5CSEBA4U19I7SN - Cyclone V SE SoC FPGA, 40K LE, ARM Cortex-A9 | Intel
N.º da peça: 5CSEBA4U19I7SN ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $215 | $215,00 |
| 10 | $198 | $1.980,00 |
| 100 | $175 | $17.500,00 |
| 500 | $158 | $79.000,00 |
| 1.000 | $145 | $145.000,00 |
5CSEBA4U19I7SN Visão geral
What is an SoC FPGA? An SoC FPGA is a heterogeneous compute device that integrates a microprocessor subsystem (typically ARM Cortex-A) with programmable logic on the same die, connected through high-bandwidth on-chip buses. It belongs to the broader category of programmable logic devices (PLD), which also includes traditional FPGAs, CPLDs, and PALs. SoC FPGAs sit between general-purpose MCUs (which lack parallel logic fabric) and standalone FPGAs (which require external processors for OS-driven tasks), and are commonly used when developers need both hardware acceleration and software flexibility on a single chip.
Key specifications include 40K logic elements, approximately 2,460 Kbits of embedded memory, 66 18x18-bit hardware multipliers, and 2 PLLs supporting a wide range of clocking topologies. The HPS side integrates single-core ARM Cortex-A9 up to 800 MHz, NEON media engine, single/double-precision FPU, L1 caches, 256 KB of shared L2, and a rich set of peripherals (EMAC, USB 2.0 OTG, NAND flash controller, SD/MMC, I2C, SPI, UART). The device also supports DDR2/DDR3/LPDDR2 memory interfaces through the HPS and FPGA fabric, plus PCI Express Gen1 hard IP.
The Cyclone V SE architecture uses TSMC's 28 nm low-power process, which lowers static and dynamic power versus prior Cyclone generations while preserving fabric determinism. Transceiver support varies by sub-variant, and the SE device family emphasizes low-power, transceiver-less operation for cost-sensitive industrial designs. Hard memory controllers and ECC-protected HPS peripherals make the device well suited to safety-critical and functional-safety workflows.
Typical applications include industrial machine vision, factory automation controllers, motor drive and robotics, automotive driver assistance (ADAS), medical imaging, and embedded HMI panels. The combination of ARM Cortex-A9 software ecosystem (Linux, VxWorks, RTOS) and Cyclone V FPGA fabric lets designers implement deterministic hardware acceleration alongside rich OS-level user interfaces.
When designing with this part, allocate FPGA I/O and HPS I/O budget carefully: HPS consumes dedicated pins for DDR and boot flash, leaving the remainder for FPGA fabric and user I/O. Use the Intel Quartus Prime toolchain (Standard or Lite edition) for synthesis, place-and-route, and HPS software development via the SoC EDS.
This page synthesizes distributor pricing, drop-in package-compatible variants, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para 5CSEBA4U19I7SN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 5CSEBA4U19I7SN (mesmo formato e footprint) — diferindo em Package, Logic Elements, Operating Temperature, Process Technology, HPS Maximum Frequency.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
5CSEBA4U19I7S-N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$295.4 / unidade
Ver ficha técnica →5CSEBA4U19I7N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$72 / unidade
Ver ficha técnica →5CSEBA4U19I7LN
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$168 / unidade
Ver ficha técnica →5CSEBA4U19I7
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$24.95 / unidade
Ver ficha técnica →5CSEBA4U19C8SN
✅ Drop-In✓ Em estoque
$44.1 / unidade
Ver ficha técnica →5CSEBA4U19C7SN
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$218 / unidade
Ver ficha técnica →5CSEBA5U19C8SN
✅ Drop-In✓ Em estoque
$162 / unidade
Ver ficha técnica →5CSEBA6U19I7SN
✅ Drop-In✓ Em estoque
$305 / unidade
Ver ficha técnica →5CSEBA4U19I7SN Classificações máximas e características elétricas
| Series | Cyclone V SE SoC FPGA |
| Device Family | Cyclone V |
| Logic Elements | 40,000 |
| Hard Processor System (HPS) | Single ARM Cortex-A9 MPCore with CoreSight |
| HPS Maximum Frequency | 800 MHz |
| Encapsulamento | 484-pin UBG A (19x19 mm) |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40C to +100C (Industrial) |
| Process Node | 28 nm low-power |
| Supply Voltage (Core) | 1.1 V (typical) |
| I/O Standards Supported | LVTTL, LVCMOS, LVDS, SSTL, HSTL (Cyclone V I/O family) |
| Transceivers | Not applicable (SE family, transceiver-less) |
| PCI Express Hard IP | Gen1 capable (rootport/endpoint) |
| DDR Memory Support | DDR2/DDR3/LPDDR2 via HPS and FPGA fabric |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do 5CSEBA4U19I7SN 484-pin ubg a (19x19 mm)
Configuração de pinos para 5CSEBA4U19I7SN (pacote 484-pin ubg a (19x19 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para 5CSEBA4U19I7SN.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
5CSEBA4U19I7SN é adequado para 6 aplicaçãos: Industrial Machine Vision, Motor Drive and Robotics Control, Automotive Driver Assistance (ADAS), Medical Imaging and Diagnostic Equipment, Industrial HMI Panels and Operator Interfaces, Smart Energy and Grid Edge Controllers.
Industrial Machine Vision
The 5CSEBA4U19I7SN fits industrial machine vision because the single-core ARM Cortex-A9 HPS running up to 800 MHz can host a Linux image-processing stack (OpenCV, GStreamer) while the 40K-logic-element FPGA fabric delivers deterministic hardware acceleration for line-scan sensors, Bayer-to-RGB conversion, and real-time object detection. The 28 nm low-power process keeps thermal envelope suitable for sealed IP67 camera enclosures. Placed on a PoE-powered vision board, the HPS Ethernet MAC offloads packet processing; the fabric drives high-bandwidth LVDS sensor interfaces. The Cortex-A9 supports NEON SIMD for per-pixel convolution, while the FPGA fabric implements deterministic ROI pipelines - a hybrid that pure MCUs cannot match.
Recomendado
Motor Drive and Robotics Control
The 5CSEBA4U19I7SN suits multi-axis motor drive and robotics by combining the ARM Cortex-A9 HPS for trajectory planning and EtherCAT master stacks with FPGA fabric running deterministic current/torque control loops at sub-microsecond latency. The HPS includes 32-bit timer blocks and DMA engines that pair with fabric-implemented SVPWM and encoder interfaces. The 484-pin package exposes enough user I/O for 6+ axis drives plus isolated GPIO. Industrial temperature range (-40C to +100C) supports servo cabinet ambient. Compared to MCU-only controllers, this SoC FPGA eliminates external FPGA coprocessors, shrinking the BOM and reducing latency between control law and power-stage PWM generation.
Recomendado
Automotive Driver Assistance (ADAS)
The 5CSEBA4U19I7SN is appropriate for entry-level ADAS perception pre-processing where 40K logic elements handle radar pre-filtering, sensor fusion pre-stage, and CAN-FD message arbitration. The ARM Cortex-A9 HPS hosts an automotive-grade Linux distribution for object classification running alongside fabric-implemented deterministic front-end DSP. The HPS peripheral set (CAN, SPI, I2C, EMAC) maps directly to automotive ECU integration. Industrial temperature operation supports cabin and behind-bumper mounting. Engineers transitioning from discrete MCU + FPGA designs benefit from a single-chip reduction - eliminating FPGA-to-MCU bridges and simplifying PCB layout. Migration to functional-safety variants follows ASIL qualification paths in the Cyclone V family.
Recomendado
Medical Imaging and Diagnostic Equipment
The 5CSEBA4U19I7SN serves medical imaging front-ends such as ultrasound beamformers and patient monitors, where the FPGA fabric delivers deterministic signal conditioning (filtering, decimation, envelope detection) while the ARM Cortex-A9 HPS runs the embedded display stack and network connectivity. Hardware multipliers in the fabric accelerate FIR and FFT operations, and the HPS L2 cache supports smooth 800 MHz processing for real-time waveform rendering. The single-chip integration reduces BOM cost for portable diagnostic carts. Industrial temperature operation is compatible with the regulated medical-device ambient. Compared to discrete DSP + MCU solutions, this SoC FPGA simplifies EMC compliance by removing high-speed inter-chip buses.
Recomendado
Industrial HMI Panels and Operator Interfaces
The 5CSEBA4U19I7SN drives multi-touch industrial HMI panels by allocating the ARM Cortex-A9 HPS to run a Qt/Embedded or web-based HMI application with the FPGA fabric handling TFT/LVDS display timing generation, backlight PWM, and touch-controller I/O. The HPS supports HDMI and 24-bit TTL output through fabric-implemented display controllers, while DDR3 controller drives the frame buffer. Industrial temperature range tolerates factory-floor ambient. Replacing separate HMI SBC plus FPGA timing boards with this single SoC FPGA lowers unit cost and accelerates time-to-market. Engineers can prototype UI on the HPS first, then accelerate critical paths in the FPGA fabric for deterministic response.
Recomendado
Smart Energy and Grid Edge Controllers
The 5CSEBA4U19I7SN is well suited to smart-energy grid edge controllers for substation automation, distributed energy resource (DER) interconnection, and power-quality monitoring. The FPGA fabric implements deterministic IEC 61850 GOOSE message handling and high-speed ADC sampling for power-quality analysis, while the ARM Cortex-A9 HPS runs the communications stack (DNP3, IEC 61850 MMS, Modbus TCP) and local HMI. The HPS EMAC and USB 2.0 OTG connect to substation networks. Industrial temperature operation withstands outdoor cabinet environments. Compared to MCU-based RTUs, this SoC FPGA handles simultaneous high-speed sampling and protocol conversion without bus bottlenecks, simplifying grid-edge hardware design.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 5CSEBA4U19I7SN — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 5CSEBA4U19I7S-N | 5CSEBA4U19I7N | 5CSEBA4U19I7LN | 5CSEBA4U19I7 | 5CSEBA4U19C8SN | 5CSEBA4U19C7SN | 5CSEBA5U19C8SN | 5CSEBA6U19I7SN |
|---|---|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 484-UBGA (19x19) | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same |
| Logic Elements | 40,000 | 40,000 | 40,000 | 40,000 | 40,000 | 40,000 | 40,000 | 85,000 | 110,000 |
| HPS Core | Single ARM Cortex-A9 | Single ARM Cortex-A9 | Single ARM Cortex-A9 | Single ARM Cortex-A9 | Single ARM Cortex-A9 | Single ARM Cortex-A9 | Single ARM Cortex-A9 | Single ARM Cortex-A9 | Dual ARM Cortex-A9 |
| Speed Grade | I7 (industrial, fastest) | I7N | I7N | I7LN (low-power) | I7 | C8 (commercial, fast) | C7 (commercial) | C8 (commercial, fast) | I7 |
| Operating Temperature | -40C to +100C (Industrial) | -40C to +100C | -40C to +100C | -40C to +100C | -40C to +100C | 0C to +85C (Commercial) | 0C to +85C (Commercial) | 0C to +85C (Commercial) | -40C to +100C |
| HPS Max Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 925 MHz |
| Transceivers | None (SE family) | None | None | None | None | None | None | None | None |
Principais diferenciais
- Highest speed grade in 40K LE Cyclone V SE family (vs 5CSEBA4U19C8SN)
- Industrial -40C to +100C temperature range (vs 5CSEBA4U19C8SN)
- Same-footprint density scaling options available (vs 5CSEBA5U19C8SN)
Notas de projeto
Estimated: The Cyclone V SE SoC FPGA at full HPS load (800 MHz) plus high FPGA utilization typically draws 3-5 W total board power. Decouple the HPS core rail (VCC_HPS) with 22 uF + 4.7 uF + 0.1 uF ceramic capacitors placed within 5 mm of the BGA balls, and replicate this on each FPGA core and I/O bank rail. Use a 6-layer PCB with dedicated power and ground planes to keep impedance below target ripple thresholds; refer to the Cyclone V Device Handbook Pin Connection Guidelines for the full decoupling schedule.
Estimated: The 484 UBG A package uses a 1.0 mm ball pitch on a 19x19 mm body - trace fanout requires microvia HDI PCB technology or a 6-layer stackup with buried vias. Plan escape routing before schematic freeze: HPS pins for DDR3/LPDDR2 must reach the SoC EDS reference layout exactly, since trace-length matching is enforced by Quartus Prime during memory controller calibration. Allocate HPS I/O first (DDR, boot flash, JTAG), then assign FPGA user I/O around the remaining balls.
At continuous HPS load and high FPGA utilization, the 484 UBG A package may need a thermal pad or bottom-side heatsink, especially in industrial environments approaching +100C. Estimate thermal resistance theta_JA from the Cyclone V Device Handbook U19 thermal model; if calculated junction temperature exceeds 105C, attach a 15x15 mm copper pad with thermal vias to a 10x10 mm aluminum heatsink. Use a case-to-ambient thermal sensor for thermal-foldback implementation on the HPS side via the Linux thermal subsystem.
Do not leave HPS boot configuration pins floating - tie MSEL[2:0] to the boot mode (typically 010 for NAND flash or 100 for SD/MMC) through 4.7 kohm resistors. Failing to configure MSEL correctly results in no boot or unpredictable boot path. Also confirm the HPS reset (nHPS_RST) and FPGA configuration done (nCONFIG, nSTATUS, CONF_DONE) signals are properly pulled up per the handbook. JTAG pins TCK, TMS, TDI, TDO must each have a 10 kohm pull-up to VCC_POR (3.3 V) for stable boundary-scan operation.
Informações de conformidade
RoHS compliant per Altera/Intel product page. Not AEC-Q100 qualified at the standard part; functional-safety variants are available separately. Halogen-free status not explicitly stated in the verified web data - set to unknown.
