SN65HVD08D vs SN65HVD77D 比較

詳細な並列比較: SN65HVD08D メーカー: Texas Instruments および SN65HVD77D メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
SN65HVD08D SN65HVD08D - 3.3/5V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD08D - 3.3/5V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD08D ✓ 生産中
Texas Instruments
SN65HVD77D SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D ✓ 生産中

仕様比較

パラメータ SN65HVD08D SN65HVD77D
ブランド Texas Instruments Texas Instruments
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Product Type Half-duplex RS-485 transceiver Full-duplex RS-485 transceiver
電源電圧 3.3/5 V —
Maximum Supply Voltage 5.5 V —
Maximum Data Rate 10 Mbps 50 Mbps
Quiescent Power Consumption Less than 90 mW —
Receiver Unit Load 1/8 unit load —
Maximum Bus Nodes Up to 256 nodes —
Bus-Pin ESD Protection Exceeds 16 kV HBM —
Driver Output Type Three-state differential line driver Differential
Receiver Type Differential line receiver —
Failsafe Receiver Behavior Open-circuit, short-circuit, and idle-bus failsafe —
Standards Compatibility ANSI TIA/EIA-485-A and ISO-8482E —
Cable-Powered Operation 5-V power bus with up to 2 V line-voltage drop —
パッケージ 8-pin SOIC 8-pin SOIC (D)
実装タイプ Surface mount Surface mount
動作温度範囲 [DATA_NEEDED: operating temperature range] -40°C to 125°C
RoHS ステータス [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Supply Voltage Range — 3.0 V to 3.6 V
Nominal Supply Voltage — 3.3 V
Number of Drivers — 1
Number of Receivers — 1
Duplex Mode — Full duplex
Supported Standards — RS-485 and RS-422
ESD Protection — ±12 kV IEC
Package Width — 3.90 mm
External Enable Controls — None
Receiver Output Type — Single-ended logic output
Low-Power Standby Current — Less than 5 µA when driver and receiver are disabled
Termination Requirement — External termination required

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼