very low (datasheet value [DATA_NEEDED: standby current uA]) | — |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | CMOS-compatible, ground-referenced |
| Diagnostic Feedback | Status feedback per channel | Yes - open-load and overtemperature reporting |
| MOSFET Technology | N-channel vertical power MOSFET with charge pump | — |
| Load Type Support | Resistive and inductive loads | — |
| Protection Features | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage | — |
| Demagnetization | Fast demagnetization of inductive loads | — |
| Boîtier | PG-DSO-12-9 | PG-TO263-7-2 (D2PAK-7, exposed tab) |
| Température de fonctionnement | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] | — |
| Statut RoHS | Compliant | — |
| FET Topology | — | N-Channel vertical power MOSFET with charge pump |
| On-State Resistance Rds(on) | — | 8 mΩ typical per channel |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| Maximum Supply Voltage | — | 24 V (load-dump survivable) |
| Continuous Load Current | — | 4.4 A per channel |
| Plage de température de fonctionnement | — | -40 °C to +150 °C junction |
| Type de montage | — | Surface Mount |
| Embedded Protection | — | Overload, current limit, short-circuit, thermal shutdown, overvoltage (load dump), fast demagnetization, reverse battery |
| Technology | — | Smart SIPMOS (monolithic) |
| RoHS / Lead-Free | — | Compliant (Pb-free) |