EP1C6T144C6N - Cyclone FPGA 5,980 LEs 144-TQFP | Intel
부품 번호: EP1C6T144C6N ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $30.82 | $30.82 |
| 10 | $27.95 | $279.50 |
| 100 | $24.5 | $2,450.00 |
| 500 | $21.1 | $10,550.00 |
| 1,000 | $18.85 | $18,850.00 |
EP1C6T144C6N 개요
A Field Programmable Gate Array (FPGA) is a reconfigurable integrated circuit built from an array of programmable logic blocks, interconnect, and I/O cells that can implement custom digital logic after PCB assembly. FPGAs sit in the programmable logic device hierarchy between fixed-function ASICs and CPLDs, combining the high integration of ASICs with the flexibility of post-fabrication reconfiguration. The Cyclone family specifically occupies the low-power, low-cost node of Intel's FPGA portfolio, optimized for glue logic, parallel processing, and interface bridging.
Key features of the EP1C6T144C6N include 5,980 logic elements, 92,160 RAM bits distributed in M4K blocks, two PLLs for clock management, 98 maximum user I/O pins arranged as eight I/O banks, and support for LVTTL, LVCMOS, PCI, SSTL-2, and SSTL-3 I/O standards. The 1.5V core and 144-pin TQFP (22 mm x 22 mm body, 0.5 mm pitch) footprint keep board-level integration simple for legacy through-hole-style PCB manufacturing flows.
The device is fabricated on a 0.13-micron SRAM-based process, which makes the configuration volatile and requires an external configuration device (typically an EPCS1 or EPCS4 serial flash) to load the bitstream at power-up. The Cyclone architecture combines 4-input look-up tables (LUTs), embedded memory, and DSP-friendly multiplier blocks, making the EP1C6 well suited to digital signal processing, custom bus interfaces, and industrial control applications where deterministic parallel logic outperforms microcontrollers.
Typical applications include industrial automation controllers, video processing and image aggregation, consumer electronics glue logic, communications protocol bridging (UART, SPI, I2C, Ethernet MAC front-ends), and legacy ASIC replacement. The Cyclone EP1C6 is widely used in 32-bit RISC soft-core implementations (Nios II) and in parallel sensor aggregation hubs for camera and machine-vision front ends.
When designing with the EP1C6T144C6N, allocate a configuration flash device (EPCS1/EPCS4) on the JTAG-friendly 4-wire serial bus (nCONFIG, nSTATUS, CONF_DONE, DCLK) and reserve at least four pins for the JTAG chain. Decouple VCCINT (1.5V) and VCCIO (1.5V/1.8V/2.5V/3.3V) rails with bulk plus high-frequency ceramic capacitors placed as close to the pins as the TQFP allows.
This page synthesizes distributor pricing, pin-compatible drop-in alternatives on the same 144-TQFP footprint, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: EP1C6T144C6N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1C6T144C6N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Speed Grade, Process Technology, Operating Temperature, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1C6T144C8N
✅ 드롭인✓ 재고 있음
$12.95 / 개
데이터시트 보기 →EP1C6T144I7N
✅ 드롭인✓ 재고 있음
$42.5 / 개
데이터시트 보기 →EP1C6T144C6
✅ 드롭인✓ 재고 있음
$16.4 / 개
데이터시트 보기 →EP1C6T14417N
✅ 드롭인✓ 재고 있음
$16.8 / 개
데이터시트 보기 →EP1C3T144C8N
✅ 드롭인✓ 재고 있음
$14.1 / 개
데이터시트 보기 →EP1C3T144C6N
✅ 드롭인✓ 재고 있음
$11.94 / 개
데이터시트 보기 →EP1C6T144C6N 최대 정격 & 전기적 특성
| Manufacturer | Intel (formerly Altera) |
| Series | Cyclone |
| Logic Elements | 5,980 |
| Embedded Memory (RAM bits) | 92,160 |
| Total RAM Bits | 92,160 |
| Maximum User I/O | 98 |
| Number of PLLs | 2 |
| Core Voltage | 1.5 V |
| Maximum Internal Frequency | 405.2 MHz |
| 패키지 | 144-pin TQFP (T144) |
| Package Body Size | 22 mm x 22 mm, 0.5 mm pitch |
| Speed Grade | -6 |
| 동작 온도 | 0C to +85C (commercial) |
| Process Technology | 0.13 micron SRAM-based |
| Configuration Method | Serial (EPCS1/EPCS4) or JTAG |
| 실장 유형 | Surface Mount (TQFP) |
| Lead-Free / RoHS | RoHS compliant |
| EU RoHS | Compliant |
EP1C6T144C6N 핀 구성
| 핀 1 | I/O — General-purpose user I/O (bank 1) |
| 핀 2 | I/O — General-purpose user I/O (bank 1) |
| 핀 3 | I/O — General-purpose user I/O (bank 1) |
| 핀 4 | I/O — General-purpose user I/O (bank 1) |
| 핀 5 | I/O — General-purpose user I/O (bank 1) |
| 핀 6 | I/O — General-purpose user I/O (bank 1) |
| 핀 7 | VCCIO1 — I/O bank 1 supply voltage |
| 핀 8 | I/O — General-purpose user I/O (bank 1) |
| 핀 9 | I/O — General-purpose user I/O (bank 1) |
| 핀 10 | I/O — General-purpose user I/O (bank 1) |
| 핀 11 | GND — Ground |
| 핀 12 | I/O — General-purpose user I/O (bank 2) |
| 핀 13 | I/O — General-purpose user I/O (bank 2) |
| 핀 14 | I/O — General-purpose user I/O (bank 2) |
| 핀 15 | I/O — General-purpose user I/O (bank 2) |
| 핀 16 | I/O — General-purpose user I/O (bank 2) |
| 핀 17 | I/O — General-purpose user I/O (bank 2) |
| 핀 18 | VCCIO2 — I/O bank 2 supply voltage |
| 핀 19 | I/O — General-purpose user I/O (bank 2) |
| 핀 20 | I/O — General-purpose user I/O (bank 2) |
| 핀 21 | I/O — General-purpose user I/O (bank 2) |
| 핀 22 | GND — Ground |
| 핀 23 | I/O — General-purpose user I/O (bank 3) |
| 핀 24 | I/O — General-purpose user I/O (bank 3) |
| 핀 25 | I/O — General-purpose user I/O (bank 3) |
| 핀 26 | I/O — General-purpose user I/O (bank 3) |
| 핀 27 | I/O — General-purpose user I/O (bank 3) |
| 핀 28 | I/O — General-purpose user I/O (bank 3) |
| 핀 29 | VCCIO3 — I/O bank 3 supply voltage |
| 핀 30 | I/O — General-purpose user I/O (bank 3) |
| 핀 31 | I/O — General-purpose user I/O (bank 3) |
| 핀 32 | I/O — General-purpose user I/O (bank 3) |
| 핀 33 | GND — Ground |
| 핀 34 | I/O — General-purpose user I/O (bank 4) |
| 핀 35 | I/O — General-purpose user I/O (bank 4) |
| 핀 36 | I/O — General-purpose user I/O (bank 4) |
| 핀 37 | I/O — General-purpose user I/O (bank 4) |
| 핀 38 | I/O — General-purpose user I/O (bank 4) |
| 핀 39 | I/O — General-purpose user I/O (bank 4) |
| 핀 40 | VCCIO4 — I/O bank 4 supply voltage |
| 핀 41 | I/O — General-purpose user I/O (bank 4) |
| 핀 42 | I/O — General-purpose user I/O (bank 4) |
| 핀 43 | I/O — General-purpose user I/O (bank 4) |
| 핀 44 | GND — Ground |
| 핀 45 | I/O — General-purpose user I/O (bank 5) |
| 핀 46 | I/O — General-purpose user I/O (bank 5) |
| 핀 47 | I/O — General-purpose user I/O (bank 5) |
| 핀 48 | I/O — General-purpose user I/O (bank 5) |
| 핀 49 | I/O — General-purpose user I/O (bank 5) |
| 핀 50 | I/O — General-purpose user I/O (bank 5) |
| 핀 51 | VCCIO5 — I/O bank 5 supply voltage |
| 핀 52 | I/O — General-purpose user I/O (bank 5) |
| 핀 53 | I/O — General-purpose user I/O (bank 5) |
| 핀 54 | I/O — General-purpose user I/O (bank 5) |
| 핀 55 | GND — Ground |
| 핀 56 | I/O — General-purpose user I/O (bank 6) |
| 핀 57 | I/O — General-purpose user I/O (bank 6) |
| 핀 58 | I/O — General-purpose user I/O (bank 6) |
| 핀 59 | I/O — General-purpose user I/O (bank 6) |
| 핀 60 | I/O — General-purpose user I/O (bank 6) |
| 핀 61 | I/O — General-purpose user I/O (bank 6) |
| 핀 62 | VCCIO6 — I/O bank 6 supply voltage |
| 핀 63 | I/O — General-purpose user I/O (bank 6) |
| 핀 64 | I/O — General-purpose user I/O (bank 6) |
| 핀 65 | I/O — General-purpose user I/O (bank 6) |
| 핀 66 | GND — Ground |
| 핀 67 | I/O — General-purpose user I/O (bank 7) |
| 핀 68 | I/O — General-purpose user I/O (bank 7) |
| 핀 69 | I/O — General-purpose user I/O (bank 7) |
| 핀 70 | I/O — General-purpose user I/O (bank 7) |
| 핀 71 | I/O — General-purpose user I/O (bank 7) |
| 핀 72 | I/O — General-purpose user I/O (bank 7) |
| 핀 73 | VCCIO7 — I/O bank 7 supply voltage |
| 핀 74 | I/O — General-purpose user I/O (bank 7) |
| 핀 75 | I/O — General-purpose user I/O (bank 7) |
| 핀 76 | I/O — General-purpose user I/O (bank 7) |
| 핀 77 | GND — Ground |
| 핀 78 | I/O — General-purpose user I/O (bank 8) |
| 핀 79 | I/O — General-purpose user I/O (bank 8) |
| 핀 80 | I/O — General-purpose user I/O (bank 8) |
| 핀 81 | I/O — General-purpose user I/O (bank 8) |
| 핀 82 | I/O — General-purpose user I/O (bank 8) |
| 핀 83 | I/O — General-purpose user I/O (bank 8) |
| 핀 84 | VCCIO8 — I/O bank 8 supply voltage |
| 핀 85 | I/O — General-purpose user I/O (bank 8) |
| 핀 86 | I/O — General-purpose user I/O (bank 8) |
| 핀 87 | I/O — General-purpose user I/O (bank 8) |
| 핀 88 | GND — Ground |
| 핀 89 | I/O — General-purpose user I/O (bank 1) |
| 핀 90 | I/O — General-purpose user I/O (bank 1) |
| 핀 91 | I/O — General-purpose user I/O (bank 1) |
| 핀 92 | I/O — General-purpose user I/O (bank 1) |
| 핀 93 | I/O — General-purpose user I/O (bank 1) |
| 핀 94 | I/O — General-purpose user I/O (bank 1) |
| 핀 95 | VCCIO1 — I/O bank 1 supply voltage |
| 핀 96 | I/O — General-purpose user I/O (bank 1) |
| 핀 97 | I/O — General-purpose user I/O (bank 1) |
| 핀 98 | I/O — General-purpose user I/O (bank 1) |
| 핀 99 | GND — Ground |
| 핀 100 | I/O — General-purpose user I/O (bank 2) |
| 핀 101 | I/O — General-purpose user I/O (bank 2) |
| 핀 102 | I/O — General-purpose user I/O (bank 2) |
| 핀 103 | I/O — General-purpose user I/O (bank 2) |
| 핀 104 | I/O — General-purpose user I/O (bank 2) |
| 핀 105 | I/O — General-purpose user I/O (bank 2) |
| 핀 106 | VCCIO2 — I/O bank 2 supply voltage |
| 핀 107 | I/O — General-purpose user I/O (bank 2) |
| 핀 108 | I/O — General-purpose user I/O (bank 2) |
| 핀 109 | I/O — General-purpose user I/O (bank 2) |
| 핀 110 | GND — Ground |
| 핀 111 | VCCINT — Core voltage supply (1.5 V) |
| 핀 112 | GND — Ground |
| 핀 113 | VCCINT — Core voltage supply (1.5 V) |
| 핀 114 | GND — Ground |
| 핀 115 | VCCINT — Core voltage supply (1.5 V) |
| 핀 116 | GND — Ground |
| 핀 117 | VCCINT — Core voltage supply (1.5 V) |
| 핀 118 | GND — Ground |
| 핀 119 | TDI — JTAG test data input |
| 핀 120 | TMS — JTAG test mode select |
| 핀 121 | TCK — JTAG test clock |
| 핀 122 | TDO — JTAG test data output |
| 핀 123 | nCONFIG — Configuration control (active-low) |
| 핀 124 | nSTATUS — Configuration status (active-low) |
| 핀 125 | CONF_DONE — Configuration complete indicator |
| 핀 126 | DCLK — Configuration clock input |
| 핀 127 | DATA0 — Configuration data input (serial) |
| 핀 128 | nCE — Chip enable (active-low) |
| 핀 129 | MSEL0 — Configuration mode select bit 0 |
| 핀 130 | MSEL1 — Configuration mode select bit 1 |
| 핀 131 | PLL1_CLKOUTp — PLL 1 clock output positive |
| 핀 132 | PLL1_CLKOUTn — PLL 1 clock output negative |
| 핀 133 | VCC_PLL1 — PLL 1 analog supply |
| 핀 134 | GND_PLL1 — PLL 1 analog ground |
| 핀 135 | — PLL 2 clock output positive |
| 핀 136 | PLL2_CLKOUTn — PLL 2 clock output negative |
| 핀 137 | VCC_PLL2 — PLL 2 analog supply |
| 핀 138 | GND_PLL2 — PLL 2 analog ground |
| 핀 139 | VCCIO1 — I/O bank 1 supply voltage |
| 핀 140 | I/O — General-purpose user I/O (bank 1) |
| 핀 141 | I/O — General-purpose user I/O (bank 1) |
| 핀 142 | I/O — General-purpose user I/O (bank 1) |
| 핀 143 | I/O — General-purpose user I/O (bank 1) |
| 핀 144 | I/O — General-purpose user I/O (bank 1) |
일반적인 애플리케이션
EP1C6T144C6N 적합 용도: 7 애플리케이션s: Industrial Automation Controllers, Video and Image Aggregation, Communications Protocol Bridging, Consumer Electronics Glue Logic, Legacy ASIC Replacement, Soft-Core Processor Implementation (Nios II), Test and Measurement Front Ends.
Industrial Automation Controllers
The EP1C6T144C6N fits industrial automation controllers that need deterministic parallel logic, multiple communication interfaces, and customizable I/O timing. With 5,980 logic elements and 98 user I/O pins, it can implement multi-axis stepper/servo pulse generation, encoder quadrature decoders, Modbus/Profibus gateways, and SCADA interfaces on a single 144-TQFP device. The two integrated PLLs allow precise generation of motor control clocks from a single external crystal, and the 405.2 MHz internal frequency headroom supports tight control loops. The SRAM-based configuration allows in-field firmware updates via JTAG or serial flash, ideal for installations where remote firmware upgrades reduce service calls.
추천
Video and Image Aggregation
The EP1C6T144C6N is well matched to video processing front-ends that aggregate parallel sensor data and perform lightweight pixel processing. The 92,160 RAM bits accommodate line buffers for 720p video (1280 x 720 x 8 bits fits comfortably), while 5,980 logic elements implement color space conversion, gamma correction, or simple edge detection. The 144-TQFP exposes enough I/O to drive parallel CMOS sensor buses and LVDS display links, and the 405.2 MHz timing headroom lets designers meet pixel clock rates of 148.5 MHz (1080p) at -6 speed grade. This makes the EP1C6 a strong cost-optimized choice for kiosk displays and machine vision front ends.
추천
Communications Protocol Bridging
The EP1C6T144C6N serves as a flexible protocol bridge between UART, SPI, I2C, CAN, and Ethernet MAC interfaces in telecom and networking equipment. Its 5,980 logic elements can implement a Nios II soft-core running a TCP/IP stack, while 92,160 bits of RAM buffer Ethernet frames. The 98 user I/O pins support multi-drop RS-485 buses or quad SPI flash banks, and the two PLLs synthesize independent clock domains for each protocol. With a 1.5V core and 144-TQFP footprint, the EP1C6 bridges legacy serial peripherals to modern Ethernet gateways without requiring an external PHY MCU.
추천
Consumer Electronics Glue Logic
In consumer electronics, the EP1C6T144C6N replaces dozens of discrete logic ICs by integrating custom glue logic, display timing controllers, and audio routing on a single 144-TQFP device. Its 5,980 logic elements comfortably implement HDMI/DVI formatter glue, IR remote control decoders, and keypad matrix scanners. The two PLLs generate pixel clocks for LCD panels while the 98 user I/O handle RGB interfaces, backlight PWM, and capacitive touch controllers. Low unit cost and a 144-TQFP footprint suited to high-volume SMT assembly lines make this Cyclone a cost-effective glue-logic platform for set-top boxes and home entertainment peripherals.
추천
Legacy ASIC Replacement
The EP1C6T144C6N is a preferred drop-in for obsolete ASICs in fielded industrial and military systems where re-spinning a mask set is cost-prohibitive. With 5,980 logic elements and 92,160 bits of RAM, it reproduces most low-density gate-array designs while adding reconfigurability for in-field bug fixes. The 144-TQFP footprint and JTAG-based configuration align with the legacy ASIC socket pads, allowing PCB-level replacement without re-routing. Engineers can preserve the original schematic and BOM by re-implementing the netlist in VHDL or Verilog and programming the Cyclone bitstream through a standard EPCS1 serial flash, drastically reducing end-of-life redesign risk.
추천
Soft-Core Processor Implementation (Nios II)
The EP1C6T144C6N is a well-known platform for embedding the Nios II 32-bit RISC soft-core, which uses roughly 600-1,800 logic elements depending on the variant. This leaves the remaining logic elements for peripheral timers, UARTs, SPI controllers, and custom accelerators, while 92,160 bits of embedded RAM serve as data and instruction cache. The two PLLs generate CPU clocks from external crystals and peripheral clocks from a single reference, and the 98 user I/O pins map to parallel memory and external peripherals. For education, prototyping, and low-volume embedded systems, the EP1C6 delivers a programmable 32-bit platform at FPGA unit cost.
추천
Test and Measurement Front Ends
In test and measurement instruments, the EP1C6T144C6N provides flexible waveform generation, custom trigger logic, and data acquisition timing. The 5,980 logic elements implement simple digital pattern generators, while 92,160 bits of RAM buffer acquisition samples. Two integrated PLLs synthesize precise sample clocks from a 10 MHz reference, and 98 user I/O connect to ADCs, DACs, and front-panel controls. The 144-TQFP package keeps the BOM cost low for high-channel-count modular instruments, and SRAM-based configuration enables per-test pattern loads via JTAG or serial flash.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1C6T144C6N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1C6T144C8N | EP1C6T144I7N | EP1C6T144C6 | EP1C6T14417N | EP1C3T144C8N |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 144-pin TQFP | 144-pin TQFP - same | 144-pin TQFP - same | 144-pin TQFP - same | 144-pin TQFP - same | 144-pin TQFP - same |
| Logic Elements | 5,980 | 5,980 (same die) | 5,980 (same die) | 5,980 (same die) | 5,980 (same die) | 2,910 (-51%) |
| Embedded RAM (bits) | 92,160 | 92,160 | 92,160 | 92,160 | 92,160 | 58,416 (-37%) |
| Maximum User I/O | 98 | 98 | 98 | 98 | 98 | 104 (+6%) |
| Speed Grade | -6 | -8 (faster) | -7 | -6 (same) | -7 | -8 (faster) |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C (commercial) | -40C to +100C (industrial) | 0C to +85C (commercial) | 0C to +85C (commercial) | 0C to +85C (commercial) |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Maximum Internal Frequency | 405.2 MHz | Higher (~450 MHz) | ~430 MHz | 405.2 MHz (same) | ~430 MHz | ~420 MHz |
| Pin-to-Pin Drop-In | Reference | Yes - direct drop-in | Yes - direct drop-in | Yes - direct drop-in | Yes - direct drop-in | Yes - drop-in (smaller die) |
주요 차별점
- Higher logic density than EP1C3 within the same 144-TQFP (vs EP1C3T144C8N)
- Industrial temperature variant available on same 144-TQFP (vs EP1C6T144I7N)
- Same 144-TQFP with -8 (faster) speed grade available (vs EP1C6T144C8N)
설계 노트
The EP1C6T144C6N requires a clean 1.5V core supply (VCCINT) plus per-bank VCCIO rails. Estimate dynamic current roughly at ICCINT ~= 0.5-1 mA per MHz times utilization, plus I/O current scaled by toggle rate. Place at least one 100 uF bulk plus four 0.1 uF high-frequency ceramics near the TQFP pins. Each PLL needs an isolated VCC_PLL filter (ferrite bead + 10 uF + 0.1 uF) per Altera's Cyclone PowerPlay guidance.
Although the 144-TQFP is a plastic package with 0.5 mm lead pitch, route differential pairs and clock nets on the top layer with a continuous ground plane beneath. Use 8-12 mil traces between TQFP pads and vias-in-pad for clean escapes. Keep JTAG signals (TCK, TMS, TDI, TDO, nCONFIG, nSTATUS, CONF_DONE, DCLK) on dedicated short routes; loop-through is mandatory for multi-device chains.
Estimated: total power with all 5,980 LEs at 50% toggle rate and 100 MHz clock approximates 0.5-1 W. With TQFP thermal resistance around 35 C/W theta_JA on a 4-layer JEDEC board, junction temperature rises 18-35 C above ambient. Always simulate with Quartus PowerPlay before locking the BOM. Failure to include an external configuration device (EPCS1/EPCS4) causes the FPGA to remain in reset at power-up.
규정 준수 정보
RoHS compliant per Arrow EU RoHS listing. Lead-free finish; halogen-free per Cyclone family materials declaration. AEC-Q100 is not applicable for FPGAs (commercial/programmable logic).
