TLE94104EPXUMA1 vs BTS70402EPGXUMA1 Perbandingan

Perbandingan bersamaan detil TLE94104EPXUMA1 dari Infineon dan BTS70402EPGXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum TLE94104EPXUMA1 BTS70402EPGXUMA1
Merek Infineon Infineon
Kategori Motor Drivers Power MOSFET Drivers
Status Lingkungan Hidup Aktif Aktif
Product Type Half-Bridge (4) Driver for DC Motors —
Topologi Quad Half-Bridge (4x N-channel high-side + low-side MOSFETs integrated) —
Logic Supply Voltage (VCC) 3 V to 5.5 V —
Motor Supply Voltage (VS) 5.5 V to 20 V —
Konfigurasi Output Half-Bridge (4) - parallelable to 2x H-Bridge High-side, N-channel MOSFET
Antarmuka 16-bit SPI, daisy-chain capable —
Suhu Hubung Kerja -40 C to +150 C —
Protection Features Over-Temperature, Over-Current, Short-Circuit, Open-Load Detection Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Paket PG-TSDSO-14 (14-pin with exposed pad) PG-TSDSO-14 (exposed thermal pad)
Tipe Mounting Surface Mount Surface Mount
Level MSL 2A —
Status RoHS Compliant —
Jumlah Output 4 half-bridge channels —
Automotive Qualification AEC-Q100 grade-0 capable (Tj = 150 C) —
Slew Rate Control Configurable via SPI —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
Fungsi — Smart High-Side Power Switch
Number of Channels — 4
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
Rentang Suhu Kerja — -40 °C to +150 °C junction
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon