SN65HVD08D vs SN65HVD77D 比較

詳細並排比較 SN65HVD08D 由 Texas Instruments 與 SN65HVD77D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
SN65HVD08D SN65HVD08D - 3.3/5V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD08D - 3.3/5V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD08D ✓ 啟用中
Texas Instruments
SN65HVD77D SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D ✓ 啟用中

規格比較

參數 SN65HVD08D SN65HVD77D
品牌 Texas Instruments Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Half-duplex RS-485 transceiver Full-duplex RS-485 transceiver
供應電壓 3.3/5 V —
Maximum Supply Voltage 5.5 V —
Maximum Data Rate 10 Mbps 50 Mbps
Quiescent Power Consumption Less than 90 mW —
Receiver Unit Load 1/8 unit load —
Maximum Bus Nodes Up to 256 nodes —
Bus-Pin ESD Protection Exceeds 16 kV HBM —
Driver Output Type Three-state differential line driver Differential
Receiver Type Differential line receiver —
Failsafe Receiver Behavior Open-circuit, short-circuit, and idle-bus failsafe —
Standards Compatibility ANSI TIA/EIA-485-A and ISO-8482E —
Cable-Powered Operation 5-V power bus with up to 2 V line-voltage drop —
封裝 8-pin SOIC 8-pin SOIC (D)
安裝類型 Surface mount Surface mount
工作溫度範圍 [DATA_NEEDED: operating temperature range] -40°C to 125°C
RoHS 狀態 [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Supply Voltage Range — 3.0 V to 3.6 V
Nominal Supply Voltage — 3.3 V
Number of Drivers — 1
Number of Receivers — 1
Duplex Mode — Full duplex
Supported Standards — RS-485 and RS-422
ESD Protection — ±12 kV IEC
Package Width — 3.90 mm
External Enable Controls — None
Receiver Output Type — Single-ended logic output
Low-Power Standby Current — Less than 5 µA when driver and receiver are disabled
Termination Requirement — External termination required

資料表與資源

瀏覽所有產品 建立 BOM 索取報價