BTG7003A1EPWXUMA2 vs BTG70902EPLXUMA1 比較
詳細並排比較 BTG7003A1EPWXUMA2 由 Infineon 與 BTG70902EPLXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ 啟用中Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ 啟用中規格比較
| 參數 | BTG7003A1EPWXUMA2 | BTG70902EPLXUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Switch Type | High-Side Power Switch | — |
| Number of Channels | 1 | 1 |
| Configuration | 1:1 N-Channel | — |
| Maximum Continuous Load Current | 15.7 A | — |
| Operating Voltage Range | 6 V to 18 V | [DATA_NEEDED: Vbb operating range min/max] |
| Load Dump Tolerance | 40 V | — |
| Idle Mode Quiescent Current | 50 µA | — |
| On-Resistance R_DS(on) | 10 mΩ (typ) | — |
| Control Input | Active High | — |
| Wire Protection | Integrated I²t | — |
| Functional Safety | ISO 26262 compliant | — |
| 封裝 | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14 (exposed pad) |
| 安裝類型 | Surface Mount | Surface Mount |
| 工作溫度 | -40C to +150C (TJ) | — |
| RoHS 狀態 | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| 功能 | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| 輸出配置 | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| 電流限制 | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| 工作接面溫度 | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| MSL 等級 | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |