MCZ33887EKR2 vs MCZ33887EK तुलना

विस्तृत दोनों ओर की तुलना MCZ33887EKR2 द्वारा NXP Semiconductors और MCZ33887EK द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
MCZ33887EKR2 MCZ33887EKR2 - 5A H-Bridge Driver w/ Load Current Feedback | NXP

MCZ33887EKR2 - 5A H-Bridge Driver w/ Load Current Feedback | NXP

MCZ33887EKR2 ✓ सक्रिय
NXP Semiconductors
MCZ33887EK MCZ33887EK - 5A H-Bridge Motor Driver with Load Current Feedback | NXP

MCZ33887EK - 5A H-Bridge Motor Driver with Load Current Feedback | NXP

MCZ33887EK ✓ सक्रिय

विशेषता तुलना

पैरामीटर MCZ33887EKR2 MCZ33887EK
ब्रांड NXP Semiconductors NXP Semiconductors
श्रेणी Motor Drivers Motor Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन H-Bridge motor driver with load current feedback —
आउटपुट कॉन्फ़िगरेशन Full H-Bridge (4 FETs) —
सप्लाई वोल्टेज 5 V to 28 V 5 V to 28 V
Continuous Output Current 5.0 A 5 A
On-State Resistance (RDS(on) per leg) 120 mOhm (typical) —
पैकेज / केस 54-SSOP (0.295 inch / 7.50 mm width) Exposed Pad —
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
Load Current Feedback Yes (analog output proportional to load current) Yes (analog current sense output)
Control Interface Parallel logic (IN1, IN2 / PWM, Enable) Parallel logic (IN1, IN2, EN, D1, D2)
Charge Pump Internal (external capacitor only) —
करंट लिमिट Programmable via external reference resistor —
Fault Protection Overcurrent, overtemperature, undervoltage [DATA_NEEDED: detailed list] —
RoHS स्थिति Compliant [DATA_NEEDED: per latest datasheet revision] Compliant
नमी संवेदनशीलता स्तर (MSL) [DATA_NEEDED: MSL rating] —
Load Type DC motor, solenoid, resistive/inductive —
टोपोलॉजी — H-Bridge (4 N-channel MOSFETs)
Peak Output Current — [DATA_NEEDED: peak current]
On-State Resistance (HS + LS) — 120 mOhm
PWM Frequency (max) — [DATA_NEEDED: max PWM frequency]
Operating Temperature (Junction) — -40 C to +150 C
पैकेज — 54-HSOP (Heatsink SOIC) with Exposed Pad
Thermal Resistance (Theta_JC) — 1.0 C/W
AEC-Q100 Qualification — Qualified
MSL स्तर — 3
Protection Features — Overcurrent, Overtemperature, UVLO, Shoot-Through

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध