EPM570T144C5 - 440-Macrocell MAX II CPLD, 5.4ns, 144-TQFP | Intel
MPN: EPM570T144C5 ✓ AktifEPM570T144C5 Ringkasan
A CPLD (Complex Programmable Logic Device) is a non-volatile, flash-backed programmable logic device that sits between simple PLDs (PAL/GAL) and larger FPGAs. The MAX II family uses a look-up-table (LUT) based logic array on a 0.18 µm process and is positioned for low-power, low-cost glue-logic, bus-bridging, I/O expansion, and power-sequencing tasks. Within the broader programmable-logic hierarchy, MAX II belongs to: CPLD → programmable logic device (PLD) → logic IC → integrated circuit → semiconductor.
Key features include 440 macrocells, up to 116 user I/Os (TQFP-144), 5.4 ns pin-to-pin propagation delay, JTAG/IEEE 1149.1 boundary-scan support, ISP (in-system programmability) via JTAG, multi-voltage I/O supporting 1.5 V, 1.8 V, 2.5 V and 3.3 V interfaces, and instant-on (under 1 ms) non-volatile configuration. The device also offers on-chip flash configuration memory, eliminating the need for external boot ROM.
Typical applications include bus-bridging logic (e.g., PCI to local bus), I/O expansion and voltage translation between 3.3 V and 1.8 V domains, power-up sequencing and reset distribution, LED display driving, address decoding in microcontroller systems, and general-purpose glue-logic replacement on industrial and consumer motherboards.
When designing with the EPM570T144C5, observe the 1.8 V VCCINT core supply requirement and use level-shifted I/O banks to interface with mixed-voltage peripherals. The TQFP-144 footprint is shared with several other MAX II and MAX II Z variants, simplifying PCB reuse across density options.
Alternatif penggantian untuk EPM570T144C5 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EPM570T144C5 (sama faktor bentuk dan footprint) — berbeda di dalam Programming Interface, Package, Operating Temperature, Process Technology, Maximum User I/O Pins.
EPM570T144C4N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM570T144C4
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM570T144C3N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM570T144C3
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM570T144A5N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM570GT144C5N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM570GT144C5
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM570GT144C4N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM570T144C5 Rating Maksimal & Karakteristik Listrik
| Family | MAX II |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macro Cells | 440 |
| Pin-to-Pin Delay (tPD) | 5.4 ns |
| Maximum Internal Frequency | 201.1 MHz |
| User I/Os | 116 |
| Total Package Pins | 144 |
| Paket / Case | 144-TQFP (TQFP-144) |
| I/O Supply Voltage (VCCIO) | 2.5 V / 3.3 V (multi-voltage I/O supported) |
| Configuration Memory | On-chip flash (non-volatile, instant-on) |
| Programming Interface | JTAG (IEEE 1149.1), ISP |
| Process Technology | 0.18 µm CMOS |
| Suhu Kerja | Commercial (0 °C to +85 °C) |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
Konfigurasi Pin EPM570T144C5
| Pin produk 1 | I/O — User I/O pin (bank 1) |
| Pin produk 2 | I/O — User I/O pin (bank 1) |
| Pin produk 3 | I/O — User I/O pin (bank 1) |
| Pin produk 4 | I/O — User I/O pin (bank 1) |
| Pin produk 5 | I/O — User I/O pin (bank 1) |
| Pin produk 6 | GND — Ground |
| Pin produk 7 | I/O — User I/O pin (bank 1) |
| Pin produk 8 | I/O — User I/O pin (bank 1) |
| Pin produk 9 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 10 | I/O — User I/O pin (bank 1) |
| Pin produk 11 | I/O — User I/O pin (bank 1) |
| Pin produk 12 | I/O — User I/O pin (bank 1) |
| Pin produk 13 | I/O — User I/O pin (bank 1) |
| Pin produk 14 | I/O — User I/O pin (bank 1) |
| Pin produk 15 | I/O — User I/O pin (bank 1) |
| Pin produk 16 | I/O — User I/O pin (bank 1) |
| Pin produk 17 | I/O — User I/O pin (bank 1) |
| Pin produk 18 | I/O — User I/O pin (bank 1) |
| Pin produk 19 | I/O — User I/O pin (bank 2) |
| Pin produk 20 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 21 | I/O — User I/O pin (bank 2) |
| Pin produk 22 | I/O — User I/O pin (bank 2) |
| Pin produk 23 | I/O — User I/O pin (bank 2) |
| Pin produk 24 | I/O — User I/O pin (bank 2) |
| Pin produk 25 | I/O — User I/O pin (bank 2) |
| Pin produk 26 | I/O — User I/O pin (bank 2) |
| Pin produk 27 | I/O — User I/O pin (bank 2) |
| Pin produk 28 | GND — Ground |
| Pin produk 29 | I/O — User I/O pin (bank 2) |
| Pin produk 30 | I/O — User I/O pin (bank 2) |
| Pin produk 31 | I/O — User I/O pin (bank 2) |
| Pin produk 32 | I/O — User I/O pin (bank 2) |
| Pin produk 33 | I/O — User I/O pin (bank 2) |
| Pin produk 34 | I/O — User I/O pin (bank 2) |
| Pin produk 35 | I/O — User I/O pin (bank 2) |
| Pin produk 36 | I/O — User I/O pin (bank 2) |
| Pin produk 37 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 38 | I/O — User I/O pin (bank 2) |
| Pin produk 39 | I/O — User I/O pin (bank 3) |
| Pin produk 40 | I/O — User I/O pin (bank 3) |
| Pin produk 41 | GND — Ground |
| Pin produk 42 | I/O — User I/O pin (bank 3) |
| Pin produk 43 | I/O — User I/O pin (bank 3) |
| Pin produk 44 | I/O — User I/O pin (bank 3) |
| Pin produk 45 | I/O — User I/O pin (bank 3) |
| Pin produk 46 | I/O — User I/O pin (bank 3) |
| Pin produk 47 | I/O — User I/O pin (bank 3) |
| Pin produk 48 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 49 | I/O — User I/O pin (bank 3) |
| Pin produk 50 | I/O — User I/O pin (bank 3) |
| Pin produk 51 | I/O — User I/O pin (bank 3) |
| Pin produk 52 | I/O — User I/O pin (bank 3) |
| Pin produk 53 | I/O — User I/O pin (bank 3) |
| Pin produk 54 | I/O — User I/O pin (bank 3) |
| Pin produk 55 | I/O — User I/O pin (bank 3) |
| Pin produk 56 | GND — Ground |
| Pin produk 57 | I/O — User I/O pin (bank 3) |
| Pin produk 58 | I/O — User I/O pin (bank 3) |
| Pin produk 59 | I/O — User I/O pin (bank 3) |
| Pin produk 60 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 61 | I/O — User I/O pin (bank 4) |
| Pin produk 62 | I/O — User I/O pin (bank 4) |
| Pin produk 63 | I/O — User I/O pin (bank 4) |
| Pin produk 64 | I/O — User I/O pin (bank 4) |
| Pin produk 65 | I/O — User I/O pin (bank 4) |
| Pin produk 66 | I/O — User I/O pin (bank 4) |
| Pin produk 67 | I/O — User I/O pin (bank 4) |
| Pin produk 68 | GND — Ground |
| Pin produk 69 | I/O — User I/O pin (bank 4) |
| Pin produk 70 | VCCIO4 — I/O bank 4 supply voltage |
| Pin produk 71 | I/O — User I/O pin (bank 4) |
| Pin produk 72 | I/O — User I/O pin (bank 4) |
| Pin produk 73 | I/O — User I/O pin (bank 4) |
| Pin produk 74 | I/O — User I/O pin (bank 4) |
| Pin produk 75 | I/O — User I/O pin (bank 4) |
| Pin produk 76 | I/O — User I/O pin (bank 4) |
| Pin produk 77 | I/O — User I/O pin (bank 4) |
| Pin produk 78 | I/O — User I/O pin (bank 4) |
| Pin produk 79 | GND — Ground |
| Pin produk 80 | I/O — User I/O pin (bank 4) |
| Pin produk 81 | VCCIO4 — I/O bank 4 supply voltage |
| Pin produk 82 | I/O — User I/O pin (bank 4) |
| Pin produk 83 | I/O — User I/O pin (bank 4) |
| Pin produk 84 | I/O — User I/O pin (bank 4) |
| Pin produk 85 | I/O — User I/O pin (bank 4) |
| Pin produk 86 | I/O — User I/O pin (bank 4) |
| Pin produk 87 | I/O — User I/O pin (bank 4) |
| Pin produk 88 | TDI — JTAG Test Data In |
| Pin produk 89 | TMS — JTAG Test Mode Select |
| Pin produk 90 | TCK — JTAG Test Clock |
| Pin produk 91 | GND — Ground |
| Pin produk 92 | VCCINT — Core supply voltage (1.8 V typical) |
| Pin produk 93 | I/O — User I/O pin (bank 4) |
| Pin produk 94 | I/O — User I/O pin (bank 4) |
| Pin produk 95 | I/O — User I/O pin (bank 4) |
| Pin produk 96 | I/O — User I/O pin (bank 4) |
| Pin produk 97 | I/O — User I/O pin (bank 1) |
| Pin produk 98 | I/O — User I/O pin (bank 1) |
| Pin produk 99 | GND — Ground |
| Pin produk 100 | I/O — User I/O pin (bank 1) |
| Pin produk 101 | I/O — User I/O pin (bank 1) |
| Pin produk 102 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 103 | I/O — User I/O pin (bank 1) |
| Pin produk 104 | I/O — User I/O pin (bank 1) |
| Pin produk 105 | I/O — User I/O pin (bank 1) |
| Pin produk 106 | I/O — User I/O pin (bank 1) |
| Pin produk 107 | I/O — User I/O pin (bank 1) |
| Pin produk 108 | I/O — User I/O pin (bank 1) |
| Pin produk 109 | I/O — User I/O pin (bank 1) |
| Pin produk 110 | I/O — User I/O pin (bank 1) |
| Pin produk 111 | GND — Ground |
| Pin produk 112 | I/O — User I/O pin (bank 1) |
| Pin produk 113 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 114 | I/O — User I/O pin (bank 1) |
| Pin produk 115 | I/O — User I/O pin (bank 1) |
| Pin produk 116 | I/O — User I/O pin (bank 1) |
| Pin produk 117 | I/O — User I/O pin (bank 1) |
| Pin produk 118 | I/O — User I/O pin (bank 1) |
| Pin produk 119 | I/O — User I/O pin (bank 1) |
| Pin produk 120 | I/O — User I/O pin (bank 1) |
| Pin produk 121 | I/O — User I/O pin (bank 1) |
| Pin produk 122 | GND — Ground |
| Pin produk 123 | I/O — User I/O pin (bank 1) |
| Pin produk 124 | TDO — JTAG Test Data Out |
| Pin produk 125 | I/O — User I/O pin (bank 1) |
| Pin produk 126 | VCCINT — Core supply voltage (1.8 V typical) |
| Pin produk 127 | I/O — User I/O pin (bank 1) |
| Pin produk 128 | I/O — User I/O pin (bank 1) |
| Pin produk 129 | I/O — User I/O pin (bank 1) |
| Pin produk 130 | I/O — User I/O pin (bank 1) |
| Pin produk 131 | I/O — User I/O pin (bank 1) |
| Pin produk 132 | I/O — User I/O pin (bank 1) |
| Pin produk 133 | I/O — User I/O pin (bank 1) |
| Pin produk 134 | GND — Ground |
| Pin produk 135 | I/O — User I/O pin (bank 1) |
| Pin produk 136 | I/O — User I/O pin (bank 1) |
| Pin produk 137 | I/O — User I/O pin (bank 1) |
| Pin produk 138 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 139 | I/O — User I/O pin (bank 1) |
| Pin produk 140 | I/O — User I/O pin (bank 1) |
| Pin produk 141 | I/O — User I/O pin (bank 1) |
| Pin produk 142 | I/O — User I/O pin (bank 1) |
| Pin produk 143 | I/O — User I/O pin (bank 1) |
| Pin produk 144 | I/O — User I/O pin (bank 1) |
Aplikasi Umum
EPM570T144C5 cocok untuk 7 aplikasis: Bus Bridging and Voltage Translation, I/O Expansion for Microcontrollers, Power Sequencing and Reset Distribution, Address Decoding and Chip-Select Generation, Industrial Control and Factory Automation, Consumer Electronics and Display Driving, Communications Equipment Glue Logic.
Bus Bridging and Voltage Translation
The EPM570T144C5 is well-suited to bus-bridging and voltage-level translation between mismatched logic domains because of its 116 user I/Os and multi-voltage I/O bank support (1.5/1.8/2.5/3.3 V). Its 5.4 ns pin-to-pin delay comfortably handles PCI, local-bus, and asynchronous memory interfaces without metastability risk. Placed between a 3.3 V microcontroller and 1.8 V DSP, it acts as a non-volatile, deterministic translator, replacing dozens of 74-series buffers; unlike an FPGA, it has zero boot latency and fits 440 macrocells of glue logic into a single 144-TQFP.
Direkomendasikan
I/O Expansion for Microcontrollers
The EPM570T144C5 expands GPIO-limited microcontrollers by adding up to 116 user I/Os with JTAG-reprogrammable routing, ideal when the host MCU has insufficient pins for keypads, LEDs, and peripheral strobes. Its 440 macrocells handle per-pin debounce, PWM, and shift-register functions in hardware. Powered from a 2.5 V rail, the device complements 3.3 V MCUs by offloading real-time I/O tasks with deterministic 5.4 ns latency, freeing the MCU CPU for higher-level application code.
Direkomendasikan
Power Sequencing and Reset Distribution
The EPM570T144C5 generates and distributes multi-rail power-up/power-down sequencing for systems with strict rail-order requirements (e.g., processors requiring core-before-I/O). Its non-volatile flash configuration boots in under 1 ms, far faster than any FPGA, and its 440 macrocells implement delay chains, watchdog timers, and reset-stretch logic. Typical use: sequencing a 1.0 V core, 1.8 V DDR, and 3.3 V I/O with individually programmable delay and fault handling.
Direkomendasikan
Address Decoding and Chip-Select Generation
The EPM570T144C5 replaces legacy 74-series address-decoder trees with a single 144-TQFP CPLD, generating up to 8-12 qualified chip-selects from a host address bus. Its 5.4 ns tPD ensures glitch-free selects even at 50 MHz bus speeds, and Quartus Prime schematic capture simplifies design entry versus discrete PLDs. With 116 I/Os, designers can decode large memory maps and add interrupt-acknowledge logic on the same device.
Direkomendasikan
Industrial Control and Factory Automation
The EPM570T144C5 drives digital I/O in PLCs, motor-control interfaces, and factory-automation backplanes thanks to its 116 I/Os and configurable logic blocks for state machines, encoder counters, and safety interlocks. Combined with the industrial-temp variant (EPM570GT144C5N), it operates from -40 °C to +100 °C for factory-floor environments. The 0.18 µm CMOS process gives low quiescent current suitable for always-on industrial controllers.
Direkomendasikan
Consumer Electronics and Display Driving
The EPM570T144C5 is used in consumer electronics for LED matrix driving, LCD timing control, button scanning, and IR-protocol decoding on cost-sensitive mainboards. Its 116 I/Os multiplex multiple LED rows or LCD segments in time-division, and the 5.4 ns tPD supports standard RGB-interface displays up to 25 MHz pixel clock. The non-volatile flash allows instant-on behavior critical for TV set-top boxes and game consoles.
Direkomendasikan
Communications Equipment Glue Logic
In routers, switches, and wireless base stations, the EPM570T144C5 acts as glue logic between network processors, PHYs, and SERDES devices, generating frame-sync pulses, LED status indicators, and watchdog strobes. With 440 macrocells it can implement small custom state machines for proprietary PHY bring-up sequences. Multi-voltage I/O support bridges 1.8 V SERDES, 2.5 V PHY, and 3.3 V management interfaces without external level shifters.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EPM570T144C5 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EPM570T144C4N | EPM570T144C3N | EPM570T144A5N | EPM570GT144C5N | EPM570GT144C5 |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 144-TQFP | 144-TQFP - same | 144-TQFP - same | 144-TQFP - same | 144-TQFP - same | 144-TQFP - same |
| Macro Cells | 440 | 440 | 440 | 440 | 440 | 440 |
| Pin-to-Pin Delay (tPD) | 5.4 ns | 4.5 ns (faster) | 3.3 ns (fastest) | 5.4 ns (same) | 5.4 ns (same) | 5.4 ns (same) |
| User I/Os | 116 | 116 | 116 | 116 | 116 | 116 |
| Temperature Grade | Commercial (0 to +85 °C) | Commercial (0 to +85 °C) | Commercial (0 to +85 °C) | Automotive (-40 to +125 °C) | Industrial (-40 to +100 °C) | Industrial (-40 to +100 °C) |
| Lead-Free (Pb-Free) | No (C5 is SnPb; C5N is lead-free) | Yes (C4N suffix) | Yes (C3N suffix) | Yes (A5N suffix) | Yes (C5N suffix) | No |
| Configuration Memory | On-chip flash (non-volatile) | On-chip flash (non-volatile) | On-chip flash (non-volatile) | On-chip flash (non-volatile) | On-chip flash (non-volatile) | On-chip flash (non-volatile) |
Diferensiator Kunci
- Same-family speed-grade options in identical 144-TQFP pinout (vsEPM570T144C4N / EPM570T144C3N)
- Industrial temperature variant (EPM570GT144C5) for harsh environments (vsEPM570T144C5 (commercial))
- Automotive-grade variant (EPM570T144A5N) for AEC-Q100 designs (vsEPM570T144C5 (commercial))
Catatan Desain
Estimated: The EPM570T144C5 requires VCCINT (core, 1.8 V typical) and VCCIO (I/O banks, 1.5/1.8/2.5/3.3 V) rails. Each VCCIO bank can run independently for mixed-voltage I/O. Decouple each VCCIO/VCCINT pin with a 0.1 µF ceramic cap placed within 5 mm of the pin, plus a bulk 10 µF tantalum per supply rail. Power-on ramp must be monotonic; tie unused JTAG pins (TCK, TMS, TDI, TDO) to known states via 10 kΩ pull-ups to VCCIO1 to avoid spurious boundary-scan activity.
Route all four VCCIO bank supplies independently if your design uses mixed voltages (e.g., 3.3 V for bank 1, 1.8 V for bank 2). Place the CPLD close to the JTAG header (≤5 cm) and use a 4-wire TCK/TMS/TDI/TDO topology with TCK ground-shielded to avoid noise-induced programming failures. Leave pin 1 dot indicator visible for assembly orientation. Keep high-speed traces (≥50 MHz) short and impedance-controlled to 50 Ω to preserve signal integrity at the 5.4 ns tPD edge rate.
Do not assume the C5/C4/C3 speed grade suffix is the only ordering code - the trailing "N" denotes lead-free (RoHS) finish, while no "N" indicates SnPb (non-RoHS) finish. RoHS-compliant designs MUST order the C5N variant or equivalent. Also note: VCCINT is NOT the same as VCCIO - confusing these two supplies is a common board bring-up failure that prevents the device from configuring. Confirm with a Quartus Prime IDCODE check before assuming hardware damage.
Informasi Konformitas
EPM570T144C5 (without 'N' suffix) is non-RoHS (SnPb finish). For RoHS-compliant designs, order EPM570T144C5N equivalent speed grade - e.g., EPM570T144C4N. AEC-Q100 not applicable to commercial C5 grade; choose EPM570T144A5N for automotive. Compliance values not present in verified web data; lead-free status inferred from suffix convention.
