TLE94104EPXUMA1 vs BTS70402EPGXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng TLE94104EPXUMA1 sa pamamagitan ng Infineon at BTS70402EPGXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon
BTS70402EPGXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | TLE94104EPXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Motor Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Half-Bridge (4) Driver for DC Motors | — |
| Topolohiya | Quad Half-Bridge (4x N-channel high-side + low-side MOSFETs integrated) | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Motor Supply Voltage (VS) | 5.5 V to 20 V | — |
| Output Kumpigurasyon | Half-Bridge (4) - parallelable to 2x H-Bridge | High-side, N-channel MOSFET |
| Interface | 16-bit SPI, daisy-chain capable | — |
| Temperature ng Junction na Operasyon | -40 C to +150 C | — |
| Protection Features | Over-Temperature, Over-Current, Short-Circuit, Open-Load Detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Packhaging | PG-TSDSO-14 (14-pin with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | 2A | — |
| Tindminan RoHS | Compliant | — |
| Bilang ng Outputs | 4 half-bridge channels | — |
| Automotive Qualification | AEC-Q100 grade-0 capable (Tj = 150 C) | — |
| Slew Rate Control | Configurable via SPI | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fungsi | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Hanay ng Temperature na Operasyon | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |