MCZ33887EKR2 vs MCZ33887EK So sánh

So sánh chi tiết song song của MCZ33887EKR2 bằng NXP Semiconductors và MCZ33887EK bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MCZ33887EKR2 MCZ33887EKR2 - 5A H-Bridge Driver w/ Load Current Feedback | NXP

MCZ33887EKR2 - 5A H-Bridge Driver w/ Load Current Feedback | NXP

MCZ33887EKR2 ✓ Hoạt động
NXP Semiconductors
MCZ33887EK MCZ33887EK - 5A H-Bridge Motor Driver with Load Current Feedback | NXP

MCZ33887EK - 5A H-Bridge Motor Driver with Load Current Feedback | NXP

MCZ33887EK ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MCZ33887EKR2 MCZ33887EK
Thương hiệu NXP Semiconductors NXP Semiconductors
Danh mục Motor Drivers Motor Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Chức năng H-Bridge motor driver with load current feedback —
Cấu hình đầu ra Full H-Bridge (4 FETs) —
Điện áp cung cấp 5 V to 28 V 5 V to 28 V
Continuous Output Current 5.0 A 5 A
On-State Resistance (RDS(on) per leg) 120 mOhm (typical) —
Hộp / Vỏ 54-SSOP (0.295 inch / 7.50 mm width) Exposed Pad —
Kiểu lắp đặt Surface Mount Surface Mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Load Current Feedback Yes (analog output proportional to load current) Yes (analog current sense output)
Control Interface Parallel logic (IN1, IN2 / PWM, Enable) Parallel logic (IN1, IN2, EN, D1, D2)
Charge Pump Internal (external capacitor only) —
Giới hạn dòng điện Programmable via external reference resistor —
Fault Protection Overcurrent, overtemperature, undervoltage [DATA_NEEDED: detailed list] —
Trạng thái RoHS Compliant [DATA_NEEDED: per latest datasheet revision] Compliant
Cấp độ độ ẩm nhạy cảm (MSL) [DATA_NEEDED: MSL rating] —
Load Type DC motor, solenoid, resistive/inductive —
Cấu trúc — H-Bridge (4 N-channel MOSFETs)
Peak Output Current — [DATA_NEEDED: peak current]
On-State Resistance (HS + LS) — 120 mOhm
PWM Frequency (max) — [DATA_NEEDED: max PWM frequency]
Operating Temperature (Junction) — -40 C to +150 C
Hộp — 54-HSOP (Heatsink SOIC) with Exposed Pad
Thermal Resistance (Theta_JC) — 1.0 C/W
AEC-Q100 Qualification — Qualified
Cấp MSL — 3
Protection Features — Overcurrent, Overtemperature, UVLO, Shoot-Through

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá