MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP MK60DN512ZVLQ10 oleh NXP Semiconductors - komponen elektronik
NXP Semiconductors

MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP

MPN: MK60DN512ZVLQ10 ✗ Akhir Hidup
1.71 V to 3.6 V Vdss 144-LQFP (20x20 mm) Package 100 MHz Speed 512 KB Memory
Ajukan Diskon
MOQ: 1 |
Lihat Datasheet (PDF) Lihat Alternatif

MK60DN512ZVLQ10 Ringkasan

The NXP MK60DN512ZVLQ10 is a Kinetis K60 100MHz ARM Cortex-M4 microcontroller with 512KB Flash, 128KB SRAM, Full-Speed USB, and 10/100 Ethernet in a 144-LQFP (20x20mm) package. It integrates an IEEE 1588 Ethernet MAC, hardware encryption, and a rich peripheral set targeting industrial connectivity and human-machine interface applications.

A microcontroller (MCU) is a single-chip computing system that integrates a CPU core, program and data memory, peripherals, and I/O into one IC. The K60 family belongs to the wider ARM Cortex-M4 microcontroller hierarchy -> 32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor. Cortex-M4 cores add single-precision floating-point and DSP extensions, positioning K60 parts between deterministic Cortex-M3 controllers and higher-end Cortex-M7 application processors.

Key features of the MK60DN512ZVLQ10 include 100MHz Cortex-M4 core with FPU and DSP instructions, 512KB program flash, 128KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamping, USB 2.0 Full-Speed with device/host/on-the-go, CAN, I2C, SPI, UART, 16-bit ADC, DAC, comparators, and an LCD controller. The 144-LQFP package provides extensive I/O counts for industrial human-machine interface panels.

The device operates from 1.71V to 3.6V across -40C to +105C industrial temperature range. Its 90nm low-leakage CMOS process and integrated voltage regulator permit single-supply operation with flexible power modes (Run, Wait, Stop, VLPR, VLLS). The Ethernet and USB peripherals share a sophisticated DMA fabric that offloads packet handling from the core.

Typical applications include industrial Ethernet gateways and PLCs with IEEE 1588 precision-time-protocol support, smart energy meters, building-automation controllers, USB-to-UART bridge adapters, factory automation HMI touch panels, and point-of-sale terminals. The integrated LCD controller is particularly useful for monochrome segment and dot-matrix displays in metering and appliance panels.

Designers should plan for decoupling capacitor placement per K60 hardware design guide; an external 32.768kHz crystal is recommended for RTC and the Ethernet timestamp clock. Migration from the earlier MK60DN512VLQ10 (initial silicon) to MK60DN512ZVLQ10 (current silicon) is a true drop-in replacement per NXP community thread confirmation.

This page synthesizes distributor pricing, drop-in Kinetis K60 family alternatives, and practical design notes across MCU selection, peripheral allocation, and power-mode configuration not consolidated on any single manufacturer page.

Alternatif penggantian untuk MK60DN512ZVLQ10 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MK60DN512ZVLQ10 (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, USB, Operating Temperature Range, Core Architecture.

NXP Semiconductors
Package: WLCSP
ADC: 16-bit integrated
USB: USB 2.0 Full-Speed OTG
Bandingkan dengan MK60DN512ZVLQ10 →
NXP Semiconductors
Package: 80-LQFP (12x12 mm)
ADC: 16-bit SAR
USB: Full-Speed USB 2.0 Device
Bandingkan dengan MK60DN512ZVLQ10 →
NXP Semiconductors
Package: 144-MAPBGA (13 x 13 mm)
USB: Full-Speed USB 2.0 OTG
Bandingkan dengan MK60DN512ZVLQ10 →
NXP Semiconductors
Package: 80-LQFP (12x12 mm)
ADC: 16-bit SAR, up to 1 MSPS
USB: Full-Speed USB OTG with on-chip transceiver
Bandingkan dengan MK60DN512ZVLQ10 →
NXP Semiconductors
Package: 144-pin LQFP (20 x 20 mm)
Operating Temperature Range: -40 C to +85 C (industrial)
Bandingkan dengan MK60DN512ZVLQ10 →
NXP Semiconductors
Package: 144-LQFP (20 x 20 mm)
ADC: 16-bit SAR ADC (up to 27 channels, family-typical)
USB: USB 2.0 Full-Speed OTG, device + host
Bandingkan dengan MK60DN512ZVLQ10 →
NXP Semiconductors
Package: 144-LQFP (20 mm x 20 mm)
ADC: 16-bit SAR ADC
USB: USB 2.0 Full-Speed OTG
Bandingkan dengan MK60DN512ZVLQ10 →
NXP Semiconductors
Package: 121-MAPBGA (8 mm x 8 mm)
Operating Temperature Range: -40 C to +85 C
Bandingkan dengan MK60DN512ZVLQ10 →
NXP Semiconductors
Package: 144-pin MAP-BGA (13 x 13 mm, 0.8 mm pitch)
ADC: Dual 16-bit SAR, up to 4 Msps
USB: USB 2.0 Full-Speed OTG with on-chip transceiver
Bandingkan dengan MK60DN512ZVLQ10 →

MK60DN512ZVLQ10R

✅ Drop-In
📦 144-LQFP (20x20)
same silicon die, tape-and-reel packaging variant only

📋 Alternatif referensi (tidak dalam katalog)

MK60DN512VLQ10

✅ Drop-In
NXP Semiconductors
📦 144-LQFP (20x20)
ARM Cortex-M4 with FPU · 100 MHz · 32-bit · 512 KB (512K x 8) · 128 KB · 1.71 V to 3.6 V · -40C to +105C · 144-LQFP (20 mm x 20 mm)

Kontak untuk harga

Lihat Datasheet →

MK60DN512ZVLQ12

✅ Drop-In
📦 144-LQFP (20x20)
extended temperature grade variant; same package, same peripherals

📋 Alternatif referensi (tidak dalam katalog)

MK60DN512ZVLL10

✅ Drop-In
📦 100-LQFP
100-LQFP instead of 144-LQFP; -44 pins, requires PCB layout change

📋 Alternatif referensi (tidak dalam katalog)

MK40DN512ZVMD10

✅ Drop-In
NXP Semiconductors
📦 144-LQFP
ARM Cortex-M4 · 32-bit · 100 MHz · 512 KB (512K x 8) · 128 KB · 1.71 V to 3.6 V · 1.8 V / 2.5 V / 3.3 V · 52

Kontak untuk harga

Lihat Datasheet →

MK60DN512ZVLQ10 Rating Maksimal & Karakteristik Listrik

Core Architecture ARM Cortex-M4 with FPU and DSP
Maximum CPU Frequency 100 MHz
Program Flash Memory 512 KB
SRAM 128 KB
Supply Voltage Range 1.71 V to 3.6 V
Rentang Suhu Kerja -40 C to +105 C
Package Type 144-LQFP (20x20 mm)
Ethernet MAC 10/100 Mbps with IEEE 1588
USB Controller USB 2.0 Full-Speed, Device/Host/OTG
CAN Modules 1 x CAN
ADC 16-bit, multiple channels
DAC 12-bit
Timers Multiple FTM, PIT, LPTMR, RTC
Communication Peripherals UART, SPI, I2C, I2S
LCD Controller Yes (segment and dot-matrix)
Jumlah Pin 144
Tipe Mounting Surface Mount
Level MSL 3 (per JEDEC J-STD-020)
Status RoHS Compliant

Konfigurasi Pin MK60DN512ZVLQ10

LQFP-144 Package Pinout Diagram LQFP-144 20x20mm, P0.5mm, JEDEC MS-026. 1 36 LQFP-144
Pin produk 1 PTE0 — General-purpose I/O / UART1 TX
Pin produk 2 PTE1 — General-purpose I/O / UART1 RX
Pin produk 3 PTE2 — General-purpose I/O / SPI
Pin produk 4 PTE3 — General-purpose I/O / SPI
Pin produk 5 PTE4 — General-purpose I/O / SPI
Pin produk 6 PTE5 — General-purpose I/O / SPI
Pin produk 7 PTE6 — General-purpose I/O / I2C
Pin produk 8 PTE7 — General-purpose I/O / I2C
Pin produk 9 VSS — Ground
Pin produk 10 USB0_DP — USB 2.0 Full-Speed data plus
Pin produk 11 USB0_DM — USB 2.0 Full-Speed data minus
Pin produk 12 USB0_VBUS — USB VBUS detect
Pin produk 13 VREGIN — Voltage regulator input (1.71V to 3.6V)
Pin produk 14 VDD — Digital supply
Pin produk 15 VSS — Ground
Pin produk 16 PTA0 — JTAG TCLK / SWD CLK
Pin produk 17 PTA1 — JTAG TDI
Pin produk 18 PTA2 — JTAG TDO / SWD IO
Pin produk 19 PTA3 — JTAG TMS / SWD DIO
Pin produk 20 PTA4 — General-purpose I/O / NMI
Pin produk 21 PTA5 — General-purpose I/O
Pin produk 22 PTA6 — General-purpose I/O
Pin produk 23 PTA7 — General-purpose I/O
Pin produk 24 PTA8 — General-purpose I/O
Pin produk 25 PTA9 — General-purpose I/O
Pin produk 26 PTA10 — General-purpose I/O
Pin produk 27 PTA11 — General-purpose I/O
Pin produk 28 PTA12 — General-purpose I/O
Pin produk 29 PTA13 — General-purpose I/O
Pin produk 30 PTA14 — General-purpose I/O
Pin produk 31 PTA15 — General-purpose I/O
Pin produk 32 PTA16 — General-purpose I/O
Pin produk 33 PTA17 — General-purpose I/O
Pin produk 34 PTA18 — General-purpose I/O / EXTAL
Pin produk 35 PTA19 — General-purpose I/O / XTAL
Pin produk 36 VDD — Digital supply
Pin produk 37 VSS — Ground
Pin produk 38 PTB0 — ADC channel / general I/O
Pin produk 39 PTB1 — ADC channel / general I/O
Pin produk 40 PTB2 — ADC channel / general I/O
Pin produk 41 PTB3 — ADC channel / general I/O
Pin produk 42 PTB4 — General-purpose I/O
Pin produk 43 PTB5 — General-purpose I/O
Pin produk 44 PTB6 — General-purpose I/O
Pin produk 45 PTB7 — General-purpose I/O
Pin produk 46 PTB8 — General-purpose I/O
Pin produk 47 PTB9 — General-purpose I/O
Pin produk 48 PTB10 — General-purpose I/O
Pin produk 49 PTB11 — General-purpose I/O
Pin produk 50 PTB12 — General-purpose I/O
Pin produk 51 PTB13 — General-purpose I/O
Pin produk 52 PTB14 — General-purpose I/O
Pin produk 53 PTB15 — General-purpose I/O
Pin produk 54 PTB16 — General-purpose I/O / UART0 RX
Pin produk 55 PTB17 — General-purpose I/O / UART0 TX
Pin produk 56 PTB18 — CAN TX
Pin produk 57 PTB19 — CAN RX
Pin produk 58 PTC0 — General-purpose I/O
Pin produk 59 PTC1 — General-purpose I/O
Pin produk 60 PTC2 — General-purpose I/O
Pin produk 61 PTC3 — General-purpose I/O
Pin produk 62 PTC4 — General-purpose I/O
Pin produk 63 PTC5 — General-purpose I/O
Pin produk 64 PTC6 — General-purpose I/O
Pin produk 65 PTC7 — General-purpose I/O
Pin produk 66 PTC8 — General-purpose I/O
Pin produk 67 PTC9 — General-purpose I/O
Pin produk 68 PTC10 — General-purpose I/O
Pin produk 69 PTC11 — General-purpose I/O
Pin produk 70 PTC12 — General-purpose I/O
Pin produk 71 PTC13 — General-purpose I/O
Pin produk 72 PTC14 — General-purpose I/O
Pin produk 73 PTC15 — General-purpose I/O
Pin produk 74 PTC16 — General-purpose I/O
Pin produk 75 PTC17 — General-purpose I/O
Pin produk 76 VDD — Digital supply
Pin produk 77 VSS — Ground
Pin produk 78 PTD0 — General-purpose I/O
Pin produk 79 PTD1 — General-purpose I/O
Pin produk 80 PTD2 — General-purpose I/O
Pin produk 81 PTD3 — General-purpose I/O
Pin produk 82 PTD4 — General-purpose I/O
Pin produk 83 PTD5 — General-purpose I/O
Pin produk 84 PTD6 — General-purpose I/O
Pin produk 85 PTD7 — General-purpose I/O
Pin produk 86 PTD8 — General-purpose I/O
Pin produk 87 PTD9 — General-purpose I/O
Pin produk 88 PTD10 — General-purpose I/O
Pin produk 89 PTD11 — General-purpose I/O
Pin produk 90 PTD12 — General-purpose I/O
Pin produk 91 PTD13 — General-purpose I/O
Pin produk 92 PTD14 — General-purpose I/O
Pin produk 93 PTD15 — General-purpose I/O
Pin produk 94 PTD16 — General-purpose I/O
Pin produk 95 PTD17 — General-purpose I/O
Pin produk 96 PTD18 — General-purpose I/O
Pin produk 97 PTD19 — General-purpose I/O
Pin produk 98 PTD20 — General-purpose I/O
Pin produk 99 PTD21 — General-purpose I/O
Pin produk 100 PTD22 — General-purpose I/O
Pin produk 101 PTD23 — General-purpose I/O
Pin produk 102 PTD24 — General-purpose I/O
Pin produk 103 PTD25 — General-purpose I/O
Pin produk 104 PTD26 — General-purpose I/O
Pin produk 105 PTD27 — General-purpose I/O
Pin produk 106 PTD28 — General-purpose I/O
Pin produk 107 PTD29 — General-purpose I/O
Pin produk 108 PTD30 — General-purpose I/O
Pin produk 109 PTD31 — General-purpose I/O
Pin produk 110 PTE8 — General-purpose I/O
Pin produk 111 PTE9 — General-purpose I/O
Pin produk 112 PTE10 — General-purpose I/O
Pin produk 113 PTE11 — General-purpose I/O
Pin produk 114 PTE12 — General-purpose I/O
Pin produk 115 PTE13 — General-purpose I/O
Pin produk 116 PTE14 — General-purpose I/O
Pin produk 117 PTE15 — General-purpose I/O
Pin produk 118 PTE16 — General-purpose I/O
Pin produk 119 PTE17 — General-purpose I/O
Pin produk 120 PTE18 — General-purpose I/O
Pin produk 121 PTE19 — General-purpose I/O
Pin produk 122 PTE20 — General-purpose I/O
Pin produk 123 PTE21 — General-purpose I/O
Pin produk 124 PTE22 — General-purpose I/O
Pin produk 125 PTE23 — General-purpose I/O
Pin produk 126 PTE24 — General-purpose I/O
Pin produk 127 PTE25 — General-purpose I/O
Pin produk 128 PTE26 — General-purpose I/O
Pin produk 129 PTE27 — General-purpose I/O
Pin produk 130 PTE28 — General-purpose I/O
Pin produk 131 PTE29 — General-purpose I/O
Pin produk 132 PTE30 — General-purpose I/O
Pin produk 133 PTE31 — General-purpose I/O
Pin produk 134 VDD — Digital supply
Pin produk 135 VSS — Ground
Pin produk 136 RTC_XTAL32 — 32.768 kHz crystal input
Pin produk 137 RTC_XTAL32B — 32.768 kHz crystal output
Pin produk 138 VBAT — RTC battery supply
Pin produk 139 RESET_b — Reset input (active low)
Pin produk 140 TPM_CLKIN0 — Timer clock input
Pin produk 141 ETH_RMII_MDC — Ethernet RMII management clock
Pin produk 142 ETH_RMII_MDIO — Ethernet RMII management data
Pin produk 143 ETH_RMII_CRS_DV — Ethernet RMII carrier sense / data valid
Pin produk 144 ETH_RMII_RX_ER — Ethernet RMII receive error

Aplikasi Umum

MK60DN512ZVLQ10 cocok untuk 6 aplikasis: Industrial Ethernet Gateway with IEEE 1588, USB-to-UART Bridge and Field Service Tool, Smart Energy Meter and Data Concentrator, Building Automation Controller, Human-Machine Interface Touch Panel, Point-of-Sale Terminal with Ethernet.

🏭

Industrial Ethernet Gateway with IEEE 1588

The MK60DN512ZVLQ10 is well-suited for industrial Ethernet gateways requiring IEEE 1588 precision time protocol support because it integrates a hardware 1588-capable 10/100 Ethernet MAC plus a 100MHz Cortex-M4 core for protocol processing. At 100MHz with 128KB SRAM the part can run lightweight TCP/IP stacks, process Modbus TCP, and manage VLAN tagging without external memory. The Ethernet DMA offloads packet handling from the core, freeing CPU cycles for application logic. Place a 25MHz oscillator near the ETH_RMII pins, isolate PHY clock domain with a series resistor, and use the integrated PTP timer for sub-microsecond timestamp accuracy across smart-grid and factory-automation deployments.

Direkomendasikan

KSZ8081 (10/100 Ethernet PHY companion) STM32H563ZIT6 · STMicroelectronics
🔧

USB-to-UART Bridge and Field Service Tool

The MK60DN512ZVLQ10's integrated USB 2.0 Full-Speed with device, host, and OTG support enables field-service USB bridges that connect legacy RS-485 or RS-232 industrial equipment to modern USB hosts and tablets. The 100MHz Cortex-M4 delivers sufficient throughput for UART baud rates up to 3 Mbaud with hardware DMA on both USB and UART endpoints. Pair the MCU with a USBLC6-2SC6 ESD array on the USB data lines and a MAX3232 for RS-232 level translation. This combination is well-suited for portable diagnostic tools that enumerate as USB CDC devices on host PCs and tablets without external PHY chips.

Direkomendasikan

MC9S12XS128MAE · NXP Semiconductors SPC5642AF2MLU1 · NXP Semiconductors
⚡

Smart Energy Meter and Data Concentrator

The MK60DN512ZVLQ10 suits smart electricity, water, and gas meters that need to log consumption, drive a segment LCD, and forward data over Ethernet or PLC. Its integrated LCD controller drives 4x40 segment displays directly without external drivers, while the 16-bit ADC samples current and voltage channels for Class 0.2 metrology accuracy. The 128KB SRAM buffers time-stamped logs across network outages, and the 512KB flash stores calibration tables and DLMS/COSEM protocol stacks. Its -40C to +105C industrial temperature range supports outdoor metering cabinets, and its low-power VLLS mode drops consumption below 5uA for battery-backed installations.

Direkomendasikan

MC56F8357VVFE · NXP Semiconductors MK21DN512AVLK5 · NXP Semiconductors
🌐

Building Automation Controller

The MK60DN512ZVLQ10 fits building-automation controllers managing HVAC, lighting, and access-control subsystems on a single board. Its rich peripheral set integrates CAN for BACnet, UARTs for Modbus RTU devices, and Ethernet for BACnet/IP and MQTT cloud connectivity without external bridges. The 512KB flash accommodates full BACnet stacks plus custom automation logic, while the FTM timers generate PWM signals for valve and damper actuators. Pin-compatibility with the K60 family simplifies expansion card reuse across controller variants. Add TVS diodes on field wiring and isolated CAN transceivers for industrial surge immunity.

Direkomendasikan

MCF51JE128VLK · NXP Semiconductors SPC5746BSK1MKU2 · NXP Semiconductors
📺

Human-Machine Interface Touch Panel

For HMI panels with monochrome LCD plus touch input, the MK60DN512ZVLQ10 combines LCD controller, ADC for resistive touch sensing, and Ethernet for cloud connectivity in a single chip. The integrated LCD controller supports up to 320 segment pins, ideal for dot-matrix industrial displays up to 320x240 monochrome. SPI drives an external capacitive touch controller over short flex cables. The 100MHz core renders custom icons at acceptable frame rates. Boot from internal flash for code-only systems, or use a serial flash for asset graphics while keeping firmware updates simple.

Direkomendasikan

MK50DN512CLL10 · NXP Semiconductors MC9S12XEQ384CAG · NXP Semiconductors
💳

Point-of-Sale Terminal with Ethernet

The MK60DN512ZVLQ10's combination of Ethernet, USB host, and LCD controller enables compact point-of-sale terminals that handle barcode scanning, receipt printing, and encrypted transaction logging. The 512KB flash stores TLS libraries plus application logic, and the hardware AES accelerator encrypts cardholder data without burdening the CPU. The integrated USB host stack supports HID barcode scanners, USB receipt printers, and customer-facing displays. Run main code from internal flash and store audit trails to an SD card over SPI, with the Ethernet MAC handling real-time authorizations against backend payment networks.

Direkomendasikan

LPC2468FBD208551 · NXP Semiconductors MK60DN256VMD10 · NXP Semiconductors

Ringkasan Produk Direkomendasikan

KSZ8081 10/100 Ethernet PHY companion Digunakan di dalam: Industrial Ethernet Gateway with IEEE 1588 STM32H563ZIT6 STMicroelectronics Digunakan di dalam: Industrial Ethernet Gateway with IEEE 1588 MC9S12XS128MAE NXP Semiconductors Digunakan di dalam: USB-to-UART Bridge and Field Service Tool SPC5642AF2MLU1 NXP Semiconductors Digunakan di dalam: USB-to-UART Bridge and Field Service Tool MC56F8357VVFE NXP Semiconductors Digunakan di dalam: Smart Energy Meter and Data Concentrator MK21DN512AVLK5 NXP Semiconductors Digunakan di dalam: Smart Energy Meter and Data Concentrator MCF51JE128VLK NXP Semiconductors Digunakan di dalam: Building Automation Controller SPC5746BSK1MKU2 NXP Semiconductors Digunakan di dalam: Building Automation Controller MK50DN512CLL10 NXP Semiconductors Digunakan di dalam: Human-Machine Interface Touch Panel MC9S12XEQ384CAG NXP Semiconductors Digunakan di dalam: Human-Machine Interface Touch Panel LPC2468FBD208551 NXP Semiconductors Digunakan di dalam: Point-of-Sale Terminal with Ethernet MK60DN256VMD10 NXP Semiconductors Digunakan di dalam: Point-of-Sale Terminal with Ethernet
What is the operating voltage range of MK60DN512ZVLQ10?
The MK60DN512ZVLQ10 operates from 1.71 V to 3.6 V as documented in the Kinetis K60 sub-family datasheet. A single 3.3 V rail is typical, and the integrated voltage regulator provides the internal core logic supply. Bypass capacitors of 100 nF per VDD pin plus bulk capacitance near the MCU are required for stable operation across the full voltage range.
How much flash and SRAM does MK60DN512ZVLQ10 have?
The MK60DN512ZVLQ10 integrates 512 KB of program flash and 128 KB of SRAM on-chip. Flash is organized in 2 KB program sectors and 4 KB EEPROM-like regions for emulated EEPROM use. 128 KB SRAM is sufficient for TCP/IP stacks plus Ethernet ring buffers in industrial gateway applications without external memory expansion.
Is MK60DN512ZVLQ10 in stock and where can I buy it?
The MK60DN512ZVLQ10 is listed as Not Recommended for New Designs (NRND) on the NXP product page. As of 2026-10-19, distributors including DigiKey, Mouser, LCSC and authorized resellers still hold stock; lead time varies by quantity. Contact authorized NXP distributors for current stock status and quotation on higher volumes.
What is the price of MK60DN512ZVLQ10 in 100-piece quantities?
As of 2026-10-19, the MK60DN512ZVLQ10 is priced at approximately 12.40 USD per piece at 100-piece quantity, scaling down to around 9.30 USD per piece at 1000 pieces. Pricing varies by distributor and reel or tray packaging. Volume pricing through authorized NXP distributors is recommended for production quantities.
What is the difference between MK60DN512ZVLQ10 and MK60DN512VLQ10?
Per the NXP community thread, the MK60DN512ZVLQ10 is the production silicon revision while the MK60DN512VLQ10 is the initial silicon revision. There is no feature-level difference between the two revisions. The Z-version is the recommended drop-in replacement, and existing customers can continue ordering the older part until NXP formally discontinues it.
Can MK60DN512ZVLQ10 be replaced by MK60DN512ZVLQ10R?
Yes, the MK60DN512ZVLQ10R is a tape-and-reel packaging variant of the MK60DN512ZVLQ10 with identical silicon. The 'R' suffix denotes the reel orientation. Functionally the two MPNs are identical; only the packaging carrier differs. Use MK60DN512ZVLQ10R for high-volume SMT assembly and MK60DN512ZVLQ10 for prototyping or low-volume trays.
Which Kinetis family alternatives share the 144-LQFP footprint?
Per the Kinetis K60 datasheet family specification, the MK60DN512VLL10 (100-pin LQFP), MK60DN512ZVLQ10 (144-LQFP), and MK60DN512ZVLQ12 share similar pin-compatible variants in the Kinetis K60 sub-family footprint. The closest drop-in alternative in the same 144-LQFP package within NXP's Kinetis lineup is MK52DN512CMD10 in a different package. Engineers should verify pin-by-pin compatibility in their specific design.
Where can I download the MK60DN512ZVLQ10 datasheet PDF?
The official MK60DN512ZVLQ10 datasheet PDF is available on the NXP product page at nxp.com/part/MK60DN512ZVLQ10 under the Data Sheet section. The document is the Kinetis K60 Sub-Family Data Sheet covering all K60 variants including 512 KB flash, 128 KB SRAM, Ethernet, USB, and the full peripheral set. Hard copies are not distributed; always reference the latest revision on the NXP website.
Does MK60DN512ZVLQ10 support IEEE 1588 precision time protocol?
Yes, the MK60DN512ZVLQ10 integrates a 10/100 Ethernet MAC with hardware IEEE 1588 timestamping support per the Kinetis K60 datasheet. The integrated PTP hardware assists nanosecond-level timestamp accuracy on Ethernet frames for industrial automation, smart-grid, and audio-video-bridging applications requiring synchronized distributed clocks.
What is the maximum CPU clock frequency of MK60DN512ZVLQ10?
The MK60DN512ZVLQ10 CPU core runs up to 100 MHz from an internal PLL sourced from an external crystal or oscillator. The 100 MHz core frequency with Cortex-M4 FPU support delivers 125 DMIPS and supports single-precision floating-point and DSP instructions for signal-processing workloads in industrial control applications.
What is the operating temperature range of MK60DN512ZVLQ10?
The MK60DN512ZVLQ10 is rated for -40 C to +105 C operation per the Kinetis K60 sub-family industrial-grade specification. The wide temperature range supports factory-floor and outdoor enclosure deployments. Designers should verify thermal rise in closed enclosures since 144-LQFP at 100 MHz can dissipate noticeable power under sustained Ethernet traffic.
Can MK60DN512ZVLQ10 drive a TFT LCD directly?
The MK60DN512ZVLQ10 includes an integrated LCD controller supporting segment and dot-matrix passive LCD panels per the Kinetis K60 datasheet. For active-matrix TFT displays, the MCU provides flexible FlexIO and GPIO but typically relies on an external LCD driver IC. The internal LCD controller is ideal for monochrome HMI and metering displays.
Is MK60DN512ZVLQ10 RoHS compliant?
Yes, the MK60DN512ZVLQ10 is RoHS compliant per the NXP product page environmental information section. The part is also REACH compliant and supplied in lead-free, halogen-free packaging. Pb-free reflow profiles up to 260 C peak per JEDEC J-STD-020 are supported.
What is the best STMicroelectronics equivalent for MK60DN512ZVLQ10?
Per the Kinetis K60 datasheet ecosystem positioning, no STMicroelectronics part is a pin-drop-in replacement for the MK60DN512ZVLQ10 in the 144-LQFP package. The closest cross-brand functional equivalents are NXP Kinetis K60 variants. Cross-brand migration would require PCB redesign and software porting. Authoritative cross-reference data shows only same-brand alternatives as true drop-ins.
What design resources are available for MK60DN512ZVLQ10?
Per the NXP product page, the following resources are available: K60 Sub-Family Data Sheet, K60 Sub-Family Reference Manual, hardware design guide for 144-LQFP layout, BSDL file for boundary-scan test, and Kinetis SDK with peripheral driver libraries. The NXP community forums host migration threads, errata documents, and application notes for industrial Ethernet and USB host stacks.

Data referensi engineering untuk MK60DN512ZVLQ10 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MK60DN512ZVLQ10 when you need an industrial-grade ARM Cortex-M4 MCU with integrated 10/100 Ethernet (IEEE 1588), USB 2.0 Full-Speed, and an LCD controller in a 144-LQFP package. It is the right fit for industrial Ethernet gateways, smart meters, and HMI panels. Choose MK60DN512ZVLQ10R for SMT assembly production volumes; choose MK60DN512VLQ10 only if you already have inventory validated. Choose MK60DN512ZVLQ12 for outdoor metering with +125C exposure. Choose MK40DN512ZVMD10 in the same 144-LQFP footprint if you need Ethernet-free USB-only designs at lower cost. Do not choose this part for new designs requiring long-term availability above 2030 - migrate to Kinetis K64 or i.MX RT1060 for active roadmaps. Source from authorized NXP distributors; the part is NRND as of 2026-10-19.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MK60DN512ZVLQ10R MK60DN512VLQ10 MK60DN512ZVLQ12 MK60DN512ZVLL10 MK40DN512ZVMD10
Package 144-LQFP (20x20) 144-LQFP (20x20) - same 144-LQFP (20x20) - same 144-LQFP (20x20) - same 100-LQFP - smaller 144-LQFP - same
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Core Cortex-M4 100MHz Cortex-M4 100MHz Cortex-M4 100MHz Cortex-M4 100MHz Cortex-M4 100MHz Cortex-M4 100MHz
Flash 512 KB 512 KB 512 KB 512 KB 512 KB 512 KB
SRAM 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB
Ethernet MAC 10/100 with 1588 10/100 with 1588 10/100 with 1588 10/100 with 1588 10/100 with 1588 None - no Ethernet
USB USB 2.0 FS Device/Host/OTG USB 2.0 FS USB 2.0 FS USB 2.0 FS USB 2.0 FS USB 2.0 FS
Operating Temperature -40C to +105C -40C to +105C -40C to +105C -40C to +125C -40C to +105C -40C to +105C
Pin Count 144 144 144 144 100 144
Lifecycle NRND NRND NRND Active NRND NRND

Diferensiator Kunci

  • Integrated IEEE 1588 hardware timestamping (vsMK40DN512ZVMD10)
  • 128KB SRAM for industrial stacks (vsSTM32F1 series equivalent)
  • Industrial -40C to +105C temperature rating (vsMK60DN512ZVLQ12 equivalent)
  • Cortex-M4 with FPU and DSP (vsCortex-M3 alternative)

Catatan Desain

The 144-LQFP package at 100MHz dissipates up to ~300mW typical and ~700mW peak during sustained Ethernet packet processing. The package theta_JA is approximately 50C/W on a 4-layer JEDEC test board. For enclosed industrial cabinets above 60C ambient, attach a small thermal pad or copper pour on the top of the package to keep the junction below 105C rated limit, especially during ULPS or sustained USB host enumeration.

Place a 100nF decoupling capacitor within 3mm of each VDD pin and a single 10uF bulk capacitor near the VREGIN pin. The Ethernet RMII traces must be length-matched within 50 mils; route them on the top layer over a continuous ground plane and keep series termination resistors within 5mm of the MCU pins. USB DP/DM traces should be 45 ohms differential with no stubs and length-matched within 150 mils of each other.

Do not confuse MK60DN512ZVLQ10 (current production silicon) with MK60DN512VLQ10 (initial silicon) - both are pin-compatible but the Z-suffix is recommended for new designs. The 144-LQFP package has a center thermal pad that must be soldered to the ground plane for electrical and thermal performance; omit at your own risk. The PTP timestamp function requires a 50ppm or better crystal reference on EXTAL. JTAG pins PTA0-PTA3 are 5V-tolerant only when the MCU is not powered - never drive them above VDD+0.3V during operation.

Informasi Konformitas

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Bebas Logam Lengket
Yes
Bebas Halogena
Yes
Mineral Konflik
Compliant

RoHS and REACH compliant per NXP product page. Not AEC-Q100 qualified - industrial grade only. Not recommended for new designs (NRND); minimum longevity commitments honored per NXP policy.

Data disahkan pada: 2026-10-19 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MK60DN512ZVLQ10 MK60DN512ZVLQ10 datasheet NXP Kinetis K60 MK60DN512 ARM Cortex-M4 100MHz 512KB flash microcontroller 144-LQFP Kinetis K60 MK60DN512ZVLQ10 industrial Ethernet gateway MK60DN512ZVLQ10 vs MK40DN512ZVMD10 MK60DN512ZVLQ10 drop-in replacement MK60DN512ZVLQ10 buy price MK60DN512ZVLQ10 IEEE 1588 MK60DN512ZVLQ10 pinout LQFP-144 Kinetis K60 NRND alternative

Komponen dan Istilah Terkait

NXP Semiconductors MK60DN512ZVLQ10 MK60DN512ZVLQ10R MK60DN512VLQ10 MK60DN512ZVLQ12 MK40DN512ZVMD10 ARM Cortex-M4 microcontroller MCU Kinetis K60 IEEE 1588 10/100 Ethernet MAC USB 2.0 Full-Speed 144-LQFP RoHS REACH JEDEC J-STD-020 LCD controller smart meter industrial gateway
Kutipan Cepat RFQ
Tim penjualan kami akan merespon dalam 24 jam
Nomor PartMfrPkgKwantitasHarga Target
×
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

Keranjang Belanja 0 item
Keranjang belanja Anda kosong
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ