BTS3035TFATMA1 vs BTN9960LVAUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS3035TFATMA1 disebabkan oleh Infineon dan BTN9960LVAUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS3035TFATMA1 | BTN9960LVAUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Motor Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Low-Side Power Switch | Integrated Half-Bridge Motor Driver |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | — |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Gambaran Suhu Operasi | -40C to +150C (junction) | -40C to +150C |
| Kemasan | PG-TO252-3-313 (DPAK) | PG-HSOF-7-1 |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| Status RoHS | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Tetstruktur | — | P-channel high-side + N-channel low-side MOSFET with integrated driver IC |
| Path Resistance (typ @ 25C) | — | 9.7 mOhm |
| Overcurrent Detection Threshold | — | 35 A |
| Supply Voltage Range (operating) | — | 8 V to 18 V |
| Supply Voltage Range (max rating) | — | 40 V |
| Logic Input Low Voltage (max) | — | 1.3 V |
| Logic Input High Voltage (min) | — | 1.6 V |
| Turn-On Rise Time (typ) | — | 2.5 us |
| Turn-Off Fall Time (typ) | — | 250 ns |
| Dead Time (typ) | — | 250 ns |
| Standby Current (max) | — | 3.3 uA |
| Propagation Delay (typ) | — | 3.6 us |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Protection Features | — | Under-voltage, Over-current, Short-circuit, Over-temperature, Interleaved (shoot-through), Enable shutdown, Dead-time control |