MCF54410CMF250 - 250MHz 32-Bit ROMless MCU | NXP
MPN: MCF54410CMF250 ✗ End of LifeMCF54410CMF250 Overview
A microcontroller is a programmable system-on-chip that integrates a processor core, memory interfaces, peripherals, and control logic. The MCF54410 belongs to the broader ColdFire microprocessor family and combines microcontroller integration with microprocessor-class performance. Its ROMless architecture means application code and boot software must be supplied through external memory rather than an internal program ROM.
The verified product listing identifies the device as a 32-bit ColdFire V4 microcontroller with a 250 MHz operating frequency and a 196-mapBGA package. It also identifies the device as ROMless. These characteristics make it relevant to industrial networking, embedded communications, protocol conversion, and control systems that require substantial processing capability and external program storage.
Compared with smaller 8-bit or 16-bit microcontrollers, a 32-bit ColdFire processor provides a wider architectural address space and greater suitability for complex networking stacks, protocol processing, and supervisory control tasks. The 250 MHz rating supports computationally intensive embedded workloads, while the ROMless configuration allows firmware revisions, boot selection, and memory sizing to remain flexible at board level.
Typical application evaluation should begin with power rails, clocking, external memory interfaces, Ethernet or serial connectivity, and the mechanical requirements of the MAPBGA land pattern. Because this is a high-pin-count BGA device, assembly and inspection require compatible PCB design rules, thermal management, and manufacturing capability. The package is reported as approximately 15 x 15 mm in distributor data, although the exact mechanical drawing and all electrical limits must be confirmed from the manufacturer datasheet.
The MCF5441x family is associated with industrial network-connected applications and includes integrated analog, Ethernet-related, and other MCU peripherals according to the supplied NXP family result. Engineers should verify pin multiplexing, memory compatibility, voltage requirements, and firmware support against the MCF5441x datasheet and reference manual before releasing a design.
This page consolidates verified distributor identification, package data, lifecycle-related sourcing context, and design cautions. It does not infer electrical specifications that are absent from the supplied sources; unavailable parameters are explicitly marked for follow-up.
Drop-in alternatives for MCF54410CMF250 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
MCF54418CMJ250
✅ Drop-In📋 Reference alternative (not in catalog)
MCF5481CZP166
✅ Drop-In📋 Reference alternative (not in catalog)
MCF54410CMF250
✅ Drop-InContact for price
View Datasheet →MCF54418CMJ250
✅ Drop-In📋 Reference alternative (not in catalog)
MCF5481CZP166
✅ Drop-In📋 Reference alternative (not in catalog)
MCF54410CMF250 Maximum Ratings & Electrical Characteristics
| Product Type | 32-bit ColdFire V4 microcontroller |
| Operating Frequency | 250 MHz |
| Program Memory | ROMless |
| Processor Architecture | 32-bit ColdFire V4 |
| Package | 196-MAPBGA |
| Package Size | 15 x 15 mm |
| Pin Count | 196 pins |
| Manufacturer | Freescale Semiconductor, now NXP Semiconductors |
| Core | ColdFire V4 |
| Memory Configuration | External memory required |
| Applications | Network-connected industrial applications |
| Integrated Analog | Present in the MCF5441x family |
| Ethernet Support | Dual Ethernet indicated for the MCF5441x family |
| L2 Switch | Integrated in the MCF5441x family |
| RTOS Support | Freescale MQX RTOS indicated for the MCF5441x family |
| RoHS Status | Reported as ROHS compliant by DigChip |
| Mounting Type | Surface-mount BGA |
MCF54410CMF250 15 x 15 mm Pin Configuration Guide
Pin configuration for MCF54410CMF250 (15 x 15 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for MCF54410CMF250.
Refer to the datasheet for full pin configuration.
Typical Applications
MCF54410CMF250 is suitable for 6 applications: Industrial Ethernet Control, Network Protocol Gateway, Industrial Data Acquisition, Embedded Linux Platform, Protocol Conversion Equipment, Embedded System Control Node.
Industrial Ethernet Control
The MCF54410CMF250 fits industrial Ethernet control when a system needs a 32-bit ColdFire V4 processor operating at 250 MHz with external memory for firmware and configuration. The verified MCF5441x family result identifies network-connected industrial applications, an L2 switch, and dual Ethernet capability. In a controller, the processor could manage protocol traffic, supervisory logic, and real-time control tasks while external memory holds application code. The exact PHY, connector, Ethernet electrical requirements, operating temperature, and certification must be verified before design release.
Recommended
Network Protocol Gateway
The 250 MHz ColdFire V4 core and 32-bit architecture make the MCF54410CMF250 a candidate for a gateway that translates between embedded serial or network interfaces. Its ROMless architecture allows application firmware and protocol tables to reside in external memory, supporting field-update and configuration strategies. The processor performance can help handle protocol encapsulation and management tasks, but the exact peripheral set, bus timing, and memory controller must be checked in the MCF5441x datasheet. Software support for the selected protocol stack is also essential.
Recommended
Industrial Data Acquisition
For industrial data acquisition, the MCF54410CMF250 can serve as a high-performance supervisory processor that collects data from serial, Ethernet, or custom peripherals and performs local processing. The 32-bit ColdFire V4 core at 250 MHz provides substantially more processing headroom than a basic low-end MCU, while external memory accommodates a larger acquisition application. Designers must budget for external memory routing, deterministic interrupt handling, analog-interface requirements, and thermal performance. The supplied data does not identify the exact ADC or I/O resources, so those functions require direct datasheet verification.
Recommended
Embedded Linux Platform
The MCF54410CMF250 may be evaluated for embedded networking platforms requiring a 32-bit processor, external program storage, and a high-performance ColdFire core. The supplied family result mentions Freescale MQX RTOS support, while the target listing identifies a ROMless 196-MAPBGA device. This combination can support a structured real-time or embedded-software architecture, provided the memory subsystem, boot mechanism, peripheral drivers, and toolchain are available. It should not be assumed to support every Linux distribution; the exact RTOS and software ecosystem must be confirmed with NXP.
Recommended
Protocol Conversion Equipment
A protocol-conversion product can use the MCF54410CMF250 to manage multiple communication tasks and maintain a stable control loop. Its 250 MHz 32-bit core is appropriate for workloads that combine packet processing, state machines, diagnostics, and local storage. ROMless operation is useful when firmware must be selected or updated through external memory, although it increases hardware complexity compared with an MCU containing internal Flash. The design must verify the available serial controllers, Ethernet interfaces, pin multiplexing, and electrical timing against the MCF5441x documentation.
Recommended
Embedded System Control Node
The MCF54410CMF250 can be considered for an embedded control node that coordinates communications, local logic, and system diagnostics. Its 32-bit ColdFire V4 architecture at 250 MHz provides processing capacity for supervisory functions, while ROMless operation permits implementation-specific boot and application-memory arrangements. A production design needs validated external-memory timing, clocking, reset sequencing, power supplies, and thermal analysis. Because the supplied verified excerpts do not provide the full electrical specification set, these details must be obtained from the manufacturer datasheet and reference manual.
Recommended
Recommended Products Summary
Engineering reference data for MCF54410CMF250 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MCF54418CMJ250 | MCF5481CZP166 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Operating Frequency | 250 MHz | 250 MHz indicated in comparison result | 166 MHz indicated by MPN comparison result |
| — | MCF54410CMF250 | MCF54418CMJ250 | MCF5481CZP166 |
| Application Context | Network-connected industrial applications | Related industrial network processor context | Related ColdFire processor context |
Key Differentiators
- High-frequency 32-bit ColdFire processing (vs MCF5481CZP166)
- Verified ROMless configuration (vs MCF54418CMJ250)
- MCF5441x networking context (vs MCF5481CZP166)
- Large 196-MAPBGA integration (vs MCF54418CMJ250)
Design Notes
Treat the 196-MAPBGA footprint as a controlled manufacturing interface. Use the manufacturer package drawing and land-pattern guidance for ball assignments, solder-mask definition, paste volume, via-in-pad strategy, and assembly inspection. Do not infer the ball map from distributor package names. A DFM review should occur before fabrication because a package-family comparison does not prove that a related ColdFire processor has identical power, ground, clock, memory, or peripheral balls.
Build the power tree only after extracting the exact core, I/O, and analog supply requirements from the MCF5441x datasheet. Separate high-current and sensitive rails where required, place local decoupling at the appropriate supply pins, and validate the power-up and reset sequence with an oscilloscope. The supplied sources identify the processor and package but do not provide voltage values, current limits, sequencing requirements, or regulator recommendations; those values must not be guessed.
Route external memory and high-speed control signals with the shortest practical paths and continuous reference planes. Because the device is ROMless, external memory timing and boot behavior can determine whether the design boots reliably. Check signal-integrity margins using the actual memory, load, topology, and edge rates specified by the datasheet. A cold-chain BGA should also be assessed for power integrity and simultaneous-switching-noise risk.
Do not treat MCF54418CMJ250 or MCF5481CZP166 as drop-in replacements based only on a ColdFire family resemblance. Verify exact pinout, package, voltage, clock, memory controller, Ethernet integration, peripheral multiplexing, boot behavior, and software support. Related processor MPNs can differ in ballout or firmware assumptions, and the supplied cross-reference results do not establish a manufacturer-approved substitution.
Estimate junction temperature from the actual processor dissipation, ambient temperature, package thermal data, PCB copper, and enclosure airflow. The supplied data does not state power dissipation or thermal resistance, so an estimated calculation cannot be performed without those inputs. During bring-up, measure case or board temperature under worst-case traffic and environmental conditions, and confirm that the PCB has adequate thermal spreading around the BGA.
Compliance Information
DigChip reports the part as ROHS compliant. No verified REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification information was supplied. The family is an embedded industrial processor, not an automotive-qualified device based on the available evidence.
