MPXV5004GC7U vs MPXV10GC7U 比較

詳細並排比較 MPXV5004GC7U 由 NXP Semiconductors 與 MPXV10GC7U 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

NXP Semiconductors
MPXV5004GC7U MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U ✓ 啟用中
NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ 啟用中

規格比較

參數 MPXV5004GC7U MPXV10GC7U
品牌 NXP Semiconductors NXP Semiconductors
類別 Pressure Sensors Pressure Sensors
生命週期狀態 啟用中 啟用中
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 3.92 kPa (0 to 0.57 PSI) 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Maximum Overpressure 16 kPa [DATA_NEEDED: maximum overpressure rating]
供應電壓 4.75 V to 5.25 V (5 V typical) 3 V to 6 V (3 V typical excitation)
輸出電壓範圍 1 V to 4.9 V —
Sensitivity 1 V/kPa (typical) 3.5 mV/kPa nominal
Accuracy +/- 1.5 percent VFSS —
工作溫度 0 C to +85 C [DATA_NEEDED: operating temperature range]
Storage Temperature -30 C to +100 C —
Port Type Top port tube, 0.13 inch (3.17 mm) diameter —
輸出類型 Analog, ratiometric voltage Analog Wheatstone Bridge (uncompensated mV)
封裝 8-pin DIP, 0.550 inch (13.97 mm), through-hole 8-DIP (0.550", 13.97 mm) through-hole
Media Compatibility Dry non-corrosive gases Dry non-corrosive gases (reference port vented to ambient)
安裝類型 Through-hole Through-Hole
RoHS 狀態 [DATA_NEEDED: rohs_status] [DATA_NEEDED: RoHS compliance]
Full-Scale Output — 0 mV to 35 mV at 3 V supply
供應電流 — [DATA_NEEDED: supply current]
Input Impedance — [DATA_NEEDED: bridge input impedance]
Output Impedance — [DATA_NEEDED: bridge output impedance]
Port Style — Top port, 0.13" (3.18 mm) tube inlet
Compensation — None on chip - external calibration required

資料表與資源

瀏覽所有產品 建立 BOM 索取報價