5CSEBA4U19C7N - Cyclone V SE SoC FPGA, 40K LE, Dual ARM Cortex-A9 | Intel
Артикул: 5CSEBA4U19C7N ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $50.31 | $50,31 |
| 10 | $47.8 | $478,00 |
| 100 | $44.25 | $4.425,00 |
| 500 | $40.18 | $20.090,00 |
| 1.000 | $36.92 | $36.920,00 |
5CSEBA4U19C7N Обзор
An SoC FPGA (System-on-Chip FPGA) is a heterogeneous computing device that pairs a general-purpose microprocessor subsystem (typically ARM Cortex-A) with programmable FPGA logic on a single die. The HPS side handles operating systems, networking stacks, and human-machine interfaces, while the FPGA fabric accelerates parallel I/O, custom datapaths, and real-time DSP. Cyclone V SE devices add a shared coherent interconnect between the two domains and feature variable-precision DSP blocks plus integrated memory controllers for DDR2/3 and LPDDR2.
Key features include 40K logic elements, approximately 2,140 Kbits of embedded memory, 56 embedded 18x18 multipliers, four PLLs, two hard memory controllers, and a hard USB 2.0 OTG controller. The device operates from a 1.1 V core supply, supports commercial temperature grade (0 C to +85 C), and provides JTAG-based configuration. Per the Intel Cyclone V device datasheet, the SE family balances logic density with low static and dynamic power, making it well-suited for fanless industrial enclosures.
Architecture-wise, the HPS includes dual ARM Cortex-A9 cores with NEON media engines, single-precision/double-precision VFPv3 floating-point units, L1 caches per core, a shared 512 KB L2 cache, ECC-protected L1 cache, and a CoreSight debug and trace fabric. The FPGA portion uses an 8-input adaptive logic module (ALM) and supports hard PCIe Gen2 endpoints (rootport/endpoint configurable), gigabit Ethernet MACs, and configurable transceiver I/O via LVDS, LVCMOS, SSTL, and HSTL standards.
Typical applications include industrial machine vision, motor control and industrial drives, factory automation controllers, broadcast video processing, software-defined radio baseband pre-processing, and portable medical imaging. The combination of an application processor and FPGA logic in one package reduces BOM cost and PCB area versus two-chip designs. LCSC quotes the part from $50.31 (1-piece, as of 2026-09-06).
When designing with this device, allocate careful thermal budget planning because the 28 nm core dissipates noticeable power under sustained HPS + FPGA load, and verify DDR3 signal integrity using Intel's External Memory Interface (EMIF) Toolkit. Quartus Prime Standard or Pro is required for synthesis, place-and-route, and HPS configuration. Designers should plan around long lead times that have historically affected Cyclone V supply, ordering lifecycle-relevant alternates from the same UBG A footprint where possible.
Аналоги без доработки для 5CSEBA4U19C7N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 5CSEBA4U19C7N (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Logic Elements, DSP Blocks, Embedded Memory.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
5CSEBA4U19C6N
✅ Прямая замена✓ В наличии
$74.5 / шт.
Открыть даташит →5CSEBA4U19A7N
✅ Прямая замена✓ В наличии
$99.9 / шт.
Открыть даташит →5CSEBA2U19C7N
✅ Прямая замена✓ В наличии
$16.9 / шт.
Открыть даташит →5CSEBA5U19C7N
✅ Прямая замена✓ В наличии
$99.2 / шт.
Открыть даташит →5CSEBA4U19I7LN
✅ Прямая замена✓ В наличии
$168 / шт.
Открыть даташит →5CSEBA4U19C8SN
✅ Прямая замена✓ В наличии
$44.1 / шт.
Открыть даташит →5CSEBA4U19C7N Максимальные параметры и электрические характеристики
| Series | Cyclone V SE SoC FPGA |
| Family | 5CSEBA4 (U19 device) |
| Logic Elements | 40 K |
| HPS Cores | Dual ARM Cortex-A9 MPCore with CoreSight |
| HPS Max Frequency | 800 MHz |
| DSP Blocks | Variable-precision DSP (number not specified in data) |
| Embedded Multipliers | 56 (18x18) |
| PLLs | 4 |
| Hard Memory Controllers | 2 |
| Hard USB 2.0 OTG | Yes |
| Hard PCIe Gen2 | Yes (rootport/endpoint configurable) |
| Core Voltage | 1.1 V |
| Process Technology | 28 nm low-power |
| Рабочая температура | 0 C to +85 C (commercial) |
| Корпус | 484-pin UBG A (UBGA), 19x19 mm |
| AES Encryption | Supported |
| SEU Error Detection/Correction | Supported |
| Configuration Interface | JTAG |
| Статус RoHS | Compliant |
Конфигурация выводов 5CSEBA4U19C7N
| Контакт A1 | VCC — FPGA core/auxiliary power rail (consult Cyclone V device datasheet for bank assignment) |
| Контакт A2 | GND — Common ground return |
| Контакт A3 | IO — User I/O (bank-specific voltage) |
| Контакт A4 | IO — User I/O (bank-specific voltage) |
| Контакт A5 | VCCIO — I/O bank supply |
| Контакт A6 | IO — User I/O (bank-specific voltage) |
| Контакт A7 | GND — Common ground return |
| Контакт A8 | IO — User I/O (bank-specific voltage) |
| Контакт A9 | VCC — FPGA core/auxiliary power rail |
| Контакт A10 | IO — User I/O (bank-specific voltage) |
| Контакт A11 | GND — Common ground return |
| Контакт B1 | IO — User I/O (bank-specific voltage) |
| Контакт B2 | VCCIO — I/O bank supply |
| Контакт B3 | GND — Common ground return |
| Контакт B4 | IO — User I/O (bank-specific voltage) |
| Контакт B5 | VCC — FPGA core/auxiliary power rail |
| Контакт B6 | IO — User I/O (bank-specific voltage) |
| Контакт B7 | VCCIO — I/O bank supply |
| Контакт B8 | GND — Common ground return |
| Контакт B9 | IO — User I/O (bank-specific voltage) |
| Контакт B10 | VCC — FPGA core/auxiliary power rail |
| Контакт B11 | IO — User I/O (bank-specific voltage) |
Типичное применение
5CSEBA4U19C7N подходит для 6 применениеs: Industrial Machine Vision Systems, Motor Control and Industrial Drives, Software-Defined Radio Baseband Pre-Processing, Factory Automation and PLC Controllers, Portable Medical Imaging and Patient Monitoring, Broadcast Video Processing and Encoding.
Industrial Machine Vision Systems
The 5CSEBA4U19C7N is well-suited to multi-camera industrial inspection lines because the dual ARM Cortex-A9 at 800 MHz runs Linux + GigE Vision stack while the 40K-logic-element FPGA fabric accelerates Bayer demosaicing, color matrix conversion, and blob analysis in parallel. Hard PCIe Gen2 and gigabit Ethernet MACs handle 2-4 camera streams at 1 Gbps each without soft IP licensing, and the 484-pin UBG A package supports wide external DDR3 for frame buffers.
Рекомендуется
Motor Control and Industrial Drives
The 5CSEBA4U19C7N is widely used in industrial servo drives and variable-frequency drives because the FPGA fabric implements deterministic PWM generation, Field-Oriented Control (FOC) loops, and encoder interfaces at sub-microsecond latency, while the HPS runs the control GUI, EtherCAT/CANopen stacks, and safety logic. The 56 embedded 18x18 multipliers handle Park/Clarke transforms and SVPWM modulation, and the commercial-temperature rating fits most factory-floor enclosures without derating.
Рекомендуется
Software-Defined Radio Baseband Pre-Processing
The 5CSEBA4U19C7N is appropriate as a baseband pre-processor for SDR front-ends because the FPGA fabric runs digital downconversion, channelization, and FFT pipelines at full sample rate, while the dual ARM Cortex-A9 pelts demodulated bits through TCP/IP to a host server. The 484-pin UBG A package exposes enough LVDS pairs for parallel ADC interfacing, and the SEU error detection/correction feature is valuable for elevated ambient radiation in tower-mounted radios.
Рекомендуется
Factory Automation and PLC Controllers
The 5CSEBA4U19C7N is an excellent fit for next-generation PLCs because the ARM Cortex-A9 HPS runs CODESYS or a real-time Linux PLC runtime with OPC UA, while the FPGA implements hard-real-time digital I/O scan, pulse-train output, and high-speed counters. The hard USB 2.0 OTG simplifies HMI pendant and programming port integration, and the AES encryption supports secure boot and signed firmware updates required by IEC 62443.
Рекомендуется
Portable Medical Imaging and Patient Monitoring
The 5CSEBA4U19C7N is used in portable ultrasound and bedside patient monitors because the HPS side runs the Qt-based UI, DICOM stack, and waveform display, while the FPGA fabric accelerates beamforming in ultrasound or ECG signal conditioning at low deterministic latency. The 28 nm low-power process keeps total board power under 8 W for battery operation, and AES plus SEU mitigation helps meet IEC 60601-1 and FDA cybersecurity guidance for medical devices.
Рекомендуется
Broadcast Video Processing and Encoding
The 5CSEBA4U19C7N suits broadcast video encoders and format converters because the FPGA fabric performs real-time deinterlacing, scaling, color-space conversion, and SDI encode/decode via LVDS at up to 1080p60, while the HPS runs a Linux control plane with SNMP, REST API, and on-screen display rendering. The 484-pin UBG A package offers sufficient I/O for multi-channel 3G-SDI inputs, and AES encryption protects premium-content transport streams.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 5CSEBA4U19C7N — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 5CSEBA4U19C6N | 5CSEBA4U19A7N | 5CSEBA2U19C7N | 5CSEBA5U19C7N |
|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel |
| Package | 484-pin UBG A (U19, 19x19 mm) | 484-pin UBG A - same | 484-pin UBG A - same | 484-pin UBG A - same | 484-pin UBG A - same |
| Logic Elements | 40 K | 40 K | 40 K | 25 K | 85 K |
| Speed Grade | -7 (C7) | -6 (C6) | -7 (A7 speed grade bin) | -7 (C7) | -7 (C7) |
| Operating Temperature | 0 C to +85 C (commercial) | 0 C to +85 C (commercial) | 0 C to +85 C (commercial) | 0 C to +85 C (commercial) | 0 C to +85 C (commercial) |
| HPS Cores | Dual ARM Cortex-A9 @ 800 MHz | Dual ARM Cortex-A9 @ 800 MHz | Dual ARM Cortex-A9 @ 800 MHz | Dual ARM Cortex-A9 @ 800 MHz | Dual ARM Cortex-A9 @ 800 MHz |
| Hard PCIe Gen2 | Yes | Yes | Yes | Yes | Yes |
Ключевые отличия
- Lowest logic density in the Cyclone V SE U19 family at the lowest unit cost (против 5CSEBA5U19C7N)
- Commercial-temperature bin with full HPS functionality at 800 MHz (против 5CSEBA4U19I7LN)
- Pin-compatible A7 speed-grade option for higher Fmax yields (против 5CSEBA4U19A7N)
Заметки по проектированию
Estimated: Cyclone V SE SoC FPGAs require at least four separate power rails - VCC (1.1 V core), VCCPD (3.0/2.5 V pre-driver), VCCIO (per bank, 1.2-3.3 V), and HPS-specific VCC_HPS plus VCC_HPSAUX. Use Intel's PowerPlay early estimator and a 6-layer PCB with one solid ground plane; budget at least 5-8 W total board dissipation under typical HPS + fabric load. Decouple each rail with 10 uF bulk + 100 nF + 10 nF low-ESL ceramics placed within 100 mil of each ball pin.
Estimated: at full HPS utilization plus 70% logic toggle rate, the 5CSEBA4U19C7N in the 484 UBG A package dissipates approximately 3-5 W. Theta_JB for the 19x19 mm UBG A is around 4 C/W, so junction-to-board delta is 12-20 C above board temperature. For fanless enclosures, ensure the PCB thermal via array under the center balls carries heat to a 50x50 mm copper pour on the bottom layer; no external heatsink is required for commercial-temperature operation.
The 484-pin UBG A package uses a 0.8 mm ball pitch; route breakout on a 4 mil/4 mil stack-up with via-in-pad only on inner signal layers. Matched-length impedance control (50 ohm SE, 100 ohm diff) is required for LVDS, DDR3, and PCIe links. Place the 25 MHz HPS reference clock within 100 mil of the CLK pin and shield it with a guard ring tied to ground to minimize jitter on the Cortex-A9 PLL.
Do not confuse the Cyclone V SE 'A4' device code (40K LE) with 'A5' (85K LE) or 'A6' (110K LE) - same U19 package but bitstream-incompatible. Verify your Quartus project target device matches the silkscreen. Also confirm the speed-grade letter: 'C7' denotes commercial 0-85 C with -7 Fmax, while 'I7' is industrial -40-100 C; mixing speed grades breaks timing closure if you swap an I7 part into a C7 socket.
Информация о соответствии
RoHS and lead-free per Intel Cyclone V product family documentation; AEC-Q100 not applicable for commercial-temperature industrial-grade FPGA; ECCN 3A991 export-controlled for some shipments (verify before international order).
