MPXV5004GC7U vs MPXV10GC7U Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPXV5004GC7U disebabkan oleh NXP Semiconductors dan MPXV10GC7U disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP
MPXV5004GC7U ✓ AktifPengandingan Spesifikasi
| Parametr | MPXV5004GC7U | MPXV10GC7U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 3.92 kPa (0 to 0.57 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overpressure | 16 kPa | [DATA_NEEDED: maximum overpressure rating] |
| Tegangan Pemberi Arus | 4.75 V to 5.25 V (5 V typical) | 3 V to 6 V (3 V typical excitation) |
| Gambaran Tegangan Output | 1 V to 4.9 V | — |
| Sensitivity | 1 V/kPa (typical) | 3.5 mV/kPa nominal |
| Accuracy | +/- 1.5 percent VFSS | — |
| Suhu Operasi | 0 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Storage Temperature | -30 C to +100 C | — |
| Port Type | Top port tube, 0.13 inch (3.17 mm) diameter | — |
| Jenis Output | Analog, ratiometric voltage | Analog Wheatstone Bridge (uncompensated mV) |
| Kemasan | 8-pin DIP, 0.550 inch (13.97 mm), through-hole | 8-DIP (0.550", 13.97 mm) through-hole |
| Media Compatibility | Dry non-corrosive gases | Dry non-corrosive gases (reference port vented to ambient) |
| Jenis Pemasangan | Through-hole | Through-Hole |
| Status RoHS | [DATA_NEEDED: rohs_status] | [DATA_NEEDED: RoHS compliance] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Arus Pemberi Arus | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Compensation | — | None on chip - external calibration required |