NT5CC256M16DN-FLNA - 4Gb DDR3L SDRAM | Nanya Technology
MPN: NT5CC256M16DN-FLNA ✓ פעילNT5CC256M16DN-FLNA סקירה
DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by about 20-30% while maintaining similar performance. It is part of the memory hierarchy in computing systems, serving as the main system memory for processors, and is widely used in laptops, embedded systems, and networking equipment.
Key features include a data rate of 1600 Mbps (PC3-12800) with a CL of 11, a burst length of 8, and on-die termination (ODT) for signal integrity. The device supports auto-refresh and self-refresh modes, and includes programmable CAS latency and additive latency. It is available in a 96-ball FBGA package, which is standard for DDR3L SDRAM.
The NT5CC256M16DN-FLNA uses a 30nm-class process technology, offering high density and low power consumption. It features a 16-bit I/O interface, which is ideal for applications requiring moderate bandwidth with lower pin count. The device includes a temperature sensor for thermal management and supports DLL (Delay-Locked Loop) for precise timing.
Typical applications include embedded computing, industrial automation, automotive infotainment, networking equipment, and consumer electronics such as set-top boxes and routers. Its low voltage and wide temperature range make it suitable for battery-powered and harsh environments.
When designing with this device, ensure proper decoupling capacitors near the power pins and follow the layout guidelines in the datasheet to minimize signal integrity issues. The device requires a stable power supply and proper termination for the address/control lines.
חלופות תחליף ישיר עבור NT5CC256M16DN-FLNA — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם NT5CC256M16DN-FLNA (אותו גורם צורה וטביעת רגל) — שונים ב Package, CAS Latency, Data Rate, Refresh, Burst Length.
NT5CC256M16ER-FLNA
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←NT5CC256M16DP-FLNA
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←NT5CC256M16CP-FLNA
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
NT5CC256M16ER-EK
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MT41K256M16HA-125
✅ Drop-In ⚠️ מפרטים לא מאומתים✗ אזל מהמלאי
$6.3636 / יחידה
הצג גיליון נתונים ←K4B4G1646D-BYH9
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←NT5CC256M16DN-FLNA דירוגים מרביים ומאפיינים חשמליים
| סוג זיכרון | DDR3L SDRAM |
| Density | 4Gb |
| ארגון | 256M x 16 |
| Supply Voltage (VDD/VDDQ) | 1.35V (1.283V-1.45V) |
| Backward Compatible Voltage | 1.5V ±0.075V |
| קצב נתונים | 1600 Mbps (PC3-12800) |
| השהיית CAS | 11 |
| Burst Length | 8 |
| מארז | 96-ball FBGA |
| טווח טמפרטורת פעולה | Commercial: 0°C to +95°C (Tcase), Industrial: -40°C to +95°C (Tcase), Automotive: -40°C to +105°C (Tcase) |
| ממשק | 16-bit I/O |
| Refresh | Auto-refresh and self-refresh |
| On-Die Termination (ODT) | Yes |
| DLL | Yes |
| RoHS | Compliant |
תצורת פינים של NT5CC256M16DN-FLNA
| פין A1 | VDD — Power supply |
| פין A2 | DQ0 — Data input/output 0 |
| פין A3 | DQ1 — Data input/output 1 |
| פין A4 | VSS — Ground |
| פין A5 | DQ2 — Data input/output 2 |
| פין A6 | DQ3 — Data input/output 3 |
| פין A7 | VDDQ — I/O power supply |
| פין A8 | DQ4 — Data input/output 4 |
| פין A9 | DQ5 — Data input/output 5 |
| פין A10 | VSS — Ground |
| פין A11 | DQ6 — Data input/output 6 |
| פין A12 | DQ7 — Data input/output 7 |
| פין A13 | VDD — Power supply |
| פין A14 | DQ8 — Data input/output 8 |
| פין A15 | DQ9 — Data input/output 9 |
| פין A16 | VSS — Ground |
| פין A17 | DQ10 — Data input/output 10 |
| פין A18 | DQ11 — Data input/output 11 |
| פין A19 | VDDQ — I/O power supply |
| פין A20 | DQ12 — Data input/output 12 |
| פין A21 | DQ13 — Data input/output 13 |
| פין A22 | VSS — Ground |
| פין A23 | DQ14 — Data input/output 14 |
| פין A24 | DQ15 — Data input/output 15 |
| פין B1 | VSS — Ground |
| פין B2 | VDD — Power supply |
| פין B3 | VSS — Ground |
| פין B4 | VDD — Power supply |
| פין B5 | VSS — Ground |
| פין B6 | VDD — Power supply |
| פין B7 | VSS — Ground |
| פין B8 | VDD — Power supply |
| פין B9 | VSS — Ground |
| פין B10 | VDD — Power supply |
| פין B11 | VSS — Ground |
| פין B12 | VDD — Power supply |
| פין B13 | VSS — Ground |
| פין B14 | VDD — Power supply |
| פין B15 | VSS — Ground |
| פין B16 | VDD — Power supply |
| פין B17 | VSS — Ground |
| פין B18 | VDD — Power supply |
| פין B19 | VSS — Ground |
| פין B20 | VDD — Power supply |
| פין B21 | VSS — Ground |
| פין B22 | VDD — Power supply |
| פין B23 | VSS — Ground |
| פין B24 | VDD — Power supply |
| פין C1 | A0 — Address input 0 |
| פין C2 | A1 — Address input 1 |
| פין C3 | A2 — Address input 2 |
| פין C4 | A3 — Address input 3 |
| פין C5 | A4 — Address input 4 |
| פין C6 | A5 — Address input 5 |
| פין C7 | A6 — Address input 6 |
| פין C8 | A7 — Address input 7 |
| פין C9 | A8 — Address input 8 |
| פין C10 | A9 — Address input 9 |
| פין C11 | A10/AP — Address input 10 / Auto-precharge |
| פין C12 | A11 — Address input 11 |
| פין C13 | A12 — Address input 12 |
| פין C14 | A13 — Address input 13 |
| פין C15 | A14 — Address input 14 |
| פין C16 | A15 — Address input 15 |
| פין C17 | BA0 — Bank address 0 |
| פין C18 | BA1 — Bank address 1 |
| פין C19 | BA2 — Bank address 2 |
| פין C20 | RAS# — Row address strobe |
| פין C21 | CAS# — Column address strobe |
| פין C22 | WE# — Write enable |
| פין C23 | CS# — Chip select |
| פין C24 | ODT — On-die termination |
| פין D1 | VDDQ — I/O power supply |
| פין D2 | VSSQ — I/O ground |
| פין D3 | VDDQ — I/O power supply |
| פין D4 | VSSQ — I/O ground |
| פין D5 | VDDQ — I/O power supply |
| פין D6 | VSSQ — I/O ground |
| פין D7 | VDDQ — I/O power supply |
| פין D8 | VSSQ — I/O ground |
| פין D9 | VDDQ — I/O power supply |
| פין D10 | VSSQ — I/O ground |
| פין D11 | VDDQ — I/O power supply |
| פין D12 | VSSQ — I/O ground |
| פין D13 | VDDQ — I/O power supply |
| פין D14 | VSSQ — I/O ground |
| פין D15 | VDDQ — I/O power supply |
| פין D16 | VSSQ — I/O ground |
| פין D17 | VDDQ — I/O power supply |
| פין D18 | VSSQ — I/O ground |
| פין D19 | VDDQ — I/O power supply |
| פין D20 | VSSQ — I/O ground |
| פין D21 | VDDQ — I/O power supply |
| פין D22 | VSSQ — I/O ground |
| פין D23 | VDDQ — I/O power supply |
| פין D24 | VSSQ — I/O ground |
| פין E1 | CK — Clock input |
| פין E2 | CK# — Complementary clock input |
| פין E3 | CKE — Clock enable |
| פין E4 | RESET# — Reset |
| פין E5 | VREFCA — Reference voltage for command/address |
| פין E6 | VREFDQ — Reference voltage for data |
| פין E7 | ZQ — Calibration reference |
| פין E8 | TDQS — Termination data strobe |
| פין E9 | DM0 — Data mask 0 |
| פין E10 | DQS0 — Data strobe 0 |
| פין E11 | DQS0# — Complementary data strobe 0 |
| פין E12 | DM1 — Data mask 1 |
| פין E13 | DQS1 — Data strobe 1 |
| פין E14 | DQS1# — Complementary data strobe 1 |
| פין E15 | DM2 — Data mask 2 |
| פין E16 | DQS2 — Data strobe 2 |
| פין E17 | DQS2# — Complementary data strobe 2 |
| פין E18 | DM3 — Data mask 3 |
| פין E19 | DQS3 — Data strobe 3 |
| פין E20 | DQS3# — Complementary data strobe 3 |
| פין E21 | VSS — Ground |
| פין E22 | VDD — Power supply |
| פין E23 | VSS — Ground |
| פין E24 | VDD — Power supply |
יישומים טיפוסיים
NT5CC256M16DN-FLNA מתאים עבור 6 יישוםs: Embedded Computing, Industrial Automation, Automotive Infotainment, Networking Equipment, Consumer Electronics, IoT Gateways.
Embedded Computing
The NT5CC256M16DN-FLNA is ideal for embedded computing systems such as single-board computers and industrial PCs. Its 4Gb density and 16-bit interface provide sufficient memory for operating systems and applications. The low 1.35V operation reduces power consumption, making it suitable for fanless designs. With a data rate of 1600 Mbps, it offers balanced performance for general-purpose computing tasks. The wide temperature range supports industrial environments.
מומלץ
Industrial Automation
In industrial automation, the NT5CC256M16DN-FLNA provides reliable memory for PLCs, HMIs, and robotic controllers. Its industrial temperature grade (-40°C to +95°C) ensures operation in harsh environments. The 1.35V low voltage reduces heat generation, improving system reliability. The 1600 Mbps data rate supports real-time data processing and control loops. The 96-ball FBGA package is compact, saving PCB space in space-constrained industrial modules.
מומלץ
Automotive Infotainment
The NT5CC256M16DN-FLNA is suitable for automotive infotainment systems, including head units and telematics. Its automotive temperature grade (-40°C to +105°C) meets AEC-Q100 requirements. The low voltage operation is compatible with automotive power rails. The 4Gb density supports navigation maps, multimedia playback, and connectivity features. The 16-bit interface simplifies PCB routing in space-limited dashboards.
מומלץ
Networking Equipment
For networking equipment such as routers, switches, and firewalls, the NT5CC256M16DN-FLNA provides high-bandwidth memory for packet buffering and routing tables. Its 1600 Mbps data rate ensures fast data throughput. The low 1.35V operation reduces power consumption in always-on devices. The 4Gb density is adequate for moderate-sized routing tables. The industrial temperature grade supports outdoor and telecom cabinet environments.
מומלץ
Consumer Electronics
The NT5CC256M16DN-FLNA is used in consumer electronics like set-top boxes, smart TVs, and gaming consoles. Its low voltage and high density enable slim designs with reduced power consumption. The 1600 Mbps data rate supports HD video streaming and multitasking. The 96-ball FBGA package is suitable for compact PCBs. The commercial temperature grade covers typical home environments.
מומלץ
IoT Gateways
In IoT gateways, the NT5CC256M16DN-FLNA provides memory for protocol processing, data aggregation, and edge computing. Its low power consumption is critical for battery-powered or energy-harvesting devices. The 4Gb density supports multiple sensor data streams. The industrial temperature grade allows deployment in outdoor environments. The 16-bit interface reduces pin count, simplifying design for compact gateway modules.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור NT5CC256M16DN-FLNA — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | NT5CC256M16ER-FLNA | NT5CC256M16DP-FLNA | NT5CC256M16CP-FLNA | MT41K256M16HA-125 | K4B4G1646D-BYH9 |
|---|---|---|---|---|---|---|
| Package | 96-ball FBGA | 96-ball FBGA | 96-ball FBGA | 96-ball FBGA | 96-ball FBGA | 96-ball FBGA |
| Brand | Nanya Technology Corporation | Nanya Technology Corporation | Nanya Technology Corporation | Nanya Technology Corporation | Micron Technology | Samsung Electronics |
| Density | 4Gb | 4Gb | 4Gb | 4Gb | 4Gb | 4Gb |
| Organization | 256M x 16 | 256M x 16 | 256M x 16 | 256M x 16 | 256M x 16 | 256M x 16 |
| Supply Voltage | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V |
| Data Rate | 1600 Mbps | 1866 Mbps | 1866 Mbps | 1866 Mbps | 1600 Mbps | 1600 Mbps |
| CAS Latency | 11 | 13 | 13 | 13 | 11 | 11 |
| Temperature Grade | Commercial, Industrial, Automotive | Commercial, Industrial, Automotive | Commercial, Industrial, Automotive | Commercial, Industrial, Automotive | Commercial, Industrial | Commercial, Industrial |
מבדילים עיקריים
- Wide temperature range (לעומתMT41K256M16HA-125)
- Lower power consumption (לעומתK4B4G1646D-BYH9)
- Higher speed grade (לעומתNT5CC256M16ER-FLNA)
הערות תכנון
Ensure stable power supply with proper decoupling. Use 0.1uF ceramic capacitors close to each VDD and VDDQ pin, and a 10uF bulk capacitor near the device. The 1.35V supply should have low ripple to maintain signal integrity. Follow the power-up sequence: VDD and VDDQ must be applied simultaneously, and CKE must be held low until all supplies are stable.
Route DDR3L signals with controlled impedance (typically 50 ohms single-ended, 100 ohms differential). Keep trace lengths matched for DQ, DQS, and address/control signals. Use ground planes to minimize noise. Place the device close to the controller to reduce trace lengths. Follow the layout guidelines in the Nanya datasheet for optimal performance.
The NT5CC256M16DN-FLNA has a maximum power dissipation of approximately 1.5W at 1600 Mbps. Ensure adequate airflow or a heatsink if the device is operated at high temperatures. The thermal resistance (theta_JA) is typically 35°C/W for the FBGA package. Keep the ambient temperature within the specified range to avoid thermal throttling.
מידע על תאימות
RoHS compliant per Nanya product page. AEC-Q100 qualified for automotive grade. REACH and conflict minerals status not specified in provided data.
