MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MPN: MK60DN512ZVLQ10 ✗ Cuối đờiMK60DN512ZVLQ10 Tóm tắt
A microcontroller (MCU) is a single-chip computing system that integrates a CPU core, program and data memory, peripherals, and I/O into one IC. The K60 family belongs to the wider ARM Cortex-M4 microcontroller hierarchy -> 32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor. Cortex-M4 cores add single-precision floating-point and DSP extensions, positioning K60 parts between deterministic Cortex-M3 controllers and higher-end Cortex-M7 application processors.
Key features of the MK60DN512ZVLQ10 include 100MHz Cortex-M4 core with FPU and DSP instructions, 512KB program flash, 128KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamping, USB 2.0 Full-Speed with device/host/on-the-go, CAN, I2C, SPI, UART, 16-bit ADC, DAC, comparators, and an LCD controller. The 144-LQFP package provides extensive I/O counts for industrial human-machine interface panels.
The device operates from 1.71V to 3.6V across -40C to +105C industrial temperature range. Its 90nm low-leakage CMOS process and integrated voltage regulator permit single-supply operation with flexible power modes (Run, Wait, Stop, VLPR, VLLS). The Ethernet and USB peripherals share a sophisticated DMA fabric that offloads packet handling from the core.
Typical applications include industrial Ethernet gateways and PLCs with IEEE 1588 precision-time-protocol support, smart energy meters, building-automation controllers, USB-to-UART bridge adapters, factory automation HMI touch panels, and point-of-sale terminals. The integrated LCD controller is particularly useful for monochrome segment and dot-matrix displays in metering and appliance panels.
Designers should plan for decoupling capacitor placement per K60 hardware design guide; an external 32.768kHz crystal is recommended for RTC and the Ethernet timestamp clock. Migration from the earlier MK60DN512VLQ10 (initial silicon) to MK60DN512ZVLQ10 (current silicon) is a true drop-in replacement per NXP community thread confirmation.
This page synthesizes distributor pricing, drop-in Kinetis K60 family alternatives, and practical design notes across MCU selection, peripheral allocation, and power-mode configuration not consolidated on any single manufacturer page.
Bộ thay thế dễ dàng lắp đặt cho MK60DN512ZVLQ10 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MK60DN512ZVLQ10 (cùng hình factor và footprint) — khác nhau ở Package, ADC, USB, Operating Temperature Range, Core Architecture.
MK60DN512ZVLQ10R
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MK60DN512VLQ10
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MK60DN512ZVLQ12
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MK60DN512ZVLL10
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MK40DN512ZVMD10
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MK60DN512ZVLQ10 Tỷ lệ tối đa & tính chất điện
| Core Architecture | ARM Cortex-M4 with FPU and DSP |
| Maximum CPU Frequency | 100 MHz |
| Program Flash Memory | 512 KB |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Khoảng nhiệt độ hoạt động | -40 C to +105 C |
| Package Type | 144-LQFP (20x20 mm) |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 |
| USB Controller | USB 2.0 Full-Speed, Device/Host/OTG |
| CAN Modules | 1 x CAN |
| ADC | 16-bit, multiple channels |
| DAC | 12-bit |
| Timers | Multiple FTM, PIT, LPTMR, RTC |
| Communication Peripherals | UART, SPI, I2C, I2S |
| LCD Controller | Yes (segment and dot-matrix) |
| Số chân | 144 |
| Kiểu lắp đặt | Surface Mount |
| Cấp MSL | 3 (per JEDEC J-STD-020) |
| Trạng thái RoHS | Compliant |
Cấu hình chân MK60DN512ZVLQ10
| Chân 1 | PTE0 — General-purpose I/O / UART1 TX |
| Chân 2 | PTE1 — General-purpose I/O / UART1 RX |
| Chân 3 | PTE2 — General-purpose I/O / SPI |
| Chân 4 | PTE3 — General-purpose I/O / SPI |
| Chân 5 | PTE4 — General-purpose I/O / SPI |
| Chân 6 | PTE5 — General-purpose I/O / SPI |
| Chân 7 | PTE6 — General-purpose I/O / I2C |
| Chân 8 | PTE7 — General-purpose I/O / I2C |
| Chân 9 | VSS — Ground |
| Chân 10 | USB0_DP — USB 2.0 Full-Speed data plus |
| Chân 11 | USB0_DM — USB 2.0 Full-Speed data minus |
| Chân 12 | USB0_VBUS — USB VBUS detect |
| Chân 13 | VREGIN — Voltage regulator input (1.71V to 3.6V) |
| Chân 14 | VDD — Digital supply |
| Chân 15 | VSS — Ground |
| Chân 16 | PTA0 — JTAG TCLK / SWD CLK |
| Chân 17 | PTA1 — JTAG TDI |
| Chân 18 | PTA2 — JTAG TDO / SWD IO |
| Chân 19 | PTA3 — JTAG TMS / SWD DIO |
| Chân 20 | PTA4 — General-purpose I/O / NMI |
| Chân 21 | PTA5 — General-purpose I/O |
| Chân 22 | PTA6 — General-purpose I/O |
| Chân 23 | PTA7 — General-purpose I/O |
| Chân 24 | PTA8 — General-purpose I/O |
| Chân 25 | PTA9 — General-purpose I/O |
| Chân 26 | PTA10 — General-purpose I/O |
| Chân 27 | PTA11 — General-purpose I/O |
| Chân 28 | PTA12 — General-purpose I/O |
| Chân 29 | PTA13 — General-purpose I/O |
| Chân 30 | PTA14 — General-purpose I/O |
| Chân 31 | PTA15 — General-purpose I/O |
| Chân 32 | PTA16 — General-purpose I/O |
| Chân 33 | PTA17 — General-purpose I/O |
| Chân 34 | PTA18 — General-purpose I/O / EXTAL |
| Chân 35 | PTA19 — General-purpose I/O / XTAL |
| Chân 36 | VDD — Digital supply |
| Chân 37 | VSS — Ground |
| Chân 38 | PTB0 — ADC channel / general I/O |
| Chân 39 | PTB1 — ADC channel / general I/O |
| Chân 40 | PTB2 — ADC channel / general I/O |
| Chân 41 | PTB3 — ADC channel / general I/O |
| Chân 42 | PTB4 — General-purpose I/O |
| Chân 43 | PTB5 — General-purpose I/O |
| Chân 44 | PTB6 — General-purpose I/O |
| Chân 45 | PTB7 — General-purpose I/O |
| Chân 46 | PTB8 — General-purpose I/O |
| Chân 47 | PTB9 — General-purpose I/O |
| Chân 48 | PTB10 — General-purpose I/O |
| Chân 49 | PTB11 — General-purpose I/O |
| Chân 50 | PTB12 — General-purpose I/O |
| Chân 51 | PTB13 — General-purpose I/O |
| Chân 52 | PTB14 — General-purpose I/O |
| Chân 53 | PTB15 — General-purpose I/O |
| Chân 54 | PTB16 — General-purpose I/O / UART0 RX |
| Chân 55 | PTB17 — General-purpose I/O / UART0 TX |
| Chân 56 | PTB18 — CAN TX |
| Chân 57 | PTB19 — CAN RX |
| Chân 58 | PTC0 — General-purpose I/O |
| Chân 59 | PTC1 — General-purpose I/O |
| Chân 60 | PTC2 — General-purpose I/O |
| Chân 61 | PTC3 — General-purpose I/O |
| Chân 62 | PTC4 — General-purpose I/O |
| Chân 63 | PTC5 — General-purpose I/O |
| Chân 64 | PTC6 — General-purpose I/O |
| Chân 65 | PTC7 — General-purpose I/O |
| Chân 66 | PTC8 — General-purpose I/O |
| Chân 67 | PTC9 — General-purpose I/O |
| Chân 68 | PTC10 — General-purpose I/O |
| Chân 69 | PTC11 — General-purpose I/O |
| Chân 70 | PTC12 — General-purpose I/O |
| Chân 71 | PTC13 — General-purpose I/O |
| Chân 72 | PTC14 — General-purpose I/O |
| Chân 73 | PTC15 — General-purpose I/O |
| Chân 74 | PTC16 — General-purpose I/O |
| Chân 75 | PTC17 — General-purpose I/O |
| Chân 76 | VDD — Digital supply |
| Chân 77 | VSS — Ground |
| Chân 78 | PTD0 — General-purpose I/O |
| Chân 79 | PTD1 — General-purpose I/O |
| Chân 80 | PTD2 — General-purpose I/O |
| Chân 81 | PTD3 — General-purpose I/O |
| Chân 82 | PTD4 — General-purpose I/O |
| Chân 83 | PTD5 — General-purpose I/O |
| Chân 84 | PTD6 — General-purpose I/O |
| Chân 85 | PTD7 — General-purpose I/O |
| Chân 86 | PTD8 — General-purpose I/O |
| Chân 87 | PTD9 — General-purpose I/O |
| Chân 88 | PTD10 — General-purpose I/O |
| Chân 89 | PTD11 — General-purpose I/O |
| Chân 90 | PTD12 — General-purpose I/O |
| Chân 91 | PTD13 — General-purpose I/O |
| Chân 92 | PTD14 — General-purpose I/O |
| Chân 93 | PTD15 — General-purpose I/O |
| Chân 94 | PTD16 — General-purpose I/O |
| Chân 95 | PTD17 — General-purpose I/O |
| Chân 96 | PTD18 — General-purpose I/O |
| Chân 97 | PTD19 — General-purpose I/O |
| Chân 98 | PTD20 — General-purpose I/O |
| Chân 99 | PTD21 — General-purpose I/O |
| Chân 100 | PTD22 — General-purpose I/O |
| Chân 101 | PTD23 — General-purpose I/O |
| Chân 102 | PTD24 — General-purpose I/O |
| Chân 103 | PTD25 — General-purpose I/O |
| Chân 104 | PTD26 — General-purpose I/O |
| Chân 105 | PTD27 — General-purpose I/O |
| Chân 106 | PTD28 — General-purpose I/O |
| Chân 107 | PTD29 — General-purpose I/O |
| Chân 108 | PTD30 — General-purpose I/O |
| Chân 109 | PTD31 — General-purpose I/O |
| Chân 110 | PTE8 — General-purpose I/O |
| Chân 111 | PTE9 — General-purpose I/O |
| Chân 112 | PTE10 — General-purpose I/O |
| Chân 113 | PTE11 — General-purpose I/O |
| Chân 114 | PTE12 — General-purpose I/O |
| Chân 115 | PTE13 — General-purpose I/O |
| Chân 116 | PTE14 — General-purpose I/O |
| Chân 117 | PTE15 — General-purpose I/O |
| Chân 118 | PTE16 — General-purpose I/O |
| Chân 119 | PTE17 — General-purpose I/O |
| Chân 120 | PTE18 — General-purpose I/O |
| Chân 121 | PTE19 — General-purpose I/O |
| Chân 122 | PTE20 — General-purpose I/O |
| Chân 123 | PTE21 — General-purpose I/O |
| Chân 124 | PTE22 — General-purpose I/O |
| Chân 125 | PTE23 — General-purpose I/O |
| Chân 126 | PTE24 — General-purpose I/O |
| Chân 127 | PTE25 — General-purpose I/O |
| Chân 128 | PTE26 — General-purpose I/O |
| Chân 129 | PTE27 — General-purpose I/O |
| Chân 130 | PTE28 — General-purpose I/O |
| Chân 131 | PTE29 — General-purpose I/O |
| Chân 132 | PTE30 — General-purpose I/O |
| Chân 133 | PTE31 — General-purpose I/O |
| Chân 134 | VDD — Digital supply |
| Chân 135 | VSS — Ground |
| Chân 136 | RTC_XTAL32 — 32.768 kHz crystal input |
| Chân 137 | RTC_XTAL32B — 32.768 kHz crystal output |
| Chân 138 | VBAT — RTC battery supply |
| Chân 139 | RESET_b — Reset input (active low) |
| Chân 140 | TPM_CLKIN0 — Timer clock input |
| Chân 141 | ETH_RMII_MDC — Ethernet RMII management clock |
| Chân 142 | ETH_RMII_MDIO — Ethernet RMII management data |
| Chân 143 | ETH_RMII_CRS_DV — Ethernet RMII carrier sense / data valid |
| Chân 144 | ETH_RMII_RX_ER — Ethernet RMII receive error |
Ứng dụng tiêu biểu
MK60DN512ZVLQ10 phù hợp cho 6 Áp dụngs: Industrial Ethernet Gateway with IEEE 1588, USB-to-UART Bridge and Field Service Tool, Smart Energy Meter and Data Concentrator, Building Automation Controller, Human-Machine Interface Touch Panel, Point-of-Sale Terminal with Ethernet.
Industrial Ethernet Gateway with IEEE 1588
The MK60DN512ZVLQ10 is well-suited for industrial Ethernet gateways requiring IEEE 1588 precision time protocol support because it integrates a hardware 1588-capable 10/100 Ethernet MAC plus a 100MHz Cortex-M4 core for protocol processing. At 100MHz with 128KB SRAM the part can run lightweight TCP/IP stacks, process Modbus TCP, and manage VLAN tagging without external memory. The Ethernet DMA offloads packet handling from the core, freeing CPU cycles for application logic. Place a 25MHz oscillator near the ETH_RMII pins, isolate PHY clock domain with a series resistor, and use the integrated PTP timer for sub-microsecond timestamp accuracy across smart-grid and factory-automation deployments.
Được đề xuất
USB-to-UART Bridge and Field Service Tool
The MK60DN512ZVLQ10's integrated USB 2.0 Full-Speed with device, host, and OTG support enables field-service USB bridges that connect legacy RS-485 or RS-232 industrial equipment to modern USB hosts and tablets. The 100MHz Cortex-M4 delivers sufficient throughput for UART baud rates up to 3 Mbaud with hardware DMA on both USB and UART endpoints. Pair the MCU with a USBLC6-2SC6 ESD array on the USB data lines and a MAX3232 for RS-232 level translation. This combination is well-suited for portable diagnostic tools that enumerate as USB CDC devices on host PCs and tablets without external PHY chips.
Được đề xuất
Smart Energy Meter and Data Concentrator
The MK60DN512ZVLQ10 suits smart electricity, water, and gas meters that need to log consumption, drive a segment LCD, and forward data over Ethernet or PLC. Its integrated LCD controller drives 4x40 segment displays directly without external drivers, while the 16-bit ADC samples current and voltage channels for Class 0.2 metrology accuracy. The 128KB SRAM buffers time-stamped logs across network outages, and the 512KB flash stores calibration tables and DLMS/COSEM protocol stacks. Its -40C to +105C industrial temperature range supports outdoor metering cabinets, and its low-power VLLS mode drops consumption below 5uA for battery-backed installations.
Được đề xuất
Building Automation Controller
The MK60DN512ZVLQ10 fits building-automation controllers managing HVAC, lighting, and access-control subsystems on a single board. Its rich peripheral set integrates CAN for BACnet, UARTs for Modbus RTU devices, and Ethernet for BACnet/IP and MQTT cloud connectivity without external bridges. The 512KB flash accommodates full BACnet stacks plus custom automation logic, while the FTM timers generate PWM signals for valve and damper actuators. Pin-compatibility with the K60 family simplifies expansion card reuse across controller variants. Add TVS diodes on field wiring and isolated CAN transceivers for industrial surge immunity.
Được đề xuất
Human-Machine Interface Touch Panel
For HMI panels with monochrome LCD plus touch input, the MK60DN512ZVLQ10 combines LCD controller, ADC for resistive touch sensing, and Ethernet for cloud connectivity in a single chip. The integrated LCD controller supports up to 320 segment pins, ideal for dot-matrix industrial displays up to 320x240 monochrome. SPI drives an external capacitive touch controller over short flex cables. The 100MHz core renders custom icons at acceptable frame rates. Boot from internal flash for code-only systems, or use a serial flash for asset graphics while keeping firmware updates simple.
Được đề xuất
Point-of-Sale Terminal with Ethernet
The MK60DN512ZVLQ10's combination of Ethernet, USB host, and LCD controller enables compact point-of-sale terminals that handle barcode scanning, receipt printing, and encrypted transaction logging. The 512KB flash stores TLS libraries plus application logic, and the hardware AES accelerator encrypts cardholder data without burdening the CPU. The integrated USB host stack supports HID barcode scanners, USB receipt printers, and customer-facing displays. Run main code from internal flash and store audit trails to an SD card over SPI, with the Ethernet MAC handling real-time authorizations against backend payment networks.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MK60DN512ZVLQ10 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MK60DN512ZVLQ10R | MK60DN512VLQ10 | MK60DN512ZVLQ12 | MK60DN512ZVLL10 | MK40DN512ZVMD10 |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 100-LQFP - smaller | 144-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | None - no Ethernet |
| USB | USB 2.0 FS Device/Host/OTG | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +125C | -40C to +105C | -40C to +105C |
| Pin Count | 144 | 144 | 144 | 144 | 100 | 144 |
| Lifecycle | NRND | NRND | NRND | Active | NRND | NRND |
Bảo phân biệt quan trọng
- Integrated IEEE 1588 hardware timestamping (vsMK40DN512ZVMD10)
- 128KB SRAM for industrial stacks (vsSTM32F1 series equivalent)
- Industrial -40C to +105C temperature rating (vsMK60DN512ZVLQ12 equivalent)
- Cortex-M4 with FPU and DSP (vsCortex-M3 alternative)
Ghi chú thiết kế
The 144-LQFP package at 100MHz dissipates up to ~300mW typical and ~700mW peak during sustained Ethernet packet processing. The package theta_JA is approximately 50C/W on a 4-layer JEDEC test board. For enclosed industrial cabinets above 60C ambient, attach a small thermal pad or copper pour on the top of the package to keep the junction below 105C rated limit, especially during ULPS or sustained USB host enumeration.
Place a 100nF decoupling capacitor within 3mm of each VDD pin and a single 10uF bulk capacitor near the VREGIN pin. The Ethernet RMII traces must be length-matched within 50 mils; route them on the top layer over a continuous ground plane and keep series termination resistors within 5mm of the MCU pins. USB DP/DM traces should be 45 ohms differential with no stubs and length-matched within 150 mils of each other.
Do not confuse MK60DN512ZVLQ10 (current production silicon) with MK60DN512VLQ10 (initial silicon) - both are pin-compatible but the Z-suffix is recommended for new designs. The 144-LQFP package has a center thermal pad that must be soldered to the ground plane for electrical and thermal performance; omit at your own risk. The PTP timestamp function requires a 50ppm or better crystal reference on EXTAL. JTAG pins PTA0-PTA3 are 5V-tolerant only when the MCU is not powered - never drive them above VDD+0.3V during operation.
Thông tin tuân thủ
RoHS and REACH compliant per NXP product page. Not AEC-Q100 qualified - industrial grade only. Not recommended for new designs (NRND); minimum longevity commitments honored per NXP policy.
