BTS3035TFATMA1 vs BTN9960LVAUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTS3035TFATMA1 द्वारा Infineon और BTN9960LVAUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | BTS3035TFATMA1 | BTN9960LVAUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Motor Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Low-Side Power Switch | Integrated Half-Bridge Motor Driver |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | — |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| ऑपरेटिंग तापमान रेंज | -40C to +150C (junction) | -40C to +150C |
| पैकेज | PG-TO252-3-313 (DPAK) | PG-HSOF-7-1 |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS स्थिति | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| टोपोलॉजी | — | P-channel high-side + N-channel low-side MOSFET with integrated driver IC |
| Path Resistance (typ @ 25C) | — | 9.7 mOhm |
| Overcurrent Detection Threshold | — | 35 A |
| Supply Voltage Range (operating) | — | 8 V to 18 V |
| Supply Voltage Range (max rating) | — | 40 V |
| Logic Input Low Voltage (max) | — | 1.3 V |
| Logic Input High Voltage (min) | — | 1.6 V |
| Turn-On Rise Time (typ) | — | 2.5 us |
| Turn-Off Fall Time (typ) | — | 250 ns |
| Dead Time (typ) | — | 250 ns |
| Standby Current (max) | — | 3.3 uA |
| Propagation Delay (typ) | — | 3.6 us |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Protection Features | — | Under-voltage, Over-current, Short-circuit, Over-temperature, Interleaved (shoot-through), Enable shutdown, Dead-time control |