XC4VLX25-12SFG363C - 24K Logic Cell FPGA | Xilinx
MPN: XC4VLX25-12SFG363C ✗ End of LifeXC4VLX25-12SFG363C Overview
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. The Virtex-4 LX family belongs to the broader FPGA and CPLD hierarchy within programmable logic devices. Its combination of configurable logic, dedicated block RAM, DSP processing resources, and high-density differential and single-ended I/O makes it useful where a fixed logic device would require extensive redesign.
Key features include 2,688 configurable logic blocks, 24,192 logic cells, 1,296 Kb of block RAM, and 48 DSP slices. The -12 designation identifies the device's performance grade, while the SFG363 suffix identifies the lead-free 363-pin FCBGA configuration used by this part. The commercial temperature rating supports industrial enclosure, test equipment, communications infrastructure, video processing, and embedded control applications where operating conditions remain within the specified junction range.
The Virtex-4 architecture provides programmable logic, RAM, DSP, and I/O resources within one device. At the system level, the FPGA can implement parallel datapaths, protocol bridges, signal processing chains, and control functions while reducing the number of external discrete components. Its 363-pin package also supports high I/O density, but the substantial pin count requires careful escape-routing, via planning, and thermal management on multilayer printed circuit boards.
Typical applications include telecommunications line-card interfaces, industrial automation and control, high-speed data acquisition, defense and aerospace subsystems, broadcast video processing, and embedded test systems. For designs using multiple power rails, careful sequencing is required. For designs migrating from Virtex-4 to a newer FPGA family, PCB changes and design-tool migration may be necessary even when the logical function remains similar.
Place decoupling capacitors close to the power and ground pins, preserve the manufacturer's recommended ball assignments, and route high-speed differential pairs as controlled-impedance nets. Confirm the complete pinout, configuration requirements, clocking limits, and I/O standards against the Virtex-4 packaging and pinout specification before releasing the PCB layout.
This page combines the XC4VLX25-12SFG363C's key architecture, package, qualification, pricing, and lifecycle details with compatible speed-grade considerations, practical PCB guidance, and application-focused comparisons for engineers evaluating this legacy Virtex-4 LX design.
Drop-in alternatives for XC4VLX25-12SFG363C — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC4VLX25-12SFG363C (same form factor and footprint) — differing in Package, Speed Grade, Temperature Grade, Device Type, Logic Cells.
XC4VLX25-10SFG363C
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC4VLX25-11SFG363C
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC4VLX25-12SF363C
✅ Drop-InContact for price
View Datasheet →XC4VLX25-12SFG363CS2
✅ Drop-In📋 Reference alternative (not in catalog)
XC4VLX25-12SFG363C Maximum Ratings & Electrical Characteristics
| Device Type | Virtex-4 LX Field-Programmable Gate Array |
| Logic Cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs |
| Block RAM | 1,296 Kb |
| DSP Slices | 48 slices |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| User I/O Count | 240 I/Os |
| Package | 363-pin FCBGA (SFG363) |
| Package Dimensions | 17 x 17 mm |
| Mounting Type | Surface Mount |
| Speed Grade | -12 |
| Temperature Grade | Commercial, 0 °C to 85 °C junction |
| Lead-Free Status | Pb-free |
XC4VLX25-12SFG363C 17 x 17 mm Pin Configuration Guide
Pin configuration for XC4VLX25-12SFG363C (17 x 17 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC4VLX25-12SFG363C.
Refer to the datasheet for full pin configuration.
Typical Applications
XC4VLX25-12SFG363C is suitable for 6 applications: Telecommunications Line-Card Interface, Industrial Automation and Control, High-Speed Data Acquisition, Video and Image Processing, Aerospace and Defense Subsystem, Embedded Test and Measurement.
Telecommunications Line-Card Interface
The XC4VLX25-12SFG363C fits telecommunications interface equipment requiring parallel logic, embedded buffering, and numerous user I/Os. Its 24,192 logic cells and 1,296 Kb of block RAM can support framing, channelization, protocol conversion, and timing functions, while 48 DSP slices accelerate common filtering and signal-conditioning operations. The 363-pin FCBGA provides the pin density needed for wide parallel buses and differential links. Designers should constrain all interface timing to the -12 device speed grade, implement the recommended clocking structure, and verify differential-pair routing against the Virtex-4 packaging and pinout specification.
Recommended
Industrial Automation and Control
The XC4VLX25-12SFG363C is suitable for industrial controllers that combine deterministic digital logic with substantial sensor and actuator connectivity. The device's 240 I/Os can support parallel digital channels, while its 2,688 configurable logic blocks and 1,296 Kb of block RAM support state machines, protocol handling, event logging, and local data buffering. The commercial 0 °C to 85 °C junction rating must remain compatible with the enclosure's calculated internal temperature. A robust design should include power sequencing, input conditioning, watchdog behavior, and thermal analysis for the 17 x 17 mm FCBGA.
Recommended
High-Speed Data Acquisition
The XC4VLX25-12SFG363C can implement parallelized acquisition, buffering, and processing systems where throughput depends on deterministic logic and internal memory. Its 48 DSP slices support multiply-accumulate operations, while 1,296 Kb of block RAM provides distributed storage for samples, descriptors, and intermediate results. The 240 I/O count allows multiple data buses to be captured in parallel, but input timing, package assignment, and board-level skew determine the usable sample rate. Engineers should use the device pinout specification for banking and voltage compatibility, then close acquisition timing with board-level constraints and worst-case clock skew.
Recommended
Video and Image Processing
The XC4VLX25-12SFG363C supports parallel video pipelines that require configurable logic, line buffers, and DSP-based filtering. Its 1,296 Kb of block RAM can hold multiple line buffers, while 48 DSP slices can implement filters and arithmetic stages. The 240 I/Os provide substantial pixel and control connectivity, and the 363-ball FCBGA supports dense routing on multilayer boards. Practical designs should register video interfaces at the FPGA boundary, use dedicated memory resources predictably, and preserve timing margin under the -12 speed grade. Power and temperature analysis should include sustained pixel-clock activity rather than a low-duty test pattern.
Recommended
Aerospace and Defense Subsystem
The XC4VLX25-12SFG363C can support programmable logic in aerospace, defense, and rugged embedded subsystems when the selected ordering code, temperature grade, screening, and procurement documentation satisfy the program requirements. Its 24,192 logic cells, dedicated block RAM, and 48 DSP slices allow protocol handling, navigation processing, and control functions to share one programmable device. Because the listed ordering code is commercial temperature, it cannot be assumed suitable for an extended-temperature mission without formal qualification. Designers should confirm radiation, temperature, lifecycle, and counterfeit-risk requirements with the manufacturer and approved suppliers before release.
Recommended
Embedded Test and Measurement
The XC4VLX25-12SFG363C is useful in FPGA-based test systems that combine stimulus generation, response capture, pattern processing, and communication logic. Its 240 I/Os enable broad parallel channel access, while 1,296 Kb of block RAM and 48 DSP slices support buffering and numeric processing. The device can also host instrumentation logic alongside a legacy design, reducing external controller requirements. For accurate measurements, engineers must define clock domains, account for input-to-output delay, and use repeatable trigger paths. PCB calibration, power-integrity checks, and thermal monitoring are especially important when many I/O banks operate simultaneously.
Recommended
Recommended Products Summary
Engineering reference data for XC4VLX25-12SFG363C — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC4VLX25-10SFG363C | XC4VLX25-11SFG363C | XC4VLX25-12SF363C | XC4VLX25-12SFG363CS2 |
|---|---|---|---|---|---|
| Package | 363-pin FCBGA (SFG363), 17 x 17 mm | 363-pin FCBGA (SFG363) | 363-pin FCBGA (SFG363) | 363-pin FCBGA (SF363) | 363-pin FCBGA (SFG363) |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Logic Cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs |
| Block RAM | 1,296 Kb | 1,296 Kb | 1,296 Kb | 1,296 Kb | 1,296 Kb |
| DSP Slices | 48 slices | 48 slices | 48 slices | 48 slices | 48 slices |
| User I/O Count | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os |
| Speed Grade | -12 | -10 | -11 | -12 | -12 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Key Differentiators
- Higher speed grade within the identical XC4VLX25 package (vs XC4VLX25-11SFG363C)
- Commercial-temperature ordering with the same device resources (vs XC4VLX25-12SF363C)
- Direct compatibility for existing Virtex-4 LX boards (vs XC4VLX25-10SFG363C)
Design Notes
Plan the 363-pin FCBGA layout from the Xilinx Virtex-4 Packaging and Pinout Specification rather than from a generic BGA library. Preserve the specified power, ground, configuration, clock, and differential I/O ball assignments, and provide unobstructed escape routing for every signal. The 17 x 17 mm footprint should be checked against the controlled mechanical drawing, including ball-pitch, solder-mask, paste, and land-pattern details, before releasing the board files.
Use the manufacturer's recommended decoupling and power-supply arrangement for each voltage rail. Place the smallest effective bypass capacitors directly between the appropriate power and ground balls, retain a low-impedance ground reference, and minimize loop area. The 1.2 V core rail should be analyzed with its worst-case switching and I/O activity; verify startup sequencing, current limit behavior, ripple, and droop in the complete board rather than treating the nominal core voltage as sufficient by itself.
Calculate junction temperature from total power, package thermal characteristics, board copper, airflow, and the maximum ambient temperature. The FCBGA relies heavily on its exposed thermal interface and surrounding board copper for heat removal, so do not define the thermal pad as an unused mechanical feature. Use the Xilinx power and thermal documentation for the selected package, compare estimated and measured junction temperature, and define operational limits for legacy or system-specific thermal solutions.
Apply controlled-impedance routing to every high-speed interface and keep differential pair length and spacing within the values specified for the selected I/O standard. Avoid vias where possible in critical pairs, provide adequate return-path continuity across plane transitions, and add matched footprints for series or external clock conditioning only when the design requires them. Validate eye opening and jitter at the connector or receiver, particularly for legacy systems operating near the -12 speed grade's timing limits.
Do not treat an XC4VLX25 speed-grade change as an automatic drop-in approval. Review the replacement device's temperature grade, lifecycle status, package markings, configuration compatibility, and timing report. Because Virtex-4 supply is mature, also verify manufacturing date, traceability, electrical test results, and whether the device is new, programmed, or reclaimed before incorporating it into a production assembly.
Compliance Information
The product listing identifies the exact MPN as Pb-free. Formal RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified and require confirmation for the specific manufacturing lot.