EP1AGX60DF780I6N - Arria GX FPGA, 60K LE, 3.125Gbps Transceivers
부품 번호: EP1AGX60DF780I6N ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $265 | $2,650.00 |
| 100 | $240 | $24,000.00 |
| 500 | $218 | $109,000.00 |
| 1,000 | $195 | $195,000.00 |
EP1AGX60DF780I6N 개요
An FPGA (Field-Programmable Gate Array) is a semiconductor device whose digital logic functionality is defined after manufacturing through user-supplied configuration bitstreams. FPGAs occupy the middle ground between ASICs (fixed function, high NRE) and microprocessors (software-defined). Within the broader taxonomy: FPGA -> programmable logic -> logic IC -> integrated circuit. Arria GX specifically targets cost-sensitive, transceiver-rich applications such as PCI Express endpoints, serial RapidIO, and proprietary serial links in the 1.5-3.125 Gbps range.
The EP1AGX60DF780I6N contains 60100 logic elements organized across 3005 LABs (Logic Array Blocks), with up to 350 user I/O pins exposed on the package. Memory is provided via M512, M4K, and M-RAM blocks totaling 2,528,640 bits. The embedded transceivers support multiple industry protocols and can be aggregated for higher throughput. Per the Mouser listing, this part is described as '3005 LABs 350 IOs'.
Architecturally, the device leverages Altera's Stratix-derived fabric, including dedicated 18x18 multipliers, four-phase PLLs, and a high-speed I/O ring. The 780-FBGA package supports transceiver channels and high-fanout logic simultaneously, requiring careful PCB stack-up and via-in-pad design for signal integrity at multi-gigabit rates. Designers should reference AN-503 from Altera for transceiver channel design and AN-487 for high-speed board layout.
Typical applications include PCI Express Gen1 endpoint cards, serial RapidIO bridges, XAUI / 10G backplanes, industrial video capture and processing, and telecom line cards where moderate logic density plus integrated transceivers reduce bill-of-materials cost versus discrete ASSP plus FPGA solutions. The industrial temperature grade extends the use case to outdoor or uncontrolled-thermal environments.
When designing with this part, allocate at least 6 PCB layers with controlled-impedance routing for transceiver channels, and observe the dedicated power-rail decoupling scheme (VCC, VCCA_PLL, VCCA_TX, VCCA_RX, VCCH) outlined in the Arria GX datasheet. Quartus II software version 9.0 or later is required for bitstream generation; older versions will not recognize the I6N device ID.
드롭인 대체품: EP1AGX60DF780I6N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1AGX60DF780I6N (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Logic Array Blocks (LABs), RoHS Status, Transceivers.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1AGX60DF780C6N
✅ 드롭인✓ 재고 있음
$142 / 개
데이터시트 보기 →EP1AGX60DF780C7
✅ 드롭인✓ 재고 있음
$195 / 개
데이터시트 보기 →EP1AGX60DF780I6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EP1AGX50DF780I6N
✅ 드롭인✓ 재고 있음
$255 / 개
데이터시트 보기 →EP1AGX50DF780I6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$295 / 개
데이터시트 보기 →EP1AGX60DF780I6N 최대 정격 & 전기적 특성
| Family | Arria GX |
| Logic Elements | 60,100 |
| Logic Array Blocks (LABs) | 3005 |
| Embedded Memory | 2,528,640 bits |
| Maximum User I/O | 350 |
| Transceivers | 3.125 Gbps (per Arria GX datasheet family spec) |
| 동작 온도 | -40C to +100C (industrial, I-grade) |
| Speed Grade | 6 |
| 패키지 | 780-pin FBGA (FineLine BGA) |
| PLL Count | 4 (per Arria GX family datasheet) |
| 실장 유형 | Surface Mount (BGA) |
| Lead-Free / Pb-Free | Yes (suffix 'N') |
| RoHS 상태 | Compliant (per distributor listings) |
EP1AGX60DF780I6N 780-pin fbga (fineline bga) 핀 구성 가이드
EP1AGX60DF780I6N(780-pin fbga (fineline bga) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP1AGX60DF780I6N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP1AGX60DF780I6N 적합 용도: 6 애플리케이션s: PCI Express Gen1 Endpoint Card, Serial RapidIO Bridge / Switch, XAUI / 10 Gigabit Backplane Aggregation, Industrial Video Capture / Processing, Telecom Line Card / DSP Front-End, Aerospace / Defense Signal Processing.
PCI Express Gen1 Endpoint Card
The EP1AGX60DF780I6N fits PCI Express Gen1 endpoint designs with 60,100 logic elements that comfortably host a Gen1 x4 or x8 protocol stack plus user application logic. Its 3.125 Gbps transceivers natively support PCIe Gen1 PMA signalling without external PHYs, reducing BOM cost and board area. Industrial temperature grade (I6N) allows deployment in factory-floor controllers and outdoor telecom equipment where commercial-grade parts would thermally derate. The 780-FBGA package supports the required transceiver channel count and 350 user I/O for legacy parallel peripheral bridging. Designers should use Altera's PCIe Compiler IP within Quartus II 9.0+ for hard IP integration.
추천
Serial RapidIO Bridge / Switch
The EP1AGX60DF780I6N's 3.125 Gbps transceivers provide native RapidIO physical-layer support, and 60,100 logic elements accommodate the RapidIO logical-layer controller plus packet-routing fabric for small switch configurations. Industrial temperature grade enables deployment in telecom base stations, military radios, and signal-processing chassis where -40C cold-start is mandatory. The 780-FBGA package offers ample transceiver channels for 4-lane x4 RapidIO links with margin for redundant paths. Compared to a discrete ASSP+FPGA partition, the integrated transceiver approach saves 30-50% board area in space-constrained VPX and ATCA blades.
추천
XAUI / 10 Gigabit Backplane Aggregation
For 10 Gigabit Ethernet backplane aggregation, the EP1AGX60DF780I6N provides four XAUI lanes via its 3.125 Gbps transceivers running in the 4x XAUI configuration, plus sufficient logic to implement a Layer-2 aggregator, MAC, and basic L3 lookup. The 780-FBGA package supports the required high-speed serial channel count while providing 350 user I/O for parallel system interfaces. Designers should follow AN-503 for XAUI PMA configuration and use pre-emphasis/de-emphasis settings calibrated to the backplane loss budget. Industrial temperature grade supports outdoor telecom cabinets.
추천
Industrial Video Capture / Processing
The EP1AGX60DF780I6N's 60,100 LE and 2,528,640 bits of embedded memory make it a strong fit for multi-channel industrial video capture and processing applications such as machine-vision frame grabbers, broadcast-quality SDI routers, and medical imaging pre-processors. The transceivers support SDI (Serial Digital Interface) at 270/1.485/2.97 Gbps through external SDI-over-transceiver IP. Industrial temperature rating enables deployment in factory-floor machine-vision systems and outdoor broadcast OB vans. The 780-FBGA package exposes sufficient LVDS pairs for parallel camera interfaces.
추천
Telecom Line Card / DSP Front-End
For telecom line cards, the EP1AGX60DF780I6N pairs transceivers for CPRI (Common Public Radio Interface) or OBSAI backhaul with sufficient logic density for baseband DSP pre-processing, framing, and timing distribution. The 18x18 multipliers (per Arria GX family) handle small FFT cores and channel filters, while the embedded M-RAM blocks provide buffer storage for symbol-level data. Industrial temperature grade qualifies the part for outdoor remote-radio-head (RRH) enclosures. Designers should use Altera's CPRI MegaCore for hard IP acceleration of the CPRI link layer.
추천
Aerospace / Defense Signal Processing
For aerospace and defense applications requiring industrial temperature grade and high logic density, the EP1AGX60DF780I6N serves as a transceiver-rich signal-processing engine for radar front-end digitisation, electronic-warfare channelisation, and software-defined radio (SDR) baseband blocks. The 780-FBGA package supports ruggedised board variants with underfill. Designers should pair the FPGA with appropriate ruggedisation processes (conformal coating, underfill) per IPC-A-610 Class 3. Note that full MIL-spec screening requires sourcing from authorised channels with extended-test flow.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1AGX60DF780I6N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1AGX60DF780C6N | EP1AGX60DF780C7 | EP1AGX60DF780I6 | EP1AGX50DF780I6N | EP1AGX50DF780I6 |
|---|---|---|---|---|---|---|
| Package | 780-FBGA | 780-FBGA - same | 780-FBGA - same | 780-FBGA - same | 780-FBGA - same | 780-FBGA - same |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 60,100 | 60,100 | 60,100 | 60,100 | 50,000 | 50,000 |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) |
| Speed Grade | 6 | 6 | 7 (faster) | 6 | 6 | 6 |
| Embedded Memory | 2,528,640 bits | 2,528,640 bits | 2,528,640 bits | 2,528,640 bits | 2,421,888 bits | 2,421,888 bits |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
주요 차별점
- Industrial temperature grade with full logic density (vs EP1AGX60DF780C6N)
- Higher logic density in the same 780-FBGA footprint (vs EP1AGX50DF780I6N)
- Pb-free / RoHS compliant for global market access (vs EP1AGX60DF780I6 (non-Pb-free variant))
설계 노트
The EP1AGX60DF780I6N requires multiple isolated supply rails: VCCINT (core), VCCIO (I/O banks), VCCA_PLL (PLL analog), VCCA_TX and VCCA_RX (transceiver analog), VCCH (transceiver auxiliary). Each rail requires its own decoupling network per the Arria GX datasheet pin-connection guidelines, with bulk capacitors within 50 mils of each BGA power pin. Estimate total power at approximately 8-12 W for a 60%-utilised design at 500 MHz; transceivers add another 1-2 W per active channel. Use a 6+ layer PCB with dedicated power planes.
The 780-FBGA package has a 1.0 mm ball pitch requiring 0.5 mm-diameter via-in-pad microvias for breakout routing. Per Altera AN-487, stack-up should be at least 6 layers with transceiver traces routed on stripline layers referenced to unbroken ground planes. Differential pair matching target is 100 ohm ±10% with intra-pair length matching to 1 ps and inter-pair matching to 5 ps for XAUI/PCIe compliance. Maintain at least 25 mil keep-out from BGA perimeter for via fan-out clearance.
Transceiver channels at 3.125 Gbps require pre-emphasis and equalisation configured per Altera AN-503 to compensate for backplane and connector losses. For PCIe Gen1, de-emphasis of -3.5 dB is typically required. For XAUI, adaptive equalisation handles backplane loss up to 12 dB at 1.5625 GHz. Always perform post-layout signal-integrity simulation with the Hspice or Quartus SI tool before committing to fabrication. Cost-of-PCB-rework after assembly of a 780-FBGA device is typically 5-10x the original PCB fab cost.
Three frequent design mistakes: (1) omitting transceiver auxiliary power filtering, causing PLL lock failures; (2) using commercial-grade parts in outdoor enclosures, leading to cold-start failures below 0C; (3) attempting bitstream migration between Quartus II major versions without regenerating IP cores. Always verify your Quartus version's device support matrix before starting a port, and always specify the I-grade (industrial) part for any deployment where ambient temperature can fall below 0C.
규정 준수 정보
RoHS compliant per Pb-free suffix 'N' convention. AEC-Q100 not applicable (FPGA, not automotive-grade IC). REACH and halogen-free status not stated in distributor listings; refer to Intel PSG material declaration for confirmation.
