MPXV5004GC7U vs MPXV10GC7U तुलना

विस्तृत दोनों ओर की तुलना MPXV5004GC7U द्वारा NXP Semiconductors और MPXV10GC7U द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
MPXV5004GC7U MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U ✓ सक्रिय
NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ सक्रिय

विशेषता तुलना

पैरामीटर MPXV5004GC7U MPXV10GC7U
ब्रांड NXP Semiconductors NXP Semiconductors
श्रेणी Pressure Sensors Pressure Sensors
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 3.92 kPa (0 to 0.57 PSI) 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Maximum Overpressure 16 kPa [DATA_NEEDED: maximum overpressure rating]
सप्लाई वोल्टेज 4.75 V to 5.25 V (5 V typical) 3 V to 6 V (3 V typical excitation)
आउटपुट वोल्टेज रेंज 1 V to 4.9 V —
Sensitivity 1 V/kPa (typical) 3.5 mV/kPa nominal
Accuracy +/- 1.5 percent VFSS —
ऑपरेटिंग तापमान 0 C to +85 C [DATA_NEEDED: operating temperature range]
Storage Temperature -30 C to +100 C —
Port Type Top port tube, 0.13 inch (3.17 mm) diameter —
आउटपुट प्रकार Analog, ratiometric voltage Analog Wheatstone Bridge (uncompensated mV)
पैकेज 8-pin DIP, 0.550 inch (13.97 mm), through-hole 8-DIP (0.550", 13.97 mm) through-hole
Media Compatibility Dry non-corrosive gases Dry non-corrosive gases (reference port vented to ambient)
माउंटिंग प्रकार Through-hole Through-Hole
RoHS स्थिति [DATA_NEEDED: rohs_status] [DATA_NEEDED: RoHS compliance]
Full-Scale Output — 0 mV to 35 mV at 3 V supply
सप्लाई करंट — [DATA_NEEDED: supply current]
Input Impedance — [DATA_NEEDED: bridge input impedance]
Output Impedance — [DATA_NEEDED: bridge output impedance]
Port Style — Top port, 0.13" (3.18 mm) tube inlet
Compensation — None on chip - external calibration required

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध