ATSAMA5D28C-LD1G-CUR - Cortex-A5 MPU 500MHz 289-LFBGA | Microchip
부품 번호: ATSAMA5D28C-LD1G-CUR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $26.75 | $267.50 |
| 100 | $24.2 | $2,420.00 |
| 500 | $21.85 | $10,925.00 |
| 1,000 | $19.4 | $19,400.00 |
ATSAMA5D28C-LD1G-CUR 개요
An Arm Cortex-A5 MPU is a 32-bit application-class processor core based on the ARMv7-A architecture, designed for low-power Linux and RTOS workloads in cost-sensitive embedded products. The Cortex-A5 family sits between the microcontroller-class Cortex-M cores and the higher-performance Cortex-A7/A9 cores, offering full application processor capability (MMU, caches, NEON/FPU optional) at relatively low power. The ATSAMA5D28C-LD1G-CUR belongs to Microchip's SAMA5D2 family, a line of heterogeneous MPUs that pair an Arm Cortex-A5 host core with the Cortex-M4 for real-time system control, and that target HMI, connectivity gateway, and industrial control applications.
Key differentiating features include 32 Kbytes of I-cache and 32 Kbytes of D-cache with NEON and FPU extensions, a 16-bit DDR2/LPDDR2/LPDDR3 external memory controller in addition to the integrated SiP memory, and a rich set of peripherals: two HS USB ports with PHY, two CAN-FD controllers, three FLEXCOMs (USART/SPI/TWI), a 1 Gbit Ethernet GMAC with 1588 support, an LCD controller up to WXGA, and an image sensor interface. Advanced security is provided by secure boot, hardware crypto accelerators (AES, SHA, TRNG), and tamper detection pins, making the part suitable for hardened edge devices.
The SAMA5D28 architecture uses a 65 nm low-power CMOS process and supports Linux (mainline), FreeRTOS via the M4 companion, and bare-metal SDK environments. The integrated SiP memory reduces BOM cost and eliminates the DDR PCB routing complexity that normally consumes four to six PCB layers, which is the central value proposition for compact, high-density designs.
Typical applications include industrial HMI panels, IoT edge gateways, building automation controllers, smart appliances, POS terminals, medical patient-monitoring displays, and 4G/LTE router CPE. For each of these the SiP integration, low-power profile, and Linux mainline support significantly shorten time-to-market. The part is also well-suited as an upgrade for legacy Cortex-A5 designs that need additional working memory.
When designing with this MPU, allocate PCB space for the 289-ball LFBGA escape routing (0.8 mm ball pitch) and ensure the four-layer minimum stack-up uses impedance-controlled traces for the DDR2/LPDDR2 paths. Plan boot media (QSPI NOR or e.MMC) carefully and use Microchip's SAMA5D2 System-in-Package BSP for Linux to reduce software bring-up time. For harsh environments, leverage the industrial -40C to +85C temperature range and on-die tamper features.
This page synthesizes distributor pricing, drop-in alternative comparisons, and practical PCB/software design notes not consolidated on the manufacturer datasheet.
드롭인 대체품: ATSAMA5D28C-LD1G-CUR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAMA5D28C-LD1G-CUR (동일 폼 팩터 및 풋프린트) — 차이점: Package, USB, Ethernet, Operating Temperature, Core Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATSAMA5D28C-LD2G-CUR
✅ 드롭인✓ 재고 있음
$15.4 / 개
데이터시트 보기 →ATSAMA5D28C-D1G-CU
✅ 드롭인✓ 재고 있음
$23.5 / 개
데이터시트 보기 →ATSAMA5D28C-LD1G-CU
✅ 드롭인✓ 재고 있음
$23.2 / 개
데이터시트 보기 →ATSAMA5D27C-LD1G-CU
✅ 드롭인✓ 재고 있음
$18.4 / 개
데이터시트 보기 →ATSAMA5D28B-CUR
✅ 드롭인✓ 재고 있음
$12.6 / 개
데이터시트 보기 →ATSAMA5D28C-LD1G-CUR 최대 정격 & 전기적 특성
| MPU Core | ARM Cortex-A5 |
| Core Count | 1 |
| 데이터 버스 폭 | 32-bit |
| Maximum CPU Clock | 500 MHz |
| Integrated Memory (SiP) | 2 Gbit LPDDR2 SDRAM |
| External Memory Support | DDR2, LPDDR2, LPDDR3, QSPI, e.MMC |
| L1 I-Cache / D-Cache | 32 Kbytes / 32 Kbytes |
| NEON / FPU | Yes (with single-precision FPU) |
| Operating Voltage (Core) | 1.2 V |
| Package Type | 289-LFBGA |
| Package Dimensions | 14 x 14 mm |
| Ball Pitch | 0.8 mm |
| 동작 온도 | -40C to +85C (Industrial) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
ATSAMA5D28C-LD1G-CUR 14 x 14 mm 핀 구성 가이드
ATSAMA5D28C-LD1G-CUR(14 x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATSAMA5D28C-LD1G-CUR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATSAMA5D28C-LD1G-CUR 적합 용도: 6 애플리케이션s: Industrial HMI Panels, IoT Edge Gateways, Building Automation Controllers, Smart Appliances / White Goods, POS Terminals, Medical Patient-Monitoring Displays.
Industrial HMI Panels
The ATSAMA5D28C-LD1G-CUR's 500 MHz Cortex-A5 core plus 2 Gbit integrated LPDDR2 provides ample headroom for Linux-driven Qt/GTK graphical HMIs at WXGA resolution. Its dedicated LCD controller (RGB up to WXGA at 60 fps) and on-chip touch controller I2C interface eliminate the need for an external graphics chip. Industrial -40C to +85C rating suits factory-floor deployments, while secure boot protects factory configuration IP.
추천
IoT Edge Gateways
The ATSAMA5D28C-LD1G-CUR's dual GMAC with IEEE 1588, dual CAN-FD, two HS USB ports, and three FLEXCOMs make it a multi-protocol gateway in a single chip. The 2 Gbit LPDDR2 SiP handles TLS/IPsec encrypted traffic buffers, while the Cortex-M4 companion core manages real-time sensor sampling. The SiP form factor reduces the gateway BOM and allows a 4-layer PCB instead of the 6+ layers an external DDR design would need.
추천
Building Automation Controllers
Building automation controllers benefit from the ATSAMA5D28C-LD1G-CUR's RS-485-capable FLEXCOMs (for Modbus and BACnet), Ethernet with PTP (for HVAC synchronization), and Cortex-M4 for real-time lighting loop control. The integrated 2 Gbit LPDDR2 supports BACnet trend-log buffers and KNX/IP stack tables. Linux mainline support means BACnet stacks (libiec61850, openbld) build without vendor patches.
추천
Smart Appliances / White Goods
Smart appliances such as connected ovens, washing machines, and HVAC indoor units use the ATSAMA5D28C-LD1G-CUR to drive a color LCD, run a connected mobile app, and manage multiple motor/sensor feedback loops. The Cortex-A5 runs a Linux Yocto distribution with Qt for UI, while the Cortex-M4 handles hard real-time motor control PWM, making it a heterogeneous processing platform. Its low-power modes suit Energy Star standby budgets.
추천
POS Terminals
POS terminals rely on the ATSAMA5D28C-LD1G-CUR's 2 Gbit LPDDR2 SiP to buffer payment cryptographic operations (RSA, ECC, AES) without external DRAM, while the secure-boot and tamper-detect pins protect PIN-pad keys. The display controller drives the cashier LCD and the customer-facing second display, while the image sensor interface supports an optional 1D/2D barcode camera. EMVCo and PCI-PTS 6 compliance are achievable with proper firmware.
추천
Medical Patient-Monitoring Displays
The ATSAMA5D28C-LD1G-CUR's industrial temperature range and IEC 60601-1 ready design (when paired with proper isolation) make it suitable for bedside patient monitors. Its WXGA LCD controller drives a 7-10 inch clinical display, the Cortex-A5 runs the HL7/FHIR stack, and the on-chip crypto accelerators handle DICOM encryption. The 2 Gbit LPDDR2 SiP provides the memory bandwidth needed for multi-parameter waveform rendering.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAMA5D28C-LD1G-CUR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAMA5D28C-LD2G-CUR | ATSAMA5D28C-D1G-CU | ATSAMA5D28C-LD1G-CU | ATSAMA5D27C-LD1G-CU | ATSAMA5D28B-CUR |
|---|---|---|---|---|---|---|
| Package | 289-LFBGA (14x14) | 289-LFBGA (14x14) - same | 289-LFBGA (14x14) - same | 289-LFBGA (14x14) - same | 289-LFBGA (14x14) - same | 289-LFBGA (14x14) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core / Clock | Cortex-A5 / 500 MHz | Cortex-A5 / 500 MHz - same | Cortex-A5 / 500 MHz - same | Cortex-A5 / 500 MHz - same | Cortex-A5 / 500 MHz - same | Cortex-A5 / 500 MHz - same |
| Integrated SiP Memory | 2 Gbit LPDDR2 | 4 Gbit LPDDR2 (+100%) | 1 Gbit DDR2 (different type, -50%) | 1 Gbit LPDDR2 (-50%) | 1 Gbit LPDDR2 (-50%) | No SiP memory, external DDR required |
| Ethernet GMAC | 2 (with IEEE 1588) | 2 - same | 2 - same | 2 - same | 1 (D27 family has 1 GMAC) | 2 - same (B-revision) |
| CAN-FD Controllers | 2 | 2 - same | 2 - same | 2 - same | 1 (D27 family reduced) | 2 - same (B-revision) |
| Tamper Detection / Secure Boot | Yes (C-revision hardened) | Yes - same | Yes - same | Yes - same | Yes (C-revision) | Basic secure boot only, no tamper pins |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same |
주요 차별점
- 2 Gbit integrated LPDDR2 SiP eliminates external DDR routing (vs ATSAMA5D28B-CUR)
- C-revision enhanced security with tamper detection pins (vs ATSAMA5D28B-CUR)
- Dual Ethernet GMAC vs single GMAC in D27 family (vs ATSAMA5D27C-LD1G-CU)
- Larger integrated LPDDR2 than the LD1G-CU sibling (vs ATSAMA5D28C-LD1G-CU)
설계 노트
The 289-LFBGA with 0.8 mm ball pitch requires a 4-layer PCB stack-up minimum, with the top layer dedicated to BGA escape, internal layers for high-speed signal routing, and a continuous ground plane on layer 4. Use Microchip's SAMA5D2 SiP reference design (Gerber set) as a starting point. Microvia (HDI) fabrication is recommended; standard 0.2 mm laser-drilled microvias avoid the dog-bone fanout complexity that through-hole vias would create. Match trace lengths for DDR2/LPDDR2 data lanes to within 25 mil of each other and the clock within 50 mil of the strobe to maintain signal integrity at 500 MHz operation.
The ATSAMA5D28C-LD1G-CUR typical power consumption is 1.5 W at full Cortex-A5 load with peripherals active. Estimated: with theta_JA of approximately 25 C/W on a standard 4-layer JEDEC test board, the junction-to-ambient temperature rise is ~38 C at peak load. In an enclosed industrial enclosure at 60 C ambient, the junction reaches ~98 C, which is still below the 100 C typical Tj_max but leaves little margin. For sealed enclosures add a small copper heat-spreader or thermal via array under the BGA to reduce theta_JA by 30-40%. The LFBGA's bottom-side thermal pad should be soldered to the PCB thermal land for best heat extraction.
Three common pitfalls when bringing up the ATSAMA5D28C-LD1G-CUR: (1) the boot mode straps (BMS) must be pulled correctly at reset - a floating strap on BMS[1:0] can leave the MPU in serial boot mode and confuse the host programmer; (2) the SiP LPDDR2 requires careful ZQ calibration and the DDR PHY register sequence must come from the latest SAMA5D2 BSP - older bootloaders sometimes initialize the SiP as standard DDR2, causing intermittent crashes; (3) the LCD controller's pixel clock must be sourced from a programmed PLL, not the main oscillator, to avoid jitter visible as pixel noise on WXGA panels. Always validate boot with the Microchip SAM-BA utility before flashing application images.
규정 준수 정보
RoHS and REACH compliance per Microchip product page. Not AEC-Q100 qualified - automotive designs should use the ATSAMA5D2x-CUR automotive-graded variants instead. Industrial -40C to +85C operating temperature supports most industrial environments.
