5CSEBA4U19C8N - Cyclone V SE SoC FPGA, 40K LE, Dual ARM Cortex-A9 | Intel
部品番号: 5CSEBA4U19C8N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $86.39 | $86.39 |
| 10 | $78.5 | $785.00 |
| 100 | $68.2 | $6,820.00 |
| 500 | $60.1 | $30,050.00 |
| 1,000 | $54.75 | $54,750.00 |
5CSEBA4U19C8N 概要
A System-on-Chip (SoC) FPGA is an integrated circuit that combines a programmable FPGA fabric and a hard processor system (typically one or more ARM Cortex cores) on the same silicon die, allowing hardware-accelerated custom logic to communicate with the processor via a high-bandwidth on-chip interconnect. In the broader IC taxonomy, SoC FPGAs sit between microcontrollers (fixed peripherals, lower performance) and discrete FPGA + external processor pairings (more design flexibility but higher latency and BOM cost). The Cyclone V SE family belongs to Intel's low-power 28nm FPGA portfolio, positioned below Cyclone 10 and high-performance Stratix 10 parts but offering the lowest static power of the Cyclone V families.
Key differentiating features of the 5CSEBA4U19C8N include 40K logic elements, integrated DDR3 controller in the HPS, support for ARM TrustZone security extensions, on-chip CoreSight debug and trace, and a wide variety of HPS peripherals (USB 2.0, Gigabit Ethernet, CAN, UART, SPI, I2C). The device also provides programmable FPGA I/O supporting LVDS, LVCMOS, SSTL, and other standards via dedicated transceivers. Compared to other Cyclone V variants, the SE series omits the dedicated transceiver channels found in Cyclone V GT devices, trading high-speed serial capability for lower power and lower cost.
Typical applications include industrial motor control, factory automation HMIs, video surveillance and machine vision, automotive infotainment prototypes, and embedded vision pipelines where the FPGA fabric accelerates image processing while the ARM cores handle OS-level tasks such as networking and user interface. The integrated HPS also makes the part attractive for IoT edge gateways running Linux.
When designing with this device, engineers should plan the PCB layout around the 484-pin BGA power distribution network and ensure decoupling is sized for both FPGA core and HPS power rails. Programming flows use Intel Quartus Prime with the SoC EDS toolchain for the ARM subsystem.
ドロップイン代替品: 5CSEBA4U19C8N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5CSEBA4U19C8N （同一形状・フットプリント） — 相違点: Package, Logic Elements, DSP Blocks, Process Technology, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
5CSEBA4U19C7N
✅ ドロップイン✓ 在庫あり
$36.92 / 個
データシートを見る →5CSEBA4U19C6N
✅ ドロップイン✓ 在庫あり
$74.5 / 個
データシートを見る →5CSEBA2U19C8N
✅ ドロップイン✓ 在庫あり
$52.4 / 個
データシートを見る →5CSEBA4U19A7N
✅ ドロップイン✓ 在庫あり
$99.9 / 個
データシートを見る →5CSEBA4U19C7SN
✅ ドロップイン✓ 在庫あり
$218 / 個
データシートを見る →5CSEBA4U19C8N 最大定格＆電気的特性
| Family | Cyclone V SE SoC FPGA |
| Logic Elements | 40K |
| Hard Processor System | Dual ARM Cortex-A9 MPCore with CoreSight |
| HPS Maximum Frequency | 600 MHz |
| FPGA Fabric Speed Grade | -8 |
| パッケージ | 484-UBGA (19x19 mm) |
| 動作温度 | 0C to +85C (commercial) |
| Process Technology | TSMC 28nm low-power |
| User I/O Count | 161 |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant |
| Lead-Free | Yes |
| MSLレベル | 3 (168 hours) |
| Transceivers | None (SE variant - no high-speed transceivers) |
| Configuration Method | Serial (EPCS) and Parallel |
5CSEBA4U19C8N 484-ubga (19x19 mm) ピン配置ガイド
5CSEBA4U19C8N (484-ubga (19x19 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: 5CSEBA4U19C8N.
詳細は データシート をご参照ください。
主な用途
5CSEBA4U19C8N の用途: 6 件s: Industrial Motor Control, Machine Vision and Embedded Vision, Automotive Infotainment Prototyping, IoT Edge Gateway and Industrial Networking, Medical Diagnostic Equipment Prototyping, Software-Defined Radio and Signal Processing.
Industrial Motor Control
The 5CSEBA4U19C8N fits industrial motor control applications because its dual ARM Cortex-A9 HPS runs real-time Linux or RTOS for motion control loops, while the 40K logic elements implement custom PWM generation, encoder decoding, and field-oriented control (FOC) accelerators. The Cyclone V SE FPGA fabric delivers deterministic sub-microsecond latency for current-loop control at switching frequencies up to 100 kHz, surpassing pure software implementations. With 161 user I/O and built-in CAN, Ethernet, and UART peripherals, the device connects directly to motor driver boards without external bridge chips, reducing BOM cost.
おすすめ
Machine Vision and Embedded Vision
For machine vision pipelines, the 5CSEBA4U19C8N's FPGA fabric accelerates image preprocessing (filtering, edge detection, color space conversion) at line rates that ARM cores cannot match, while the HPS runs OpenCV-based classification and decision logic. The 40K LE budget supports parallel processing of 720p video streams at 60 fps using variable-precision DSP blocks, and the integrated DDR3 controller in the HPS provides high-bandwidth frame buffer access. The lack of high-speed transceivers (SE variant) means MIPI or parallel LVDS sensor interfaces must be implemented through FPGA I/O, which is feasible up to ~1 Gbps aggregate.
おすすめ
Automotive Infotainment Prototyping
The 5CSEBA4U19C8N supports automotive infotainment prototyping with its dual-core ARM Cortex-A9 capable of running Android or Linux for HMI rendering, while the FPGA fabric handles accelerated audio DSP, video scaling, and display timing generation. The commercial 0C to +85C temperature range is suitable for cabin-mounted prototypes but production automotive deployments should migrate to the industrial-grade 5CSEBA4U19A7N variant (-40C to +100C). The SoC architecture eliminates the latency of an external host processor communicating with a standalone FPGA over PCIe or USB, enabling tightly synchronized audio/video pipelines.
おすすめ
IoT Edge Gateway and Industrial Networking
The 5CSEBA4U19C8N operates as an IoT edge gateway by running a Linux distribution on the ARM HPS for protocol translation (MQTT, Modbus, OPC-UA) while offloading packet processing, encryption, and traffic shaping to the FPGA fabric. With Gigabit Ethernet MAC, USB 2.0, CAN, and UART integrated into the HPS, the device aggregates fieldbus data without external bridge chips. The Cyclone V SE family's low static power makes the part suitable for fanless edge installations, and the shared DDR3 controller supports up to 4 GB of system memory for local analytics.
おすすめ
Medical Diagnostic Equipment Prototyping
For medical diagnostic prototypes, the 5CSEBA4U19C8N's FPGA fabric implements deterministic signal acquisition pipelines for ultrasound beamforming, ECG processing, or patient monitoring sensor fusion, while the ARM HPS hosts the user interface, database connectivity, and HL7/DICOM protocol stack. The commercial temperature grade suits laboratory and clinical environments; for field-deployed devices the industrial-grade 5CSEBA4U19A7N is recommended. Hardware isolation between FPGA logic and HPS subsystems supports IEC 62304 software lifecycle requirements common in medical device development.
おすすめ
Software-Defined Radio and Signal Processing
The 5CSEBA4U19C8N enables software-defined radio prototypes by placing digital up/down-conversion, filtering, and modulation/demodulation in the FPGA fabric, while the HPS executes higher-level MAC-layer protocols and network interfaces. Although the SE variant lacks dedicated transceivers, the FPGA I/O supports LVDS interfaces to external ADC/DAC chips operating in the sub-1 GHz IF range. The 40K LE budget supports one or two simultaneous narrowband channels; broadband multi-channel designs should step up to the higher-density 5CEFA9F23I7N Cyclone V E family members.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5CSEBA4U19C8N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5CSEBA4U19C7N | 5CSEBA4U19C6N | 5CSEBA2U19C8N | 5CSEBA4U19A7N | 5CSEBA4U19C7SN |
|---|---|---|---|---|---|---|
| Package | 484-UBGA (19x19) | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 40K | 40K | 40K | 25K | 40K | 40K |
| Speed Grade | -8 | -7 | -6 | -8 | -7 | -7 |
| Temperature Grade | Commercial (0C to +85C) | Commercial | Commercial | Commercial | Industrial (-40C to +100C) | Commercial |
| HPS | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | ||
| User I/O Count | 161 | 161 | 161 | 161 |
主な差別化要因
- Higher Fmax timing margin versus slower speed grade variants （vs 5CSEBA4U19C7N)
- 40K logic elements versus 25K in lower-density same-package variant （vs 5CSEBA2U19C8N)
- Lower cost versus industrial temperature grade variant （vs 5CSEBA4U19A7N)
設計ノート
The 5CSEBA4U19C8N requires multiple power rails including VCC (core), VCCPD (I/O pre-driver), VCCIO (I/O banks), and separate HPS rails (VCC_HPS, VCC_HPS_IO). Decoupling requires bulk capacitors near each BGA power pin pair plus high-frequency 0.1uF MLCCs within 2mm of every fourth pin. Estimate (input values: 40K LE utilization at 100 MHz toggle, dual-core HPS at 600 MHz): static power approximately 0.5W, dynamic power 1.5-2.5W typical. Designers should budget for a 4-layer PCB minimum to provide adequate power planes.
The 484-UBGA package with 19x19mm body has a 0.8mm ball pitch. PCB design requires HDI stackup with microvias-in-pad or sub-100um via capture pads; standard 4-layer FR-4 with 4-mil trace/space is the practical minimum. Escape routing must use dog-bone fanout from inner rows; full via-in-pad requires ENIG plating and adds cost. Reference Intel Cyclone V device handbook pin connection guidelines for unused pin tie-off requirements.
Do not assume SE and SX Cyclone V variants share the same pinout - SE lacks transceivers so transceiver ball positions may be repurposed for additional GPIO or GND. Also, configuring this part requires Quartus Prime 16.0 or later; older Quartus II versions do not recognize the 5CSEBA4U19C8N ordering code. The HPS boot source (EPCS flash, SD card, or JTAG) must be selected via MSEL pins before power-up; incorrect MSEL state causes silent boot failure.
Estimated thermal analysis at typical operating conditions (input values: total power 2.5W, ambient 25C, no heatsink): the 484-UBGA package has theta_JA approximately 15-20 C/W on a 4-layer JEDEC test board, resulting in a 40-50C junction temperature rise above ambient. Commercial grade parts (0C to +85C junction) have approximately 30-35C thermal margin, so passive cooling is acceptable for most embedded applications without active airflow. For enclosed industrial cabinets above 50C ambient, a small clip-on heatsink is recommended.
コンプライアンス情報
RoHS and REACH compliance per Intel product declaration. Not AEC-Q100 qualified; for automotive applications use AEC-Q100 qualified variants or contact Intel for automotive-grade Cyclone V SE ordering codes. Conflict minerals reporting per Intel CMRT filings.
