EPC2LC20N-W vs EPC2LC20NU 비교

다음의 상세 나란히 비교: EPC2LC20N-W 제조: Altera 및 EPC2LC20NU 제조: Altera. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 EPC2LC20N-W EPC2LC20NU
브랜드 Altera Altera
카테고리 Memory ICs Memory ICs
수명 주기 상태 Obsolete Obsolete
재고 상태 In Stock In Stock
단가 (USD) $6.45 $8.20
메모리 유형 EPROM (UV-erasable, ISP) —
메모리 크기 1.6 Mbit —
Programmable Type In System Programmable —
Configuration Interface Serial (DATA, DCLK, OE, nCS) —
Internal Oscillator Frequency 66.7 MHz —
Supply Voltage (VCC) 3.0 V to 3.6 V, 4.75 V to 5.25 V 3.0 V to 3.6 V
ISP Interface JTAG (IEEE 1149.1) —
Supported FPGA Families APEX 20K, ACEX 1K, Mercury, FLEX 10K, Stratix, Cyclone —
패키지 20-LCC (J-Lead) PLCC-20 20-pin J-lead PLCC (9x9 mm)
실장 유형 Surface Mount Surface Mount
Packaging Tape & Reel (-W suffix) —
Cascade Support Yes (with other EPC2 devices) Yes - daisy-chain for larger bitstreams
핀 수 20 —
Lead-Free / RoHS [DATA_NEEDED: RoHS status for -W variant] Non-LEAD / non-RoHS (NU suffix = matte tin Sn finish, not Pb-free)
동작 온도 [DATA_NEEDED: operating temperature range] 0C to +70C (commercial)
기능 — In-System Programmable Configuration PROM
Memory Density — 1.6 Mbit
FPGA Interface — Altera serial (4-pin: nCS, DCLK, DATA, nINIT_CONF)
I/O Tolerance — 5 V tolerant inputs (per datasheet, except JTAG pins)
Programming Method — In-system via IEEE 1149.1 JTAG
JTAG Support — Yes (IEEE Std 1149.1 boundary-scan compliant)
Minimum DC Input — -0.3 V (inputs may undershoot to -2.0 V for <20 ns)
Maximum Overshoot — 7.0 V for <100 mA and <20 ns
Compatibility — Altera APEX 20K, APEX II, Mercury, FLEX 10K, ACEX 1K, Cyclone (legacy serial configuration)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청