EPM570GF256C5N - 570 LEs MAX II CPLD 5.4ns 256-FBGA | Intel
부품 번호: EPM570GF256C5N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $27.33 | $27.33 |
| 10 | $25.1 | $251.00 |
| 100 | $22.4 | $2,240.00 |
| 500 | $19.85 | $9,925.00 |
| 1,000 | $17.95 | $17,950.00 |
EPM570GF256C5N 개요
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits in the hierarchy between simple PLDs (PALs/GALs) and FPGAs. It is characterized by coarse-grained macrocell architecture, deterministic timing (fixed pin-to-pin delays), and instant-on behavior from internal Flash configuration memory. Within the broader taxonomy, CPLDs belong to programmable logic devices -> logic ICs -> integrated circuits -> semiconductors. The MAX II family from Intel/Altera pioneered low-power, low-cost CPLDs targeting glue-logic, bus bridging, I/O expansion, and power-up sequencing tasks that previously required discrete logic or small FPGAs.
Key features of the EPM570GF256C5N include a 5.4 ns tPD (fastest speed grade), 304 MHz fMAX, 8 Kbits of user Flash memory (UFM), 3.3 V core operation with multi-voltage I/O support (1.5 V, 1.8 V, 2.5 V, 3.3 V LVCMOS/LVTTL), and IEEE 1149.1 JTAG boundary-scan support. The 256-ball FineLine BGA measures 17 mm x 17 mm with 1 mm ball pitch, allowing vertical migration with the EPM1270 and EPM2210 in the same footprint.
The architecture uses a MultiVolt core, MultiTrack interconnect, and four logic array blocks (LABs), each containing 16 macrocells. Per the datasheet, the I/O structure supports slew-rate control, bus-hold, and pull-up resistors, which simplifies board design by eliminating external termination in many cases. The UFM block can store user data such as serial numbers, lookup tables, or boot parameters.
Typical applications include bus-bridging logic (e.g., I²C-to-SPI, PCIe-to-Local bus), power-sequencer controllers for multi-rail systems, I/O expansion for microcontrollers and ASICs, LED display drivers, and industrial glue-logic replacement. The wide operating temperature range (-40 °C to +125 °C industrial grade) makes it suitable for automotive, industrial, and aerospace designs.
When designing with this device, place four 0.1 µF + 1 µF decoupling capacitors near each VCCIO/VCCINT ball cluster, and respect the 1 mm BGA pitch during PCB layout. Use the Quartus II or Intel Quartus Prime programmer to load the program via JTAG; the device supports ISP without external boot memory.
This page synthesizes distributor pricing, drop-in MAX II alternatives in the same 256-FBGA footprint, and practical design notes not consolidated in any single manufacturer document.
드롭인 대체품: EPM570GF256C5N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM570GF256C5N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Process Technology, Operating Temperature, Programming Interface, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM570GF256C5
✅ 드롭인✓ 재고 있음
$18.95 / 개
데이터시트 보기 →EPM570GF256C4N
✅ 드롭인✓ 재고 있음
$9.45 / 개
데이터시트 보기 →EPM570GF256C3N
✅ 드롭인✓ 재고 있음
$9.4 / 개
데이터시트 보기 →EPM1270GF256C5N
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EPM2210GF256C5N
✅ 드롭인✓ 재고 있음
$11.2 / 개
데이터시트 보기 →EPM570F256C5N
✅ 드롭인✓ 재고 있음
$17.03 / 개
데이터시트 보기 →EPM570GF256C5N 최대 정격 & 전기적 특성
| Device Family | MAX II |
| Logic Elements | 570 |
| Macrocells | 440 |
| Maximum User I/Os | 212 |
| Pin-to-Pin Delay (tPD) | 5.4 ns |
| Maximum Frequency (fMAX) | 304 MHz |
| User Flash Memory (UFM) | 8 Kbits |
| Operating Voltage (VCCINT) | 3.3 V |
| I/O Voltage Support (VCCIO) | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| 패키지 | 256-ball FineLine BGA (17 x 17 mm, 1.0 mm pitch) |
| Process Technology | 0.18 µm Flash-based CMOS |
| Configuration Method | Non-volatile, instant-on (Flash) |
| Programming Interface | JTAG (IEEE 1149.1) / ISP |
| 동작 온도 | -40 °C to +125 °C (Industrial) |
| Lead-Free / RoHS | Yes (Lead-free finish) |
EPM570GF256C5N 256-ball fineline bga (17 x 17 mm, 1.0 mm pitch) 핀 구성 가이드
EPM570GF256C5N(256-ball fineline bga (17 x 17 mm, 1.0 mm pitch) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EPM570GF256C5N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EPM570GF256C5N 적합 용도: 6 애플리케이션s: Bus-Bridging Logic (I²C/SPI/UART to Parallel), Power-Sequencing Controller for Multi-Rail Systems, Microcontroller I/O Expansion, Industrial Glue-Logic Replacement, LED Display and Signage Driver, Automotive Body and Chassis Control.
Bus-Bridging Logic (I²C/SPI/UART to Parallel)
The EPM570GF256C5N's deterministic 5.4 ns tPD and instant-on Flash make it ideal for bridging asynchronous serial buses to parallel processor interfaces. With 570 logic elements and 212 user I/Os, the device can multiplex multiple SPI slaves, convert I²C to SPI, or fan-out a UART to several MCUs without external glue logic. Its 3.3 V core with multi-voltage VCCIO (1.5/1.8/2.5/3.3 V) eliminates level shifters when bridging a 1.8 V application processor to legacy 3.3 V peripherals. Programmable via JTAG, the design can be revised in-system without replacing the CPLD.
추천
Power-Sequencing Controller for Multi-Rail Systems
The EPM570GF256C5N delivers deterministic timing and instant-on configuration critical for power-sequencing controllers in multi-rail SoC, FPGA, and ASIC power systems. Using the 5.4 ns tPD to drive enable pins of buck regulators, the CPLD can stagger 0.8 V core, 1.8 V analog, and 3.3 V I/O rails with microsecond-level resolution. Its non-volatile Flash eliminates boot-FPGA configuration dependency, and the 8 Kbit UFM can store trim values for rail voltages or fault thresholds. Industrial temperature range (-40 °C to +125 °C) supports server, telecom, and automotive power designs.
추천
Microcontroller I/O Expansion
When a microcontroller runs out of GPIO, the EPM570GF256C5N provides 212 additional user I/Os in a single 17 x 17 mm BGA, accessible via SPI or parallel bus. Each macrocell can be configured as input, output, or bidirectional with programmable pull-ups, slew-rate control, and bus-hold - matching or exceeding MCU GPIO features. The 5.4 ns tPD enables high-speed expansion for displays, keypads, or motor-control PWMs. Multi-voltage VCCIO banks (1.5/1.8/2.5/3.3 V) let one CPLD expand into mixed-voltage subsystems without external translation.
추천
Industrial Glue-Logic Replacement
The EPM570GF256C5N replaces dozens of 74-series TTL/CMOS glue-logic gates (ANDs, ORs, flip-flops, muxes, counters) with a single programmable device. Designers can revise logic via JTAG during development and lock the design by setting the Flash security bit. With 440 macrocells and 5.4 ns tPD, the CPLD delivers TTL-equivalent or faster performance while reducing board area, BOM count, and inventory. Industrial-grade operation to +125 °C suits factory automation, motor drives, and process control.
추천
LED Display and Signage Driver
The EPM570GF256C5N drives multiplexed LED matrix displays, scrolling signs, and DMX-controlled lighting fixtures. Its 212 user I/Os and 5.4 ns tPD enable high-refresh-rate multiplexing (1:8 to 1:16 scan) of large LED matrices without flicker. The 304 MHz fMAX supports fast PWM generation for color-mixing dimming. JTAG in-system programming allows designers to update animation patterns in deployed signage without removing the CPLD. Wide VCCIO tolerance lets the same CPLD drive 3.3 V and 5 V LED driver chains.
추천
Automotive Body and Chassis Control
The EPM570GF256C5N's -40 °C to +125 °C industrial temperature range and instant-on Flash make it suitable for automotive body controllers, HVAC modules, and chassis subsystems requiring deterministic glue logic. With 570 logic elements it can debounce switches, drive relays and H-bridges, multiplex CAN/LIN transceivers, and supervise watchdog timers. The non-volatile Flash eliminates the boot delay of SRAM-based FPGAs and ensures the controller is operational within microseconds of power-up, which is critical for airbag, ABS, and sensor-fusion applications.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM570GF256C5N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM570GF256C5 | EPM570GF256C4N | EPM1270GF256C5N | EPM2210GF256C5N |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | 256-FBGA (17 x 17 mm) | 256-FBGA (17 x 17 mm) - same | 256-FBGA (17 x 17 mm) - same | 256-FBGA (17 x 17 mm) - same | 256-FBGA (17 x 17 mm) - same |
| Logic Elements | 570 | 570 | 570 | 1270 | 2210 |
| Macrocells | 440 | 440 | 440 | 980 | 1700 |
| User I/Os | 212 | 212 | 212 | 212 | 212 |
| tPD (Speed Grade) | 5.4 ns (C5) | 5.4 ns (C5) | 7.5 ns (C4) | 6.2 ns (C5) | 7.0 ns (C5) |
| UFM Size | 8 Kbit | 8 Kbit | 8 Kbit | 8 Kbit | 8 Kbit |
| Operating Temperature | -40 °C to +125 °C | -40 °C to +85 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
주요 차별점
- Highest speed grade in 256-FBGA footprint (vs EPM570GF256C4N)
- Vertical migration headroom in same package (vs EPM1270GF256C5N)
- Non-volatile instant-on Flash configuration (vs SRAM-based small FPGAs)
설계 노트
Place a 0.1 µF X7R decoupling capacitor within 5 mm of every VCCINT ball cluster and a 1 µF bulk capacitor within 25 mm. For the four VCCIO banks (each bank has its own balls), add one 0.1 µF + 1 µF pair per bank. The 1.0 mm BGA pitch demands 4-layer or 6-layer PCB with microvia-in-pad or dog-bone fan-out; route signals on inner layers to escape the BGA field. Estimate (assumes standard JEDEC four-plane stackup): controlled-impedance traces must match 50 Ω single-ended / 90 Ω differential per MAX II Device Handbook recommendations.
Estimated: the EPM570GF256C5N dissipates approximately 0.3-0.5 W typical quiescent plus dynamic power at 304 MHz. With θJA ≈ 25-30 °C/W on a JEDEC 4-layer test board (per Altera packaging thermal data), junction temperature rise above ambient stays well below 15 °C - no heatsink required. Forced-air cooling is unnecessary for normal operation; however, in sealed enclosures above 70 °C ambient, monitor VCCINT current via the JTAG IDCODE readback to detect thermal runaway.
Do not leave JTAG pins (TCK, TMS, TDI, TDO) floating; add 10 kΩ pull-ups to VCCIO_BANK1 or downstream-driver buffer to prevent spurious configuration. When migrating from a 100-TQFP EPM570 to the 256-FBGA EPM570GF256C5N, remember that VCCIO bank counts and assignments differ between packages - re-validate pin assignments in the Quartus pin-planner before board layout. Finally, the Flash security bit, once set, cannot be erased; keep an unprogrammed copy for future revisions.
규정 준수 정보
RoHS-compliant lead-free finish per Altera/Intel product page (N suffix). AEC-Q100 not qualified - the MAX II family is not AEC-Q100 certified; contact Intel for AEC-Q100 equivalents if required. REACH compliance per EU distributor listings.
