MPX5010DP vs MPXV12GW6U तुलना
विस्तृत दोनों ओर की तुलना MPX5010DP द्वारा NXP Semiconductors और MPXV12GW6U द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MPX5010DP | MPXV12GW6U |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Pressure Sensors | Pressure Sensors |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Pressure Type | Differential | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: max overload kPa] | — |
| Sensitivity | 450 mV/kPa (typical) | — |
| आउटपुट वोल्टेज रेंज | 0.2 V to 4.7 V | — |
| सप्लाई वोल्टेज | 4.75 V to 5.25 V (5 V typical) | — |
| सप्लाई करंट | [DATA_NEEDED: supply current mA] | — |
| Linearity | ±1.5% VFSS (typical, 0-85 C) | — |
| ऑपरेटिंग तापमान | 0 C to +85 C (compensated) | -40 C to +125 C |
| Storage Temperature | [DATA_NEEDED: storage temperature C] | — |
| Port Configuration | Dual axial ports, 4.93 mm (0.19 in) tube | — |
| पैकेज | 6-SIP Module | — |
| आउटपुट प्रकार | Analog, ratiometric | Analog Millivolt (Wheatstone bridge) |
| माउंटिंग प्रकार | Through-hole (SIP) | Surface Mount |
| Technology | Piezoresistive, monolithic silicon, on-chip signal conditioned | — |
| RoHS स्थिति | Compliant | Compliant |
| Output Span | — | 0 mV to 55 mV at 3 V excitation |
| Excitation Voltage | — | 3 V typical |
| Pressure Port Type | — | Top port, 0.22" (5.59 mm) tube |
| पैकेज / केस | — | 8-SMD, Gull Wing, Top Port |
| Accuracy | — | [DATA_NEEDED: linearity + temperature coefficient] |
| Configuration | — | Vented Gauge (reference to atmosphere) |
| Sensor Technology | — | Silicon piezoresistive (MEMS strain gauge) |
| Off-Pressure Offset | — | 0 mV minimum (no offset specified) |
| Compensation | — | Uncompensated (external calibration required) |
| MSL स्तर | — | [DATA_NEEDED: MSL rating] |
| Bridge Resistance | — | [DATA_NEEDED: input / output bridge impedance] |
| Typical Sensitivity | — | [DATA_NEEDED: mV/kPa at 3 V] |