BTG7003A1EPWXUMA2 vs BTG70902EPLXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTG7003A1EPWXUMA2 tarafından Infineon ve BTG70902EPLXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ AktifInfineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktifÖzellik Karşılaştırması
| Parametre | BTG7003A1EPWXUMA2 | BTG70902EPLXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Switch Type | High-Side Power Switch | — |
| Number of Channels | 1 | 1 |
| Configuration | 1:1 N-Channel | — |
| Maximum Continuous Load Current | 15.7 A | — |
| Operating Voltage Range | 6 V to 18 V | [DATA_NEEDED: Vbb operating range min/max] |
| Load Dump Tolerance | 40 V | — |
| Idle Mode Quiescent Current | 50 µA | — |
| On-Resistance R_DS(on) | 10 mΩ (typ) | — |
| Control Input | Active High | — |
| Wire Protection | Integrated I²t | — |
| Functional Safety | ISO 26262 compliant | — |
| Paket | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14 (exposed pad) |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı | -40C to +150C (TJ) | — |
| RoHS Durumu | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| Fonksiyon | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| Çıkış Konfigürasyonu | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Akım Sınırı | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| İşletim Jant Sıcaklığı | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| MSL Seviyesi | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |