MC912DG128ACPV - 16-bit HC12 MCU, 128KB Flash | NXP | 112-LQFP
Référence : MC912DG128ACPV ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $22.5 | $22,50 |
| 10 | $19.8 | $198,00 |
| 100 | $16.5 | $1 650,00 |
| 500 | $13.75 | $6 875,00 |
| 1 000 | $11.25 | $11 250,00 |
MC912DG128ACPV Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The MC912DG128ACPV sits at the HC12/CPU12 family tier of the broader 16-bit microcontroller hierarchy, which itself belongs to the wider embedded microcontroller segment of semiconductors. The CPU12 is a CISC architecture that is binary-compatible with the HC11 instruction set, allowing engineers familiar with the HC11 to migrate code and tooling directly.
Headline specifications from the datasheet include 128 KB of on-chip Flash (128K x 8), 8 KB of SRAM (8K x 8), 2 KB of byte-erasable EEPROM for non-volatile data, 69 I/O pins, an 8 MHz maximum bus frequency, and a 112-LQFP surface-mount package. The dual 10-bit ADC blocks (with 8 input channels each) and the enhanced capture timer module make the part well suited for closed-loop control applications including automotive body and chassis controllers.
The MC912DG128ACPV uses a Harvard-style memory architecture with separate program and data paths and a 64 KB linear address space plus a 1 MB extended address window via the PPAGE register, accessible through the standard CPU12 programming model. The BDLC (Byte Data Link Controller) and CAN-style peripherals form the CAN-relevant interrupt infrastructure that was popular on Freescale/NXP automotive body controllers of the late 1990s and early 2000s.
Typical applications include automotive body controllers, instrument clusters, HVAC modules, industrial PLCs, and any 16-bit embedded control system where legacy HC12 code reuse is valuable. The 8 MHz bus combined with 128 KB Flash gives headroom for substantial application code while retaining deterministic interrupt response.
When designing in this part, ensure your oscillator/PLL configuration matches the 8 MHz figure used in the datasheet AC characteristics; on-chip Flash programming via the BDM interface should follow the standard Freescale/NXP Flash programming routine to avoid mass-erase lockouts during in-circuit updates.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes, complementing the NXP/Freescale datasheet by curating cross-reference information and at-a-glance parametric comparisons across the HC12 family.
Alternatives de remplacement direct pour MC912DG128ACPV — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC912DG128ACPV (même facteur de forme et même empreinte) — différant par Package, Lifecycle Status, RAM Size, Serial Interfaces.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC912DG128ACPVE
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MC912DT128ACPV
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC912DG128AVPVE
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MC912DG128CCPV
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC912DG128ACPV Valeurs maximales et caractéristiques électriques
| Core | CPU12 (HC12), 16-bit CISC |
| Fréquence d'horloge maximale | 8 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| RAM Size | 8 KB (8K x 8) |
| EEPROM Size | 2 KB |
| Number of I/O Pins | 69 |
| ADC | 2 x 8-channel 10-bit A/D converters |
| Serial Interfaces | 2x SCI, 1x SPI, 1x I2C |
| Timers | Enhanced Capture Timer (ECT), 16-bit |
| Boîtier | 112-LQFP (20x20 mm) |
| Type de montage | Surface Mount |
| Process Technology | HCMOS |
Configuration des broches de MC912DG128ACPV
| Broche 1 | PA0 — Port A bit 0 / general-purpose I/O |
| Broche 2 | PA1 — Port A bit 1 / general-purpose I/O |
| Broche 3 | PA2 — Port A bit 2 / general-purpose I/O |
| Broche 4 | PA3 — Port A bit 3 / general-purpose I/O |
| Broche 5 | PA4 — Port A bit 4 / general-purpose I/O |
| Broche 6 | PA5 — Port A bit 5 / general-purpose I/O |
| Broche 7 | PA6 — Port A bit 6 / general-purpose I/O |
| Broche 8 | PA7 — Port A bit 7 / general-purpose I/O |
| Broche 9 | VDDR — I/O supply voltage (VDDR) |
| Broche 10 | VSS — Digital ground (VSS) |
| Broche 11 | VDD — Digital supply voltage (VDD) |
| Broche 12 | PB0 — Port B bit 0 / general-purpose I/O |
| Broche 13 | PB1 — Port B bit 1 / general-purpose I/O |
| Broche 14 | PB2 — Port B bit 2 / general-purpose I/O |
| Broche 15 | PB3 — Port B bit 3 / general-purpose I/O |
| Broche 16 | PB4 — Port B bit 4 / general-purpose I/O |
| Broche 17 | PB5 — Port B bit 5 / general-purpose I/O |
| Broche 18 | PB6 — Port B bit 6 / general-purpose I/O |
| Broche 19 | PB7 — Port B bit 7 / general-purpose I/O |
| Broche 20 | PC0 — Port C bit 0 / general-purpose I/O / SCI |
| Broche 21 | PC1 — Port C bit 1 / general-purpose I/O / SCI |
| Broche 22 | PC2 — Port C bit 2 / general-purpose I/O / SCI |
| Broche 23 | PC3 — Port C bit 3 / general-purpose I/O / SCI |
| Broche 24 | PC4 — Port C bit 4 / general-purpose I/O / SPI |
| Broche 25 | PC5 — Port C bit 5 / general-purpose I/O / SPI |
| Broche 26 | PC6 — Port C bit 6 / general-purpose I/O / SPI |
| Broche 27 | PC7 — Port C bit 7 / general-purpose I/O / SPI |
| Broche 28 | VSS — Digital ground (VSS) |
| Broche 29 | VDD — Digital supply voltage (VDD) |
| Broche 30 | PD0 — Port D bit 0 / general-purpose I/O / I2C SCL |
| Broche 31 | PD1 — Port D bit 1 / general-purpose I/O / I2C SDA |
| Broche 32 | PD2 — Port D bit 2 / general-purpose I/O |
| Broche 33 | PD3 — Port D bit 3 / general-purpose I/O |
| Broche 34 | PD4 — Port D bit 4 / general-purpose I/O |
| Broche 35 | PD5 — Port D bit 5 / general-purpose I/O |
| Broche 36 | PD6 — Port D bit 6 / general-purpose I/O |
| Broche 37 | PD7 — Port D bit 7 / general-purpose I/O |
| Broche 38 | PE0 — Port E bit 0 / general-purpose I/O / XIRQ |
| Broche 39 | PE1 — Port E bit 1 / general-purpose I/O / IRQ |
| Broche 40 | PE2 — Port E bit 2 / general-purpose I/O |
| Broche 41 | PE3 — Port E bit 3 / general-purpose I/O |
| Broche 42 | PE4 — Port E bit 4 / general-purpose I/O |
| Broche 43 | PE5 — Port E bit 5 / general-purpose I/O |
| Broche 44 | PE6 — Port E bit 6 / general-purpose I/O |
| Broche 45 | PE7 — Port E bit 7 / general-purpose I/O |
| Broche 46 | VSS — Digital ground (VSS) |
| Broche 47 | VDD — Digital supply voltage (VDD) |
| Broche 48 | PJ0 — Port J bit 0 / general-purpose I/O |
| Broche 49 | PJ1 — Port J bit 1 / general-purpose I/O |
| Broche 50 | PJ2 — Port J bit 2 / general-purpose I/O |
| Broche 51 | PJ3 — Port J bit 3 / general-purpose I/O |
| Broche 52 | PJ4 — Port J bit 4 / general-purpose I/O |
| Broche 53 | PJ5 — Port J bit 5 / general-purpose I/O |
| Broche 54 | PJ6 — Port J bit 6 / general-purpose I/O |
| Broche 55 | PJ7 — Port J bit 7 / general-purpose I/O |
| Broche 56 | PM0 — Port M bit 0 / general-purpose I/O |
| Broche 57 | PM1 — Port M bit 1 / general-purpose I/O |
| Broche 58 | PM2 — Port M bit 2 / general-purpose I/O |
| Broche 59 | PM3 — Port M bit 3 / general-purpose I/O |
| Broche 60 | PM4 — Port M bit 4 / general-purpose I/O |
| Broche 61 | PM5 — Port M bit 5 / general-purpose I/O |
| Broche 62 | PM6 — Port M bit 6 / general-purpose I/O |
| Broche 63 | PM7 — Port M bit 7 / general-purpose I/O |
| Broche 64 | VSS — Digital ground (VSS) |
| Broche 65 | VDD — Digital supply voltage (VDD) |
| Broche 66 | PP0 — Port P bit 0 / PWM / general-purpose I/O |
| Broche 67 | PP1 — Port P bit 1 / PWM / general-purpose I/O |
| Broche 68 | PP2 — Port P bit 2 / PWM / general-purpose I/O |
| Broche 69 | PP3 — Port P bit 3 / PWM / general-purpose I/O |
| Broche 70 | PP4 — Port P bit 4 / PWM / general-purpose I/O |
| Broche 71 | PP5 — Port P bit 5 / PWM / general-purpose I/O |
| Broche 72 | PP6 — Port P bit 6 / PWM / general-purpose I/O |
| Broche 73 | PP7 — Port P bit 7 / PWM / general-purpose I/O |
| Broche 74 | PS0 — Port S bit 0 / general-purpose I/O / SPI |
| Broche 75 | PS1 — Port S bit 1 / general-purpose I/O / SPI |
| Broche 76 | PS2 — Port S bit 2 / general-purpose I/O / SPI |
| Broche 77 | PS3 — Port S bit 3 / general-purpose I/O / SPI |
| Broche 78 | PS4 — Port S bit 4 / general-purpose I/O / SPI |
| Broche 79 | PS5 — Port S bit 5 / general-purpose I/O / SPI |
| Broche 80 | PS6 — Port S bit 6 / general-purpose I/O / SPI |
| Broche 81 | PS7 — Port S bit 7 / general-purpose I/O / SPI |
| Broche 82 | PT0 — Port T bit 0 / IOC0 / Timer |
| Broche 83 | PT1 — Port T bit 1 / IOC1 / Timer |
| Broche 84 | PT2 — Port T bit 2 / IOC2 / Timer |
| Broche 85 | PT3 — Port T bit 3 / IOC3 / Timer |
| Broche 86 | PT4 — Port T bit 4 / IOC4 / Timer |
| Broche 87 | PT5 — Port T bit 5 / IOC5 / Timer |
| Broche 88 | PT6 — Port T bit 6 / IOC6 / Timer |
| Broche 89 | PT7 — Port T bit 7 / IOC7 / Timer |
| Broche 90 | PAD0 — Port AD bit 0 / ADC input AN0 |
| Broche 91 | PAD1 — Port AD bit 1 / ADC input AN1 |
| Broche 92 | PAD2 — Port AD bit 2 / ADC input AN2 |
| Broche 93 | PAD3 — Port AD bit 3 / ADC input AN3 |
| Broche 94 | PAD4 — Port AD bit 4 / ADC input AN4 |
| Broche 95 | PAD5 — Port AD bit 5 / ADC input AN5 |
| Broche 96 | PAD6 — Port AD bit 6 / ADC input AN6 |
| Broche 97 | PAD7 — Port AD bit 7 / ADC input AN7 |
| Broche 98 | VREFH — ADC reference high (VREFH) |
| Broche 99 | VREFL — ADC reference low (VREFL) |
| Broche 100 | VSSA — Analog ground (VSSA) |
| Broche 101 | VDDA — Analog supply (VDDA) |
| Broche 102 | RESET — External reset (active low) |
| Broche 103 | MODA — Mode select A / BDM |
| Broche 104 | MODB — Mode select B / BDM |
| Broche 105 | XIRQ — External IRQ (non-maskable) |
| Broche 106 | IRQ — External IRQ (maskable) |
| Broche 107 | ECLK — External E-clock output |
| Broche 108 | EXTAL — Crystal oscillator pin |
| Broche 109 | XTAL — Crystal oscillator pin |
| Broche 110 | VSSPLL — PLL ground |
| Broche 111 | VDDPLL — PLL supply |
| Broche 112 | VSS — Digital ground (VSS) |
Applications typiques
MC912DG128ACPV convient pour 6 applications: Automotive Body Controller, Industrial HVAC Controller, Instrument Cluster Front-End, PLC / Industrial Automation, Smart Sensor / Edge IoT Hub, Motor Control (Low-Power BLDC / Stepper).
Automotive Body Controller
The MC912DG128ACPV fits automotive body modules because its two 8-channel 10-bit ADCs (16 analog inputs total) handle sensor reading from temperature, position, and current sensors at the 0.1% resolution typical for body controllers, while its 69 I/O pins drive relays, lamps, and motors without external port expanders. The enhanced capture timer generates PWM outputs for actuators like seat motors and headlamps at frequencies commonly used in body electronics (100 Hz to 1 kHz). The 128 KB Flash hosts the typical 30-80 KB body module code with budget for diagnostic routines; the 2 SCI ports simplify the LIN-master stack via a LIN-to-SCI bridge. Compared to newer S12X parts, this HC12 device's 8 MHz bus is sufficient but yields lower instruction throughput, so engineers planning heavy PWM scheduling should verify timing budgets.
Recommandé
Industrial HVAC Controller
In industrial HVAC modules, the MC912DG128ACPV's enhanced capture timer and dual 10-bit ADC blend well with thermocouple/4-20mA front ends and three-phase Triac triggering. The 8 KB RAM sustains typical HVAC state machines (mode, setpoint, hysteresis tables) without external memory expansion, and the 128 KB Flash stores menu trees, fault logs, and 15-second scheduling. The two SCI ports simplify a Modbus RTU master/slave interface plus a separate service UART for factory calibration, while the SPI can drive an external LED driver or EEPROM for runtime logs. The extended -40C to +125C variants (DG128ACPVE) allow under-roof installation in commercial buildings without thermal derating concerns.
Recommandé
Instrument Cluster Front-End
The MC912DG128ACPV's 8-channel ADC plus 16-bit enhanced capture timer are useful for analog gauge stepper motor control and frequency measurement of road speed / engine RPM inputs. The 128 KB Flash handles the full cluster code (speedometer, tachometer, fuel, temperature, warning icons), while the 8 KB RAM retains current state and dimming curves for daylight/night transitions. The SPI controller drives an external TFT or stepper driver IC, and the I2C port talks to a real-time clock plus external EEPROM for odometer storage. Bus frequency of 8 MHz is adequate for cluster refresh rates under 100 Hz; higher refresh rates than 100 Hz would require a faster S12X upgrade path.
Recommandé
PLC / Industrial Automation
For industrial PLCs and discrete automation, the MC912DG128ACPV's 69 I/O pins support digital input debouncing, relay outputs, and analog sensor scanning via the dual 10-bit ADC in a single-chip solution. The CPU12 CISC architecture executes bit-level scan logic at deterministic rates at 8 MHz; the 128 KB Flash houses ladder logic runtime plus Modbus, and the 8 KB RAM retains scan buffers. The 2 SCI plus 1 SPI plus 1 I2C provide four external comm channels for HMI display, sensors, and a peer-PLC link. For applications needing more I/O, multiple MC912DG128ACPV chips can be linked via SCI as distributed I/O drops, with the extended-temperature grade (DG128ACPVE) supporting cabinetless field mounting.
Recommandé
Smart Sensor / Edge IoT Hub
Building an edge-of-network IoT hub on the MC912DG128ACPV leverages its 16 analog inputs (two 8-channel ADC blocks) plus digital I/O to aggregate multi-sensor data with deterministic scan rates. The 128 KB Flash hosts MQTT-SN or Modbus gateway code, and the 2 KB EEPROM stores per-node calibration constants and security keys that survive power-cycle. The two SCI ports split the field side (RS-485 Modbus) from the cloud side (UART to GSM/WiFi module), while the SPI drives an external flash for log buffering. For battery-powered deployments, the HC12 low-power STOP and WAIT modes at 8 MHz clock extend battery life considerably compared to non-CISC alternatives.
Recommandé
Motor Control (Low-Power BLDC / Stepper)
For low-power BLDC or stepper controllers (e.g., small pumps, fans, solenoid valves), the MC912DG128ACPV's enhanced capture timer with PWM output mode drives half-bridges through gate drivers, while the dual 10-bit ADC samples back-EMF, current sense, and pot inputs at modest PWM frequencies (1-25 kHz). The 8 KB RAM holds rotor state tables and PI controller variables, the 128 KB Flash stores the FOC or trapezoidal commutation algorithm, and the SCI exposes diagnostic and tuning commands to PC tools. The standard 8 MHz bus provides sufficient throughput for trapezoidal control at 10 kHz update rates; for Field-Oriented Control (FOC) at higher loop rates, a faster S12X part is more suitable than this HC12 device.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC912DG128ACPV — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC912DG128ACPVE | MC912DT128ACPV | MC912DG128AVPVE | MC912DG128CCPV |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20) | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same |
| Core | CPU12 (HC12) | CPU12 (HC12) | CPU12 (HC12) | CPU12 (HC12) | CPU12 (HC12) |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB (variant) |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| Number of I/O Pins | 69 | 69 | 69 | 69 | 69 |
| Temperature Grade | -40C to +85C (standard) | -40C to +125C | -40C to +85C | -40C to +125C | -40C to +85C |
| ADC | 2 x 8-channel 10-bit | 2 x 8-channel 10-bit | 2 x 8-channel 10-bit | 2 x 8-channel 10-bit | 2 x 8-channel 10-bit |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principaux différenciateurs
- Same package, identical memory map to MC912DG128ACPVE (vs MC912DG128ACPVE)
- A/B-suffix part variant (vs MC912DG128AVPVE)
- DT vs DG family variant (vs MC912DT128ACPV)
Notes de conception
Verified: When bringing up the BDM (Background Debug Mode) interface on the MC912DG128ACPV, ensure MODA/MODB level transitions match the datasheet's special mode table; wrong mode latches can lock the part. Use the standard sequence: power-up with MODB low selects single-chip mode, then drive MODA to enter mode 2/3 only when invoking BDM. Always de-assert RESET after clock is stable (>= 1 ms) to avoid Flash programming failures during factory programming.
Verified: The MC912DG128ACPV requires both VDD (digital 5V) and VDDR/VSSA/VDDA supplies decoupled separately; place 100 nF ceramics on each VDD/VSS pin pair within 5 mm of the lead, and a bulk 1-10 uF tantalum near the package. Internal PLL requires its own filtered VDDPLL/VSSPLL pair - never share that loop with digital I/O switching. Estimated: VDD current for the entire 112-LQFP at 8 MHz with full I/O toggling is typically 30-50 mA; VDDR drops lower at 1-2 mA for I/O ring bias.
Verified: At 8 MHz with all peripherals enabled, the MC912DG128ACPV dissipates well under 1 W; the 112-LQFP package's exposed thermal characteristics are generally adequate for industrial mounting without an explicit heatsink. However, when placed in a sealed enclosure with no airflow, verify junction temperature stays below 125C using the standard HC12 thermal resistance model in the datasheet. Estimated: thermal resistance theta_JA on a 4-layer JEDEC test board is around 35-45 C/W; with a 0.5 W dissipation this keeps the junction at ambient + 17-22 C.
Informations de conformité
Compliance data not present in verified web sources. Marked 'unknown' rather than guessed. For new designs, verify compliance with the distributor or NXP representative before commitment.
