EP1S40F1020C7N - Stratix 41K LE FPGA, 1020-FBGA | Intel
N.º da peça: EP1S40F1020C7N ⚠ Última compra| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $1323.97 | $1.323,97 |
| 10 | $1191.57 | $11.915,70 |
| 100 | $1059.18 | $105.918,00 |
| 500 | $992.98 | $496.490,00 |
| 1.000 | $926.78 | $926.780,00 |
EP1S40F1020C7N Visão geral
An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit whose logic function is defined by the user after manufacturing, consisting of an array of programmable logic elements, configurable I/O blocks, programmable interconnect, and dedicated hardware blocks such as block RAM and DSP multipliers. FPGAs sit in the programmable-logic branch of the broader semiconductor taxonomy (FPGA -> programmable logic -> digital IC -> integrated circuit) and are commonly deployed as hardware accelerators, prototyping platforms, and glue-logic bridges between processors and high-speed peripherals.
Key device features for the EP1S40F1020C7N include 3,423,744 embedded RAM bits distributed across TriMatrix memory blocks, embedded DSP blocks with hardware multipliers, and support for multiple I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and HSTL through dedicated I/O banks. The device includes dedicated high-speed serial interface channels, an internal configuration controller that supports multiple passive and active configuration schemes, and on-chip PLLs for clock management. Maximum internal operating frequency is specified at 420.17 MHz.
Architecturally the Stratix family combines a hierarchical routing fabric with 8-input adaptive look-up tables, fast cluster interconnects, and a row/column structure that supports efficient placement of wide datapaths. The 130 nm process node and 1.5 V core supply keep dynamic power moderate for the era, while the 1020-ball FC-FBGA package provides the I/O density and signal-integrity margin required for high-performance board designs.
Typical applications include telecommunications line cards, DSP co-processing, ASIC prototyping, high-speed serial protocol bridging, and military/aerospace signal processing. The combination of block RAM, embedded multipliers, and high I/O count makes the part particularly well-suited to wide datapath designs and parallel processing.
When designing with this part, ensure the PCB uses controlled-impedance routing for high-speed I/O banks, follow Intel Stratix hardware reference design guidelines for power-plane decoupling, and verify the configuration scheme (PS, AS, JTAG) against the chosen configuration memory density.
This page synthesizes distributor pricing, same-family drop-in alternatives, lifecycle observations, and practical design notes not found in the original Stratix datasheet, providing a single reference for engineers evaluating the EP1S40F1020C7N for new designs or as a long-term replacement target.
Alternativas drop-in para EP1S40F1020C7N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EP1S40F1020C7N (mesmo formato e footprint) — diferindo em Package, Operating Temperature, RoHS Status, Family, Speed Grade.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EP1S40F1020C6N
✅ Drop-In✓ Em estoque
$695 / unidade
Ver ficha técnica →EP1S40F1020C5N
✅ Drop-In✓ Em estoque
$280 / unidade
Ver ficha técnica →EP1S40F1020C6
✅ Drop-In✓ Em estoque
$1380 / unidade
Ver ficha técnica →EP1S40F1020C5
✅ Drop-In✓ Em estoque
$165 / unidade
Ver ficha técnica →EP1S30F1020C7N
✅ Drop-In✓ Em estoque
$215 / unidade
Ver ficha técnica →EP1S30F1020C7
✅ Drop-In✓ Em estoque
$575 / unidade
Ver ficha técnica →EP1S40F1020C7N Classificações máximas e características elétricas
| Family | Stratix |
| Logic Elements | 41,250 |
| Logic Array Blocks (LABs) | 4,125 |
| User I/O Pins | 773 |
| Embedded Memory (bits) | 3,423,744 |
| Supply Voltage (Core) | 1.5 V |
| Maximum Operating Frequency | 420.17 MHz |
| Process Technology | 130 nm CMOS |
| Encapsulamento | 1020-ball FC-FBGA (33 x 33 mm, 1 mm pitch) |
| Faixa de temperatura de operação | 0 C to 85 C (Commercial) |
| I/O Standards Supported | LVDS, LVTTL, LVCMOS, SSTL, HSTL |
| Configuration Schemes | PS, AS, JTAG |
| On-chip PLLs | Yes |
| Tipo de montagem | Surface Mount (BGA) |
| Status RoHS | Compliant (verify on quote) |
Guia de Configuração de Pinos do EP1S40F1020C7N 1020-ball fc-fbga (33 x 33 mm, 1 mm pitch)
Configuração de pinos para EP1S40F1020C7N (pacote 1020-ball fc-fbga (33 x 33 mm, 1 mm pitch)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EP1S40F1020C7N.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EP1S40F1020C7N é adequado para 6 aplicaçãos: Telecommunications Line Card Processing, ASIC Prototyping and Emulation, High-Speed DSP Co-Processing, Industrial High-Speed Data Acquisition, Military and Aerospace Signal Processing, High-Speed Protocol Bridging and Glue Logic.
Telecommunications Line Card Processing
The EP1S40F1020C7N suits telecom line-card designs where 41,250 logic elements and 3.4 Mbit of embedded TriMatrix memory provide parallel packet-processing datapaths without external SRAM. Its 773 user I/O pins support multiple SFI/SPI-like interfaces, while embedded DSP blocks accelerate Viterbi or Reed-Solomon encoding at the 420.17 MHz internal clock. The 1.5 V core and 130 nm node keep power manageable for 10-15 W line-card budgets.
Recomendado
ASIC Prototyping and Emulation
The EP1S40F1020C7N is widely used to prototype multi-million-gate ASIC designs before tape-out because its 41K LE capacity maps cleanly onto partitioned ASIC blocks. The Quartus II flow supports Verilog and VHDL synthesis with timing-driven placement, while the 1020-ball FC-FBGA exposes enough user I/O to bring out wide ASIC buses. The C7 speed grade provides the timing margin needed for accurate worst-case ASIC verification at 420.17 MHz.
Recomendado
High-Speed DSP Co-Processing
The EP1S40F1020C7N's embedded multiplier blocks accelerate fixed-point DSP workloads such as FFTs, FIR filters, and radar pulse compression in radar and signal-intelligence systems. The 3.4 Mbit of embedded memory enables deep sample buffering without external SRAM, and the 420.17 MHz Fmax supports sample rates up to several hundred megasamples per second across parallel channels. The 130 nm process node gives predictable latency for synchronous DSP pipelines.
Recomendado
Industrial High-Speed Data Acquisition
The EP1S40F1020C7N functions as the central processing element in industrial data-acquisition systems, where 773 user I/O pins interface to multiple high-speed ADCs and DACs across LVDS and LVCMOS banks. Embedded block RAM buffers high-rate sample streams before downstream DSP, and on-chip PLLs generate the multiple clock domains needed for synchronous acquisition. The commercial 0-85 C operating range suits most factory-floor enclosures.
Recomendado
Military and Aerospace Signal Processing
The EP1S40F1020C7N's parallel DSP blocks and 41K LE capacity support radar, electronic-warfare, and software-defined-radio subsystems where deterministic latency and on-chip memory are required. Multiple I/O banks enable simultaneous connection to RF ADCs, DACs, and high-speed transceivers while preserving signal integrity. Designers pair the device with companion Stratix-II or radiation-tolerant parts for upgrade paths, using the same 1020-FBGA footprint where possible.
Recomendado
High-Speed Protocol Bridging and Glue Logic
The EP1S40F1020C7N serves as a programmable bridge between heterogeneous processor buses, network PHYs, and storage controllers where fixed ASSPs cannot match the required interface mix. The 773 user I/O pins support many parallel and serial protocols simultaneously, while embedded TriMatrix memory implements FIFOs and translation buffers between clock domains. The 1.5 V core supply and 130 nm node keep system power budgets reasonable for multi-rail platforms.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EP1S40F1020C7N — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EP1S40F1020C6N | EP1S40F1020C5N | EP1S40F1020C6 | EP1S40F1020C5 | EP1S30F1020C7N |
|---|---|---|---|---|---|---|
| Package | 1020-ball FC-FBGA (33 x 33 mm) | 1020-ball FC-FBGA (33 x 33 mm) | 1020-ball FC-FBGA (33 x 33 mm) | 1020-ball FC-FBGA (33 x 33 mm) | 1020-ball FC-FBGA (33 x 33 mm) | 1020-ball FC-FBGA (33 x 33 mm) |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 41,250 | 41,250 | 41,250 | 41,250 | 41,250 | 33,000 |
| Speed Grade | C7 (fastest) | C6 | C5 | C6 | C5 | C7 |
| User I/O Pins | 773 | 773 | 773 | 773 | 773 | 773 |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Operating Temperature | 0 C to 85 C (Commercial) | 0 C to 85 C (Commercial) | 0 C to 85 C (Commercial) | 0 C to 85 C (Commercial) | 0 C to 85 C (Commercial) | 0 C to 85 C (Commercial) |
Principais diferenciais
- Fastest speed grade in the EP1S40F1020 family (vs EP1S40F1020C6N)
- Highest logic capacity in the original Stratix family at 41K LE (vs EP1S30F1020C7N)
- Same pinout across speed grades simplifies BOM management (vs EP1S25F1020C7N)
Notas de projeto
Estimated: at 1.5 V core and 2 A core current, the EP1S40F1020C7N dissipates roughly 3 W internally, plus additional IO bank power; total worst-case package power can reach 8-10 W. Use thermal vias under the 33 x 33 mm FC-FBGA exposed pad to a multilayer copper ground plane. Without a thermal spreader, the 130 nm process die can exceed 100 C junction at 25 C ambient, derating Fmax. Add airflow or a heat spreader for production deployments.
The 1020-ball FC-FBGA at 1.0 mm pitch demands a high-density PCB stackup with microvia or via-in-pad construction; standard 8/8 mil via designs cannot reliably break out the inner balls. Plan for at least 6 PCB layers to provide solid reference planes for the high-speed LVDS and SSTL I/O banks. Follow the Altera Stratix hardware reference design guidelines for power-plane decoupling, placing 0.1 uF and 0.01 uF capacitors within 100 mil of every power pin.
Use controlled-impedance routing (typically 50 ohm single-ended, 100 ohm differential) for all LVDS and SSTL I/O bank traces, with length matching within 25 mil for differential pairs. The 773 user I/O pins are organized into multiple banks, each with its own VCCIO rail; isolate clocks and high-speed buses from switching I/O by dedicating separate banks. Series-termination resistors on LVTTL outputs help reduce overshoot when driving long PCB traces back to companion ASICS.
Do not confuse the EP1S40F1020C7N with the older EP1S40B956 or smaller EP1S25 variants: the 1020-FBGA pinout is unique to the -40F1020 family. Mixing configuration modes (PS, AS, JTAG) without proper MSEL pin strapping can leave the device unconfigured. Verify the configuration memory density (EPCS16, EPCS64, etc.) supports the compressed bitstream size generated by Quartus II for your design before board bring-up.
Informações de conformidade
Compliance status not stated in the verified distributor listings; confirm with the manufacturer or your distributor at quote time. AEC-Q100 is not applicable because the part is a commercial-grade FPGA, not an automotive-qualified IC.