10M16DCF256A7G - MAX 10 FPGA, 16K LE, 178 I/O, 256-FBGA | Intel
部品番号: 10M16DCF256A7G ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $54.39 | $54.39 |
| 10 | $49.2 | $492.00 |
| 100 | $44.1 | $4,410.00 |
| 500 | $40.05 | $20,025.00 |
| 1,000 | $37.2 | $37,200.00 |
10M16DCF256A7G 概要
A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells, allowing engineers to implement custom digital logic after PCB fabrication. Within the broader taxonomy, the MAX 10 sits at the junction of programmable logic devices (PLD) and system-on-chip (SoC) integration, offering non-volatile configuration, on-chip flash, ADC blocks, and DSP support - bridging entry-level CPLDs and high-performance SoC FPGAs like Cyclone V or Stratix 10.
Key features include 16K logic elements (LE), 504 Kbit (Kb) embedded SRAM, 1.0 Mb user flash memory, dedicated 18 x 18 multipliers for DSP, and integrated ADCs. The 256-FBGA package exposes 178 maximum user I/Os, supporting LVDS, LVCMOS, SSTL, and other single-ended/differential I/O standards. A dual-boot configuration scheme enables fail-safe field upgrades, while on-chip flash storage removes the need for external boot PROMs in most designs.
MAX 10 devices use a look-up-table (LUT) based logic fabric with 8-input fracturable LUTs, embedded memory blocks (M9K/M144K), and DSP blocks optimized for fixed- and floating-point math. The hard PCIe Gen2 IP block and hard memory controllers simplify interface implementation. Integrated ADCs (12-bit, up to 1 MSPS) enable sensor fusion and system monitoring without an external analog front end.
Typical applications include industrial motor control, factory automation, video bridging and display controllers, low-power portable instrumentation, automotive infotainment subsystems, and IoT edge nodes requiring deterministic logic plus on-chip flash. Designers select MAX 10 when they need instant-on non-volatile configuration without external boot memory.
When laying out a board, allocate four dedicated GND planes around the BGA, route length-matched pairs for LVDS, and follow Intel's pin connection guidelines for unused pins. Decoupling requires 100 nF X7R near every VCCIO/VCCINT ball group with bulk 10 uF and 47 uF tantalum/polymer caps on each supply rail.
This page synthesizes distributor pricing, verified drop-in alternatives, and practical PCB design notes not consolidated in the original manufacturer datasheet - giving engineers an actionable engineering reference for sourcing and second-sourcing the 10M16DCF256A7G.
ドロップイン代替品: 10M16DCF256A7G — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 10M16DCF256A7G （同一形状・フットプリント） — 相違点: Package, Logic Elements (LE), Operating Temperature, Speed Grade, Configuration.
クイック比較ツール — 並列比較する代替部品を選択:
10M16DAF256C7G
✅ ドロップイン✓ 在庫あり
$13.8 / 個
データシートを見る →10M16DAF256A7G
✅ ドロップイン📋 参考代替品（カタログ未掲載）
10M16DAF256C8G
✅ ドロップイン📋 参考代替品（カタログ未掲載）
10M04DCF256A7G
✅ ドロップイン✓ 在庫あり
$11.1 / 個
データシートを見る →10M08DCF256A7G
✅ ドロップイン✓ 在庫あり
$15.2 / 個
データシートを見る →10M08DAF256C7G
✅ ドロップイン✓ 在庫あり
$7.95 / 個
データシートを見る →10M16DCF256A7G 最大定格＆電気的特性
| Family | MAX 10 |
| Logic Elements | 16,000 |
| Embedded Memory | 562,176 bits (70 KB) |
| Maximum User I/O | 178 |
| Process Technology | 55 nm |
| Core Voltage | 1.2 V |
| Maximum Internal Frequency | 472.5 MHz |
| パッケージ | 256-LBGA (FBGA) |
| 実装タイプ | Surface Mount |
| Operating Temperature Grade | Industrial |
| User Flash Memory | 1.0 Mb |
| Configuration Scheme | Dual-boot on-chip flash |
| RoHS ステータス | Compliant |
10M16DCF256A7G 256-lbga (fbga) ピン配置ガイド
10M16DCF256A7G (256-lbga (fbga) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: 10M16DCF256A7G.
詳細は データシート をご参照ください。
主な用途
10M16DCF256A7G の用途: 6 件s: Industrial Motor Control, Factory Automation Controllers, Video Bridging and Display Controllers, Low-Power Portable Instrumentation, Automotive Infotainment Subsystems, IoT Edge Sensor Nodes.
Industrial Motor Control
The 10M16DCF256A7G is well suited for industrial motor control, where its 16,000 logic elements implement three-phase PWM generators, FOC algorithms, and encoder decoding simultaneously. The integrated 12-bit ADC samples phase currents at up to 1 MSPS, removing the need for an external analog front end, while the 256-FBGA package exposes 178 user I/Os to drive gate drivers and read Hall or quadrature feedback. Unlike pure DSP FPGAs, MAX 10 adds on-chip flash for instant-on configuration - critical for safety-critical motor restart scenarios. The 472.5 MHz fMAX enables sub-microsecond control loop periods when running field-oriented control at 20 kHz PWM.
おすすめ
Factory Automation Controllers
Factory automation PLCs and remote I/O modules leverage the 10M16DCF256A7G's combination of non-volatile configuration, integrated ADC, and abundant I/O. The 1.0 Mb user flash stores configuration and runtime parameters without external EEPROM, while 178 I/Os handle digital sensor aggregation, isolated relay drives, and serial fieldbuses. Industrial temperature grade (-40C to +100C) and RoHS compliance suit 24/7 control cabinet environments. The MAX 10's deterministic dual-boot flash ensures fail-safe firmware updates - if a new image fails CRC, the golden image boots instead, eliminating field bricking.
おすすめ
Video Bridging and Display Controllers
The 10M16DCF256A7G can implement video format converters, scalers, and bridging ICs for industrial displays and digital signage. Its 16K LEs and embedded multipliers process pixel data at typical display rates (up to 1080p60), while the 178 I/Os support parallel RGB, LVDS, and MIPI-style interfaces via soft IP. The 562 Kbit embedded RAM buffers scan-line data efficiently, and instant-on from flash eliminates boot splash delays compared with SRAM-based FPGAs that require external boot PROMs. Designers targeting multi-display controllers can stack two MAX 10 devices for higher bandwidth.
おすすめ
Low-Power Portable Instrumentation
Handheld test equipment, portable medical devices, and battery-powered measurement tools benefit from the 10M16DCF256A7G's low static power and on-chip flash. The MAX 10 family's low-power 'DA' speed grades operate below 100 mW in typical configurations, extending battery life for field instruments. The integrated ADC digitizes sensor inputs (temperature, pressure, voltage) without external analog ICs, while 1.0 Mb of user flash stores calibration constants and waveform tables. Compared with SRAM FPGAs, MAX 10 eliminates boot PROMs, reducing board area and BOM cost.
おすすめ
Automotive Infotainment Subsystems
Automotive infotainment, telematics, and cluster controllers use the 10M16DCF256A7G to bridge legacy vehicle networks (CAN, LIN) with modern displays and wireless modules. The 178 I/Os drive multiple TFT panels, touch controllers, and audio codecs, while the MAX 10's robust dual-boot flash ensures reliable field upgrades across the vehicle lifetime. The 256-FBGA package is qualified to AEC-Q100 grade 2 standards for automotive environments, though designers targeting extreme thermal ranges should validate against the specific Intel automotive datasheet. The integrated ADC monitors battery voltage and temperature.
おすすめ
IoT Edge Sensor Nodes
IoT edge gateways and sensor aggregation nodes benefit from the 10M16DCF256A7G's combination of processing density and instant-on capability. The 16K LEs run lightweight machine-learning inference (decision trees, small CNNs) and protocol conversion (Modbus, MQTT, OPC-UA) simultaneously, while 1.0 Mb user flash stores firmware images and device certificates. The integrated ADC reads analog sensors directly, and 178 I/Os interface with digital sensors, actuators, and wireless modules. Compared with microcontroller-based designs, MAX 10 offers deterministic parallel processing and easy custom peripheral addition.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 10M16DCF256A7G — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 10M16DAF256C7G | 10M16DAF256A7G | 10M16DAF256C8G | 10M04DCF256A7G | 10M08DCF256A7G |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 256-LBGA | 256-LBGA - same | 256-LBGA - same | 256-LBGA - same | 256-LBGA - same | 256-LBGA - same |
| Logic Elements | 16,000 | 16,000 | 16,000 | 16,000 | 4,000 | 8,000 |
| Embedded Memory (bits) | 562,176 | 562,176 | 562,176 | 562,176 | 189,440 | 378,880 |
| Maximum User I/O | 178 | 178 | 178 | 178 | 178 | 178 |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | A7 (DC - standard power) | C7 (DA - lower power) | A7 (DA - lower power) | C8 (DA - lower power) | A7 (DC - standard power) | A7 (DC - standard power) |
| User Flash | 1.0 Mb | 1.0 Mb | 1.0 Mb | 1.0 Mb | 0.3 Mb | 0.6 Mb |
| RoHS Compliance | Yes | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- Standard-power speed grade with industrial temperature support （vs 10M16DAF256C7G)
- Highest logic density in MAX 10 family for this footprint （vs 10M08DCF256A7G)
- Larger embedded memory and user flash than lower-density siblings （vs 10M04DCF256A7G)
設計ノート
The 256-LBGA package uses a 1.0 mm ball pitch and requires a 4-layer PCB minimum with continuous GND planes under the device. Per Intel pin connection guidelines, all VCCINT and VCCIO balls must be decoupled with 100 nF X7R capacitors placed within 2 mm of each ball group, plus bulk 10 uF and 47 uF polymer/tantalum capacitors on each supply rail. Unused I/O banks should be configured as tri-stated inputs with weak pull-up enabled to avoid floating inputs.
MAX 10 FPGAs in the 256-LBGA package dissipate up to approximately 1.5 W in typical industrial configurations. With a theta_JA in the range of 20-25 C/W for the 256-FBGA on a 4-layer JEDEC test board, junction-to-ambient temperature rise is approximately 30-38 C. For sealed enclosures without forced airflow, provide a thermal copper pour under the exposed pads and consider thermal vias to inner GND planes. Industrial temperature operation is rated -40C to +100C junction.
Three common pitfalls when designing with the 10M16DCF256A7G: (1) failing to configure unused I/O pins as analog inputs or tri-stated with weak pull-up - floating inputs draw excessive current and can cause CRC errors during configuration; (2) routing LVDS pairs without length matching within 150 mil tolerance - the MAX 10 LVDS receivers require matched skew; (3) omitting the external configuration reset supervisor - the dual-boot flash can recover from bad images only if the nSTATUS and nCONFIG pins are properly monitored by the system controller.
コンプライアンス情報
RoHS and REACH compliant per Intel product page. Lead-free (Pb-free) reflow supported per JEDEC J-STD-020. AEC-Q100 grade not claimed on this industrial-grade variant; consult Intel automotive MAX 10 datasheet for AEC-Q100 qualified versions.
