BTG7003A1EPWXUMA2 vs BTG70902EPLXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng BTG7003A1EPWXUMA2 sa pamamagitan ng Infineon at BTG70902EPLXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ NakahandaInfineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | BTG7003A1EPWXUMA2 | BTG70902EPLXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Switch Type | High-Side Power Switch | — |
| Number of Channels | 1 | 1 |
| Configuration | 1:1 N-Channel | — |
| Maximum Continuous Load Current | 15.7 A | — |
| Operating Voltage Range | 6 V to 18 V | [DATA_NEEDED: Vbb operating range min/max] |
| Load Dump Tolerance | 40 V | — |
| Idle Mode Quiescent Current | 50 µA | — |
| On-Resistance R_DS(on) | 10 mΩ (typ) | — |
| Control Input | Active High | — |
| Wire Protection | Integrated I²t | — |
| Functional Safety | ISO 26262 compliant | — |
| Packhaging | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14 (exposed pad) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Temperature na Operasyon | -40C to +150C (TJ) | — |
| Tindminan RoHS | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| Fungsi | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| Output Kumpigurasyon | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Limit ng Current | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Temperature ng Junction na Operasyon | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| Level ng MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |