A3PE3000-1FGG324I - 3M-Gate ProASIC3E Flash FPGA | Microchip
부품 번호: A3PE3000-1FGG324I ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
A3PE3000-1FGG324I 개요
An FPGA (field programmable gate array) is a semiconductor device containing a fabric of configurable logic blocks, routing resources, and programmable I/O that designers configure in the field. The ProASIC3E family belongs to the flash-based FPGA category, which sits within the broader hierarchy of programmable logic: FPGA -> programmable logic device -> digital logic IC. Unlike SRAM-based FPGAs, flash-based parts configure instantly at power-up (Live-at-Power-Up Level 0 support) and operate as true single-chip solutions without an external configuration device.
Key features include 3 million system gates, up to 504 kbits of true dual-port SRAM, optional soft ARM support, reprogrammability with low total cost of ownership, and industrial temperature operation. The 324-ball FBGA (19x19 mm, 1 mm pitch) surface-mount package provides 221 user I/Os on this device while the family supports up to 616 user I/Os in larger packages.
The ProASIC3E fabric achieves system performance up to approximately 310 MHz and integrates embedded block RAM for FIFOs, buffers, and soft CPU implementations. The flash switch technology is inherently non-volatile and secure against cloning, an advantage over SRAM FPGAs that require bitstream loading.
Typical applications include industrial automation control, aerospace and defense systems, communications and networking equipment, and medical instrumentation where single-chip, instant-on, secure programmable logic is required.
When designing with this device, verify I/O bank voltage assignments and thermal budget: the junction temperature range is -40C to +100C (TJ), and used differential I/O pairs reduce available single-ended I/O count per the datasheet.
This page synthesizes distributor pricing references, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Pricing as of 2026-09-02; A3PE3000 family listed as Active by distributors with a typical 8-week manufacturer lead time.
드롭인 대체품: A3PE3000-1FGG324I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A3PE3000-1FGG324I (동일 폼 팩터 및 풋프린트) — 차이점: Package, Family, Process Technology, Operating Temperature, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A3PE3000-2FGG324I
✅ 드롭인✓ 재고 있음
$1 / 개
데이터시트 보기 →A3PE3000-FGG324I
✅ 드롭인✓ 재고 있음
$198 / 개
데이터시트 보기 →A3PE3000-FGG324
✅ 드롭인✓ 재고 있음
$335.22 / 개
데이터시트 보기 →A3PE3000-2FGG324
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$216 / 개
데이터시트 보기 →A3PE3000L-FGG324I
✅ 드롭인✓ 재고 있음
$62.65 / 개
데이터시트 보기 →A3PE3000L-1FGG324I
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →A3PE3000-1FGG324I 최대 정격 & 전기적 특성
| Family | ProASIC3E (Flash-based FPGA) |
| System Gates | 3,000,000 |
| User I/Os (this package) | 221 |
| Max User I/Os (family) | 616 |
| Embedded SRAM | 504 kbits true dual-port |
| Supply Voltage (core) | 1.425 V to 1.575 V (1.5 V nominal) |
| Process Technology | 130-nm, 7-layer metal (6 copper), flash-based CMOS |
| Configuration | Flash-based, Live-at-Power-Up Level 0, single-chip |
| Soft CPU Support | Optional soft ARM support |
| 패키지 | 324-BGA FBGA (19x19 mm, 1 mm pitch) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +100C (TJ) |
| Number of Gates | 3,000,000 |
| Speed Grade | -1 |
| Packaging | Tray |
| RoHS 상태 | ROHS3 Compliant |
| Product Status | Active |
| Manufacturer Lead Time | 8 weeks |
A3PE3000-1FGG324I 324-bga fbga (19x19 mm, 1 mm pitch) 핀 구성 가이드
A3PE3000-1FGG324I(324-bga fbga (19x19 mm, 1 mm pitch) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A3PE3000-1FGG324I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A3PE3000-1FGG324I 적합 용도: 6 애플리케이션s: Industrial Automation and Control, Aerospace and Defense Electronics, Communications and Networking Equipment, Medical Instrumentation, Test and Measurement Systems, Secure Embedded Systems.
Industrial Automation and Control
The A3PE3000-1FGG324I fits industrial automation controllers because its 3-million-gate flash fabric integrates PLC logic, motor-control state machines, and fieldbus interfaces in one chip, while its -40C to +100C junction rating covers harsh cabinet environments. Live-at-Power-Up flash configuration means the FPGA is functional within microseconds of supply ramp, eliminating boot delay in safety-relevant interlocks and removing the external configuration flash that adds a failure point on noisy factory floors. Used as the main control fabric between 1.5V core and 3.3V I/O banks, it implements deterministic logic with family performance up to ~310 MHz. Trade-off: as an LUT-based fabric rather than an MCU, control algorithms are implemented in HDL, and power dissipation must be budgeted since the part is not the lowest-power option in the ProASIC3 lineup.
추천
Aerospace and Defense Electronics
Flash-based ProASIC3E devices are widely used in aerospace and defense because the non-volatile flash switch technology is inherently resistant to bitstream interception and configuration readback, and the single-chip configuration removes SEU-prone external boot flash at power-up. The A3PE3000-1FGG324I provides 3 million system gates and 504 kbits of true dual-port SRAM, enough for sensor-interface bridging, encryption preprocessing, and bus protocol conversion (MIL-STD-1553-style interfaces built as soft IP). The -1 speed grade with industrial temperature operation suits avionics auxiliary processing where instant-on behavior matters more than peak fabric frequency. Design consideration: differential I/O pair usage reduces available single-ended I/O count per the datasheet, so pin budgeting in constrained 221-I/O designs requires early planning.
추천
Communications and Networking Equipment
In networking line cards and aggregation equipment, the A3PE3000-1FGG324I serves as glueless bridge logic between PHYs, MACs, and backplane interfaces. Its 221 user I/Os in a compact 19x19 mm 324-FBGA support multiple I/O standards with differential signaling options, and the 504-kbit true dual-port SRAM implements FIFOs and packet buffers without external memory for moderate throughput paths. The flash fabric starts operating instantly at power-up, which is valuable in systems with strict link-establishment timing, and reprogrammability enables in-field feature updates without board changes. Performance consideration: family fabric speed reaches approximately 310 MHz, sufficient for many protocol engines, but designs needing multi-gigabit SERDES must look to transceiver-equipped FPGA families instead, since ProASIC3E has no hardened serial links.
추천
Medical Instrumentation
Medical diagnostic equipment benefits from the A3PE3000-1FGG324I's deterministic, instant-on flash fabric for sensor timing, front-end sequencing, and interface conversion between analog front ends and host processors. The 3-million-gate capacity hosts soft ARM support for embedded control, while the true dual-port SRAM (504 kbits) buffers acquisition data with independent read/write ports. Live-at-Power-Up Level 0 support ensures measurement chains are ready before host software boots, shortening startup sequences in clinical workflows, and the reprogrammable fabric supports instrument reconfiguration for multi-modality platforms. The industrial-grade -40C to +100C junction range comfortably covers controlled clinical environments with margin. Designers should verify I/O bank voltages against sensor interface levels and budget thermal dissipation within enclosure airflow limits.
추천
Test and Measurement Systems
Bench instruments and automated test equipment use the A3PE3000-1FGG324I as a reconfigurable timing, triggering, and instrumentation-bus engine. The 3-million-gate fabric implements timestamping counters, trigger matrices, and protocol-decoding IP, while 221 user I/Os with multiple single-ended and differential standards connect to analog front ends and digital channel boards. Flash-based Live-at-Power-Up configuration guarantees the instrument's protection and interlock logic is active the instant power is applied - important for protecting devices under test. The 19x19 mm FBGA conserves card space in modular instrument chassis. Trade-off: the -1 speed grade's fabric performance (~310 MHz family maximum) is adequate for most triggering but designs requiring multi-GHz sampling control need dedicated ASIC or transceiver FPGA solutions.
추천
Secure Embedded Systems
Applications requiring design IP protection choose the A3PE3000-1FGG324I because flash-based FPGA configuration is stored on-chip and does not require loading a bitstream at boot, removing the interception window that SRAM FPGAs have during configuration. The single-chip Live-at-Power-Up architecture means no external configuration device can be probed or substituted. With 3 million system gates and optional soft ARM support, the device hosts proprietary processing logic plus soft-processor control, and 504 kbits of true dual-port SRAM supports on-chip buffering that minimizes external bus exposure. This makes it suitable for licensing-control dongles, secure industrial gateways, and proprietary algorithm acceleration. Consideration: flash cells have finite program/erase endurance, so field reprogramming frequency should be bounded per the datasheet endurance specification.
추천
추천 제품 요약
엔지니어링 참조 데이터: A3PE3000-1FGG324I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A3PE3000-2FGG324I | A3PE3000-FGG324I | A3PE3000L-FGG324I | A3PE3000L-1FGG324I |
|---|---|---|---|---|---|
| Package | 324-FBGA (19x19 mm, 1 mm pitch) | 324-FBGA - same | 324-FBGA - same | 324-FBGA - same | 324-FBGA - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 3,000,000 | 3,000,000 | 3,000,000 | 3,000,000 (low-power) | 3,000,000 (low-power) |
| User I/Os | 221 | 221 | 221 | 221 | 221 |
| Speed Grade | -1 | -2 (faster) | standard | standard (L) | -1 (L) |
| Temperature Range | -40C to +100C (TJ, industrial) | Industrial (I suffix) | Industrial (I suffix) | Industrial (I suffix) | Industrial (I suffix) |
| Configuration | Flash-based, Live-at-Power-Up, single-chip | Flash-based - same | Flash-based - same | Flash-based - same | Flash-based - same |
주요 차별점
- Lowest-cost speed grade with full 3M-gate capacity (vs A3PE3000-2FGG324I)
- Industrial temperature rating (vs A3PE3000-FGG324)
- Standard-grade alternative for non-timing-critical rebuilds (vs A3PE3000-FGG324I)
- Full-power fabric for maximum logic throughput (vs A3PE3000L-FGG324I)
설계 노트
The A3PE3000-1FGG324I requires a 1.5V core supply regulated to 1.425V-1.575V. Estimate core current by running static and dynamic power analysis in Libero SoC for your specific design; dynamic power scales with toggle rate and clock tree loading, and a 3M-gate fabric can dissipate watts at high utilization. Provide dedicated 1.5V and I/O bank regulators with adequate margin, and sequence I/O banks after core per the ProASIC3E datasheet power-up requirements to avoid latch-up risk.
The 324-ball FBGA at 1 mm pitch requires a fine-pitch BGA footprint with via-in-pad or dogbone escape routing; a 19x19 mm body with full 221-I/O usage may need 4+ signal layers plus dedicated power/ground planes for clean I/O bank returns. Solder the exposed ball array with a standard SAC lead-free profile per JEDEC-style BGA reflow guidelines and inspect with X-ray given the hidden joints. Follow the DS0098 datasheet ball map exactly when generating the land pattern.
Remember that each used differential I/O pair reduces available single-ended I/Os by two, and for A3PE3000 devices the usage of certain I/O standards is limited (per the DS0098 datasheet). Designers converting from SRAM FPGAs often forget the flash fabric is instant-on: ensure board power sequencing assumes the FPGA I/O may drive immediately at power-up. Also note the -40C to +100C rating is junction temperature (TJ), not ambient - derate for self-heating in enclosed systems.
규정 준수 정보
ROHS3 Compliant per Microchip USA distributor listing. REACH, halogen-free, and conflict-minerals status not stated in retrieved data - confirm on official Microchip product page.
