STMicroelectronics

TS3704CD - Quad Micropower CMOS Comparator | STMicroelectronics

MPN: TS3704CD ✗ End of Life
3 V nominal Vdss 9 uA Id 14-SO, 0.154 in (3.90 mm) width Package
MOQ: 1 |

TS3704CD Overview

The STMicroelectronics TS3704CD is a four-channel micropower CMOS voltage comparator with push-pull outputs, supplied in a 14-pin SOIC package. It is designed for low-power signal conditioning and is identified by the manufacturer as an obsolete part. The device accepts a 3 V nominal supply according to distributor product records, operates from 0°C to 70°C in the standard TS3704CD grade, and uses a 35 uA typical comparator current as listed for the closely matched TLC3704CD family.

A voltage comparator is an analog integrated circuit that compares an input voltage with a reference voltage and changes its digital output state when the relationship between the two signals changes. The TS3704CD belongs to the comparator hierarchy: analog mixed-signal IC, voltage comparator, quad comparator, and power-management signal-conditioning IC. Four independent channels in one package can reduce board area and simplify designs requiring several threshold-detection or overvoltage-monitoring functions.

The TS3704CD uses CMOS circuitry to limit consumption and a push-pull output stage to eliminate the external pull-up resistor normally required with open-collector comparators. The four channels share a common supply arrangement within the package, while each comparator provides its own non-inverting and inverting inputs and logic output. This makes the device applicable to threshold crossings, sensor interfaces, signal conditioning, and general-purpose digital logic interfaces.

According to the manufacturer datasheet, the TS3704 is a micropower quad CMOS voltage comparator whose typical current is approximately 9 uA per comparator, while the identified TLC3704 comparison records state 35 uA. Push-pull outputs can drive CMOS-compatible loads directly and transition without the passive pull-up network associated with open-drain comparators. Designers should still check output current, supply voltage, input common-mode range, and output levels for each operating condition before reuse.

Typical uses include battery-powered monitoring, industrial control thresholds, sensor signal conditioning, window comparison, and four-channel level detection. The 14-SO package is suitable for conventional through-hole assembly and prototype boards. Because TS3704CD is obsolete, engineers should use a qualified drop-in option when possible or confirm lifecycle, availability, and qualification requirements for long-term production programs.

For a new PCB, preserve the 14-pin SOIC footprint and verify every signal against the replacement part's pin description. Pay particular attention to input common-mode range, propagation delay, output polarity, supply voltage, and input bias current, since a matching package alone does not guarantee equivalent behavior in every operating condition.

This page consolidates lifecycle information, verified distributor records, pin-compatible migration options, comparison parameters, and practical replacement guidance. The structured alternatives help engineers move away from the obsolete TS3704CD without relying on a mechanically similar but electrically unsuitable part.

Drop-in alternatives for TS3704CD — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

TLC3704CDR

✅ Drop-In
📦 SOIC-14
Same 14-pin SOIC footprint and four-channel comparator function; typical comparator current is 35 uA versus 9 uA for the TS3704 family, a 289% increase.

📋 Reference alternative (not in catalog)

TS3704IDT

✅ Drop-In
📦 SOIC-14
Same STMicroelectronics TS3704 family and 14-SO package; ID grade changes temperature qualification from 0°C to 70°C to an industrial range, while core voltage and timing require verification.

📋 Reference alternative (not in catalog)

TS3V3704IDT

✅ Drop-In
📦 SOIC-14
Same 14-SO quad-comparator format and 9 uA typical current per comparator; supply limits, timing, and output behavior require comparison with the TS3704CD.

📋 Reference alternative (not in catalog)

MAX964EPA

✅ Drop-In
📦 SOIC-14
Cross-brand 14-SO quad comparator identified as a migration path; supply range, common-mode input range, timing, and temperature grade may differ from the TS3704CD.

📋 Reference alternative (not in catalog)

TS3704CD Maximum Ratings & Electrical Characteristics

Comparator Type General-purpose voltage comparator
Number of Channels 4 channels
Logic Family CMOS
Output Style Push-pull
Supply Voltage 3 V nominal
Typical Current per Comparator 9 uA
Comparator Current in Matched TLC3704 Family 35 uA typical
Operating Temperature Range 0°C to 70°C
Package 14-SO, 0.154 in (3.90 mm) width
Mounting Type Surface mount
Lifecycle Status Obsolete
Maximum Power Dissipation 830 mW

TS3704CD 14-so, 0.154 in (3.90 mm) width Pin Configuration Guide

Pin configuration for TS3704CD (14-so, 0.154 in (3.90 mm) width package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

14-so, 0.154 in (3.90 mm) width package pinout diagram for TS3704CD

No detailed pinout data available for TS3704CD.

Refer to the datasheet for full pin configuration.

Typical Applications

TS3704CD is suitable for 6 applications: Battery-Powered Threshold Detection, Industrial Sensor Signal Conditioning, Overvoltage and Undervoltage Protection, Window Comparator for Signal Limits, Smart Sensor Interface Logic, Digital Logic Level Conditioning.

🔋

Battery-Powered Threshold Detection

The TS3704CD fits battery-powered threshold detection because its four CMOS comparator channels consume about 9 uA per comparator according to the manufacturer datasheet. Each channel can compare a sensed voltage against an external reference and produce a push-pull logic result without a continuously active pull-up resistor. This reduces both component count and standby loading in portable monitoring equipment. For a new design, an active TS3V3704IDT or another verified 14-SO option should be evaluated because the original TS3704CD is obsolete. Verify battery operating voltage, comparator common-mode range, and the output leakage required by the connected microcontroller.

🏭

Industrial Sensor Signal Conditioning

The TS3704CD can convert sensor-derived analog voltages into CMOS-compatible threshold decisions for industrial monitoring. Its four channels allow multiple inputs, such as temperature, pressure, or level signals, to be compared against separate references while sharing one 14-SO footprint. The approximately 9 uA typical current per comparator supports low-power sensing nodes, and the push-pull output avoids a static pull-up load. When replacing the obsolete device with TS3704IDT or TS3V3704IDT, check the industrial temperature grade, input common-mode limits, propagation delay, and the complete supply range before production.

⚡

Overvoltage and Undervoltage Protection

Four independent TS3704CD channels can supervise several voltage rails and generate logic flags when an input crosses a programmed threshold. Placing two comparators around a reference can create window monitoring, while individual channels can detect overvoltage or undervoltage on separate supplies. The 3 V nominal device class and low typical consumption suit compact protection subsystems, although actual rail compatibility must be confirmed from the electrical limits. For new designs, use TS3704IDT or TS3V3704IDT when the extended temperature rating is appropriate and confirm input range, output polarity, and startup behavior.

📊

Window Comparator for Signal Limits

The TS3704CD is suitable for implementing upper and lower signal limits with two channels, leaving two channels available for a second monitored signal. A reference divider establishes the threshold, while the comparator output identifies whether the measured voltage lies inside or outside the permitted window. Its push-pull output can connect directly to CMOS-compatible control logic, avoiding the external pull-up required by open-collector devices. A replacement must preserve the same pin assignment and timing behavior; review the TLC3704CDR, TS3704IDT, and MAX964EPA data for common-mode range, propagation delay, and output levels before substitution.

🧩

Smart Sensor Interface Logic

The TS3704CD can perform the first decision stage in a smart-sensor interface by comparing a conditioned analog measurement with a reference before digital conversion or transmission. Four channels permit multiplexing several sensor outputs through one package, reducing PCB footprint in compact IoT and appliance designs. Its CMOS implementation and approximately 9 uA typical consumption per comparator align with low-energy sensing nodes. When replacing it, verify offset voltage, input bias current, common-mode range, and propagation delay, since these specifications determine thresholds near sensor idle levels and the timing of a subsequent digital sample.

🔧

Digital Logic Level Conditioning

A TS3704CD channel can translate a slowly changing or noisy analog condition into a push-pull digital level suitable for downstream CMOS logic. Two complementary comparisons can also generate an above-limit, below-limit, or in-range indication. The push-pull stage avoids the passive pull-up network used with open-collector comparators and supports compact, low-power logic blocks. For replacement qualification, check output high and low levels against the receiving device, confirm the 3 V-class supply compatibility, and test threshold accuracy across temperature. TS3704IDT is appropriate when an industrial-temperature alternative is required.

Recommended Products Summary

TS3V3704IDT Active same-family quad comparator migration option Used in: Battery-Powered Threshold Detection, Smart Sensor Interface Logic TLC3704CDR Low-power quad comparator replacement Used in: Battery-Powered Threshold Detection, Overvoltage and Undervoltage Protection, Window Comparator for Signal Limits, Smart Sensor Interface Logic TS3704IDT Industrial-temperature member of the TS3704 family Used in: Industrial Sensor Signal Conditioning, Overvoltage and Undervoltage Protection, Digital Logic Level Conditioning MAX964EPA Cross-brand 14-SO comparator migration candidate Used in: Industrial Sensor Signal Conditioning, Window Comparator for Signal Limits, Digital Logic Level Conditioning
What is the TS3704CD?
The TS3704CD is an obsolete four-channel micropower CMOS voltage comparator from STMicroelectronics with push-pull outputs in a 14-pin SOIC package. According to the manufacturer datasheet, it combines four independent comparison channels with very low consumption, making it suitable for threshold detection and low-power signal conditioning. The device is intended for designs that use conventional 14-SO assembly and CMOS-compatible logic.
What is the operating voltage of TS3704CD?
The TS3704CD operates from a nominal 3 V supply according to its distributor product record. The manufacturer datasheet should be consulted for the complete minimum and maximum supply ratings, input common-mode limits, and output-level curves. Because the original device is obsolete, verify those limits against the selected replacement before substituting the part in an existing PCB.
Is TS3704CD obsolete?
Yes, the TS3704CD is marked obsolete. The manufacturer datasheet and distributor records identify the original part as a micropower quad voltage comparator, but its lifecycle does not support new long-term production without qualification. For an existing design, use a verified pin-compatible alternative and review electrical differences; for a new design, select an active replacement rather than standardizing on an obsolete MPN.
Where can I download the TS3704CD datasheet PDF?
The TS3704CD manufacturer datasheet is available through the TS3704CD PDF link on this page and through the official STMicroelectronics product documentation channel. The document provides the authoritative pin description, electrical limits, timing information, and application details. Download the document corresponding to TS3704CD rather than assuming that a TS3704CDT packaging code has different electrical characteristics.
Where can I find the TS3704CD pinout?
Use the pin-description table and package drawing in the STMicroelectronics TS3704CD datasheet to identify all 14 pins. The TS3704CD is a 14-SO quad comparator, so each channel provides an inverting input, a non-inverting input, and an output, with common supply pins completing the package. Verify the physical pin numbering and exposed connections on the chosen replacement because different vendors may assign the same functional signals differently.
What can replace the TS3704CD?
The TLC3704CDR is the clearest drop-in migration path identified for the TS3704CD because it is described as a complete replacement with matching terminals and package, and it is available in 14-pin SOIC. The MAX964 family is another stated migration path, but each exact suffix must be checked for package, temperature grade, and supply compatibility. Mechanical fit alone does not establish full electrical equivalence.
Is the TLC3704CDR the same as the TS3704CD?
The TLC3704CDR is pin- and package-compatible with the TS3704CD and is described as a complete replacement in a direct comparison record. It is a four-channel, 35 uA-typical comparator in a 14-pin SOIC package. Final design approval should still compare input common-mode range, supply limits, propagation delay, output levels, and operating temperature because replacement claims do not eliminate these verification steps.
Is TS3704CD suitable for battery-powered applications?
The TS3704CD is suitable in principle for low-power threshold and sensing circuits because its four CMOS comparator channels consume about 9 uA per comparator according to the manufacturer datasheet. The push-pull output also avoids a continuously conducting external pull-up. For battery-powered equipment, calculate the complete system current and confirm that the selected active replacement maintains the required input range and output timing.
What is the best drop-in replacement for TS3704CD?
The TLC3704CDR is the strongest documented drop-in replacement for a standard TS3704CD board because it uses a 14-pin SOIC package and is described as having consistent terminals and functional characteristics. TS3704IDT and TS3V3704IDT are additional same-family migration candidates, while MAX964EPA offers a cross-brand path. Each candidate must be checked for voltage range, timing, logic levels, and temperature coverage before release.
What is the best MAX964 equivalent for TS3704CD?
The MAX964EPA is the relevant 14-pin SOIC member of the MAX964 migration family for a TS3704CD replacement, but it should be treated as a cross-brand migration rather than an automatic identity. Confirm its supply voltage, input common-mode range, output type, propagation delay, and temperature grade against the original circuit. Use the Request a Quote form on this page to ask about availability and lot traceability.
TS3704CD vs TLC3704CDR — which is better for a legacy PCB?
The TLC3704CDR is generally better for maintaining a legacy TS3704CD PCB because it is described as a complete replacement with matching package and terminals. The TS3704CD is obsolete, while the TLC3704 family provides an active migration path. The comparison still requires checking common-mode range, propagation delay, output levels, and temperature because those parameters determine whether a board can be released without modification.
When should I choose TS3704IDT instead of TS3704CD?
Choose TS3704IDT when its industrial temperature grade and electrical limits satisfy the application while preserving the 14-SO footprint. The TS3704IDT belongs to the same STMicroelectronics comparator family and is identified in comparison records with the TS3704CD. It is preferable for designs needing a non-obsolete family option, provided the exact suffix, supply range, and pin behavior are verified.
When should I choose TS3V3704IDT instead of TS3704CD?
Choose TS3V3704IDT when a current STMicroelectronics migration path in the TS3V3704 family provides the required industrial temperature grade and verified 14-SO compatibility. The comparison material identifies it as an alternative to TS3704CD and links its 9 uA-typical-per-comparator micropower architecture. Review all DC and timing parameters in the device documentation before treating it as a functional substitute.
Where can I buy TS3704CD and what is the current lead time?
Use the Request a Quote form on this page to request TS3704CD availability, lot traceability, and the current lead time. Because the MPN is obsolete, stock and delivery timing can vary substantially by remaining inventory and packaging. Do not base a production commitment on a generic listing or assume that any remaining stock has manufacturer-authorized lifecycle status.
How do I design a PCB replacement for an obsolete TS3704CD?
Keep the existing 14-pin SOIC land pattern, then create a pin-by-pin substitution table covering every input, output, supply, and ground connection. Compare the TS3704CD with the TLC3704CDR, TS3704IDT, TS3V3704IDT, or MAX964EPA using supply range, common-mode input range, output levels, timing, and temperature. Prototype the chosen part across voltage, temperature, and expected threshold crossings before production release.

Engineering reference data for TS3704CD — comparison, design guidance, and compliance information.

Selection Guide

Choose TS3704CD only when maintaining an existing legacy PCB is mandatory and remaining inventory can be controlled and qualified. For a new design, favor TS3704IDT or TS3V3704IDT when their industrial temperature ratings, supply limits, and timing meet the design; these options remain within the STMicroelectronics family and preserve the 14-SO footprint. Choose TLC3704CDR when direct terminal and package compatibility is the priority, but account for its stated 35 uA typical comparator current compared with approximately 9 uA per channel for the TS3704 family. Evaluate MAX964EPA when a cross-brand sourcing path is valuable, after checking common-mode range, output levels, delay, and temperature behavior. Regardless of the selected MPN, perform a pin-by-pin PCB audit and temperature- and voltage-corner testing before production release.

Comparison with Alternatives

Parameter This Product TLC3704CDR TS3704IDT TS3V3704IDT MAX964EPA
Brand STMicroelectronics Texas Instruments STMicroelectronics STMicroelectronics Analog Devices
Package SOIC-14 SOIC-14 - same SOIC-14 - same SOIC-14 - same SOIC-14 - same
Number of Channels 4 channels 4 channels 4 channels 4 channels 4 channels

Key Differentiators

  • Lower stated consumption in the original TS3704 family (vs TLC3704CDR)
  • Same-manufacturer migration retains familiar device architecture (vs TS3V3704IDT)
  • Documented terminal and package compatibility (vs TLC3704CDR)
  • Cross-brand sourcing path in the same 14-pin footprint (vs MAX964EPA)

Design Notes

Do not treat a matching 14-SO footprint as proof of electrical compatibility. Build a substitution matrix that compares every input, output, supply, and ground connection, then verify supply limits, input common-mode range, offset voltage, output levels, propagation delay, and temperature grade. Pay particular attention to the TLC3704CDR, whose stated typical comparator current is 35 uA compared with approximately 9 uA per comparator for the TS3704 family. Prototype threshold behavior and startup timing before releasing a replacement to production.

Calculate comparator consumption across all four channels rather than relying on one channel's typical current. For the TS3704 family, the manufacturer datasheet lists approximately 9 uA per comparator, while the TLC3704CDR record lists 35 uA typical. A four-channel system therefore requires separate power-budget calculations for the original and replacement. Include reference-divider current, pull-up leakage, and downstream CMOS input current because those loads can dominate total standby consumption.

Keep each comparator's reference network and protected input close to its associated pins to reduce susceptibility to switching noise and ground bounce. Route the shared supply and ground paths to minimize loop area, place required bypass capacitance near the device, and keep the unused comparator inputs tied to a defined valid level rather than left floating. After substitution, inspect each new pin name against the PCB netlist because equivalent functions may occupy different pins on different manufacturers' quad comparators.

Verify output rise and fall behavior at the actual receiving logic's supply voltage and input capacitance. A push-pull output removes the external pull-up used with open-collector comparators, but transition timing can still matter when driving long PCB traces, cables, or a backplane. Test around the decision threshold with realistic noise and reference drift, and confirm that propagation delay and output-level specifications preserve the system's required response time.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The obsolete TS3704CD product records do not provide a complete current compliance declaration for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict minerals.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

TS3704CD datasheet TS3704CD datasheet pdf TS3704CD pinout TS3704CD replacement TS3704CD equivalent TS3704CD cross reference TS3704CD price TS3704CD stock STMicroelectronics TS3704CD TS3704CD SOIC-14 footprint TS3704CD vs TLC3704CDR TS3704CD battery powered comparator TS3704CD voltage threshold circuit TS3704CD obsolete replacement

Related Components & Terms

STMicroelectronics TS3704CD TS3704IDT TS3V3704IDT TLC3704CDR MAX964EPA Texas Instruments Analog Devices voltage comparator quad comparator analog mixed-signal IC CMOS comparator push-pull output open-collector comparator SOIC-14 surface mount power supply rejection ratio propagation delay input common-mode range battery-powered sensing industrial sensor interface threshold detection window comparison RoHS REACH
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details