MPXV5004GC7U vs MPXV10GC7U So sánh

So sánh chi tiết song song của MPXV5004GC7U bằng NXP Semiconductors và MPXV10GC7U bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MPXV5004GC7U MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U ✓ Hoạt động
NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MPXV5004GC7U MPXV10GC7U
Thương hiệu NXP Semiconductors NXP Semiconductors
Danh mục Pressure Sensors Pressure Sensors
Trạng thái vòng đời Hoạt động Hoạt động
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 3.92 kPa (0 to 0.57 PSI) 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Maximum Overpressure 16 kPa [DATA_NEEDED: maximum overpressure rating]
Điện áp cung cấp 4.75 V to 5.25 V (5 V typical) 3 V to 6 V (3 V typical excitation)
Khoảng điện áp đầu ra 1 V to 4.9 V —
Sensitivity 1 V/kPa (typical) 3.5 mV/kPa nominal
Accuracy +/- 1.5 percent VFSS —
Nhiệt độ hoạt động 0 C to +85 C [DATA_NEEDED: operating temperature range]
Storage Temperature -30 C to +100 C —
Port Type Top port tube, 0.13 inch (3.17 mm) diameter —
Kiểu đầu ra Analog, ratiometric voltage Analog Wheatstone Bridge (uncompensated mV)
Hộp 8-pin DIP, 0.550 inch (13.97 mm), through-hole 8-DIP (0.550", 13.97 mm) through-hole
Media Compatibility Dry non-corrosive gases Dry non-corrosive gases (reference port vented to ambient)
Kiểu lắp đặt Through-hole Through-Hole
Trạng thái RoHS [DATA_NEEDED: rohs_status] [DATA_NEEDED: RoHS compliance]
Full-Scale Output — 0 mV to 35 mV at 3 V supply
Điện áp cung cấp — [DATA_NEEDED: supply current]
Input Impedance — [DATA_NEEDED: bridge input impedance]
Output Impedance — [DATA_NEEDED: bridge output impedance]
Port Style — Top port, 0.13" (3.18 mm) tube inlet
Compensation — None on chip - external calibration required

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá