BTG7003A1EPWXUMA2 vs BTG70902EPLXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTG7003A1EPWXUMA2 disebabkan oleh Infineon dan BTG70902EPLXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ AktifInfineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktifPengandingan Spesifikasi
| Parametr | BTG7003A1EPWXUMA2 | BTG70902EPLXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Switch Type | High-Side Power Switch | — |
| Number of Channels | 1 | 1 |
| Configuration | 1:1 N-Channel | — |
| Maximum Continuous Load Current | 15.7 A | — |
| Operating Voltage Range | 6 V to 18 V | [DATA_NEEDED: Vbb operating range min/max] |
| Load Dump Tolerance | 40 V | — |
| Idle Mode Quiescent Current | 50 µA | — |
| On-Resistance R_DS(on) | 10 mΩ (typ) | — |
| Control Input | Active High | — |
| Wire Protection | Integrated I²t | — |
| Functional Safety | ISO 26262 compliant | — |
| Kemasan | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14 (exposed pad) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Suhu Operasi | -40C to +150C (TJ) | — |
| Status RoHS | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| Fungsi | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| Konfigurasi Output | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Had Arus | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Suhu Hubungan Operasi | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| Aras MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |