BTS3035TFATMA1 vs BTN9960LVAUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS3035TFATMA1 tarafından Infineon ve BTN9960LVAUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS3035TFATMA1 | BTN9960LVAUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Motor Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Low-Side Power Switch | Integrated Half-Bridge Motor Driver |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | — |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| İşletim Sıcaklığı Aralığı | -40C to +150C (junction) | -40C to +150C |
| Paket | PG-TO252-3-313 (DPAK) | PG-HSOF-7-1 |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS Durumu | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Ağ Yapısı | — | P-channel high-side + N-channel low-side MOSFET with integrated driver IC |
| Path Resistance (typ @ 25C) | — | 9.7 mOhm |
| Overcurrent Detection Threshold | — | 35 A |
| Supply Voltage Range (operating) | — | 8 V to 18 V |
| Supply Voltage Range (max rating) | — | 40 V |
| Logic Input Low Voltage (max) | — | 1.3 V |
| Logic Input High Voltage (min) | — | 1.6 V |
| Turn-On Rise Time (typ) | — | 2.5 us |
| Turn-Off Fall Time (typ) | — | 250 ns |
| Dead Time (typ) | — | 250 ns |
| Standby Current (max) | — | 3.3 uA |
| Propagation Delay (typ) | — | 3.6 us |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Protection Features | — | Under-voltage, Over-current, Short-circuit, Over-temperature, Interleaved (shoot-through), Enable shutdown, Dead-time control |