A3PE600-FGG484 - ProASIC3E 600K-Gate Flash FPGA | Microchip
Артикул: A3PE600-FGG484 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $89.5 | $89,50 |
| 10 | $80.55 | $805,50 |
| 100 | $71.6 | $7.160,00 |
| 500 | $62.65 | $31.325,00 |
| 1.000 | $53.7 | $53.700,00 |
A3PE600-FGG484 Обзор
A flash-based FPGA is a field-programmable gate array that stores its configuration in on-chip non-volatile flash memory rather than an external configuration device. Within the programmable-logic hierarchy (FPGA -> programmable logic IC -> CMOS digital semiconductor), ProASIC3E occupies the single-chip, reprogrammable segment, offering the live-at-power-up behavior of ASICs with the flexibility of SRAM FPGAs, but without the configuration bootloader or external flash requirement.
Key features include low total cost of ownership through a single-chip solution, 130 nm flash CMOS process technology, reprogrammability for in-field updates, and abundant advanced features such as embedded RAM blocks and high-performance I/O structures. The commercial temperature grading suits cost-sensitive volume applications.
Technically, ProASIC3E combines a Sea-of-Gates-style fabric with VersaTiles (each based on a 3-input lookup structure) and dedicated embedded SRAM blocks. Because configuration data resides in flash, the device is inherently secure against bitstream interception, has zero configuration time at power-up, and offers very low static power consumption compared with SRAM FPGAs of similar density.
Typical applications include industrial automation and motor control, aerospace and defense subsystems, communications bridging, medical instrumentation, and test equipment glue logic, where the 270 available user I/Os and flash persistence simplify board design.
A key design consideration is power supply ordering: with a flash fabric, the 1.5 V core rail should be stable before I/O banks ramp to avoid latch-up risk, and decoupling per the manufacturer power-up guidelines is mandatory. Signal integrity on the 1 mm-pitch FBGA requires careful via escape planning on high-layer-count boards.
This page synthesizes distributor pricing context, drop-in family alternatives, cross-reference information, and practical design notes not found in the manufacturer datasheet, providing a single decision-ready resource for FPGA sourcing engineers.
Аналоги без доработки для A3PE600-FGG484 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с A3PE600-FGG484 (тот же форм-фактор и посадочное место) — отличается по Package, Configuration Memory, Operating Temperature, RoHS Status, Family.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
A3PE600-FGG484I
✅ Прямая замена✓ В наличии
$44.03 / шт.
Открыть даташит →A3PE600-1FGG484
✅ Прямая замена✓ В наличии
$44.9 / шт.
Открыть даташит →A3PE600-FG484M
✅ Прямая замена✓ В наличии
$68.9 / шт.
Открыть даташит →A3PE600L-FGG484M
✅ Прямая замена✓ В наличии
$79.9 / шт.
Открыть даташит →A3PE600L-FG484M
✅ Прямая замена✓ В наличии
$44.9 / шт.
Открыть даташит →A3P600-FGG484
✅ Прямая замена✓ В наличии
$44.75 / шт.
Открыть даташит →A3PE600-FGG484 Максимальные параметры и электрические характеристики
| Family | ProASIC3E |
| System Gates | 600000 |
| Configurable Logic Blocks (CLBs) | 13824 |
| Logic Cells | 13824 |
| Embedded RAM | 110592 bits |
| User I/O | 270 |
| Maximum System Frequency | 350 MHz |
| Supply Voltage (Core) | 1.425 V to 1.575 V |
| Process Technology | 130 nm CMOS flash |
| Configuration Memory | On-chip flash (non-volatile, live at power-up) |
| Корпус | FBGA-484 (PBGA484) |
| Package Dimensions | 23 x 23 mm, 2.23 mm height, 1 mm pitch |
| Terminal Type | Ball (BGA) |
| Способ монтажа | Surface Mount |
| Temperature Grading | Commercial |
| Number of Pins / Balls | 484 |
Руководство по цоколевке A3PE600-FGG484 в корпусе 23 x 23 mm, 2.23 mm height, 1 mm pitch
Цоколевка для A3PE600-FGG484 (корпус 23 x 23 mm, 2.23 mm height, 1 mm pitch). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для A3PE600-FGG484.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
A3PE600-FGG484 подходит для 6 применениеs: Industrial Automation and Motor Control, Aerospace and Defense Subsystems, Communications Bridging and Line Cards, Medical Instrumentation, Test and Measurement Equipment, Secure Embedded Control and IoT Gateways.
Industrial Automation and Motor Control
The A3PE600-FGG484 fits industrial automation because its 270 user I/Os can simultaneously drive multiple PWM channels, interface quadrature encoders, and bridge fieldbus transceivers without external glue logic. Its flash fabric is live within microseconds at power-up, enabling deterministic safety sequencing that SRAM FPGAs cannot match during configuration boot. With 13,824 CLBs and up to 350 MHz system performance, it handles multi-axis PWM generation, current-loop feedback math, and Modbus/CAN bridging in one 23 x 23 mm chip. Designers should place a 10 uF bulk capacitor per I/O bank and follow Microchip power-up sequencing so the 1.5 V core stabilizes before bank voltages ramp, avoiding I/O contention during startup in shared-bus installations.
Рекомендуется
Aerospace and Defense Subsystems
Flash-based ProASIC3E devices are widely used in aerospace and defense because the on-chip flash configuration resists bitstream interception and eliminates external configuration memory - reducing failure points in radiation-sensitive and secure programs. The A3PE600-FGG484 provides 600K gates and 110592 bits of embedded RAM for telemetry framing, sensor fusion preprocessing, and bus protocol bridging (MIL-STD-1553 glue, ARINC interfaces at board level). The live-at-power-up behavior matters for mission sequencing where no configuration delay is acceptable. For extended-temperature programs, the pin-compatible A3PE600-FGG484I should be selected instead of the commercial-graded base part, since both share the identical FBGA-484 footprint and can be swapped with zero PCB or firmware redesign.
Рекомендуется
Communications Bridging and Line Cards
In networking line cards and protocol bridges, the A3PE600-FGG484 maps packet-processing glue logic, status aggregation, and backplane interfacing into one device. The 270 user I/Os support wide parallel buses to PHYs and switch fabrics, while 13,824 CLBs implement state machines for flow control and framing at up to 350 MHz internal performance. Because configuration is stored in flash, line cards enumerate instantly at slot insertion, avoiding the configuration latency of SRAM FPGAs that can stall hot-swap bring-up. Designers should budget embedded RAM carefully at 110592 bits - deep packet buffering belongs in external memory, keeping this device focused on control-plane glue and low-latency datapath stitching where its zero-boot architecture delivers measurable availability gains.
Рекомендуется
Medical Instrumentation
Medical diagnostic devices benefit from the A3PE600-FGG484's deterministic power-up: front-end acquisition boards become functional immediately, and the flash fabric's low static power reduces thermal noise contribution in sensitive analog neighborhoods. The 600K-gate fabric implements trigger logic, decimation filters, and interface translation between ADCs, USB/UART bridges, and display controllers using the 270 I/Os across independently supplied banks supporting 3.3 V, 2.5 V, and 1.8 V signaling. Its reprogrammability supports in-field firmware feature updates and calibration changes without device replacement - important for devices with long service lives and regulatory change cycles. Choose the industrial-grade FGG484I drop-in where equipment must tolerate broad ambient ranges in clinical environments.
Рекомендуется
Test and Measurement Equipment
Bench instruments and automated test fixtures use the A3PE600-FGG484 for timing generation, pattern capture, and host-to-hardware interfacing. The 350 MHz system performance supports high-resolution event timing, while 13,824 CLBs implement pattern generators and comparators spanning up to 270 channels through the FBGA-484 I/O structure. Flash persistence eliminates reconfiguration delays between test sequences, improving throughput in rack-and-stack systems that power-cycle DUTs repeatedly. The 1 mm ball pitch simplifies escape routing to dense connector fields on 6-8 layer boards. For designs needing more capture depth, the pin-compatible A3PE3000L-FGG484 up-migration path requires no footprint change, letting one PCB platform span multiple instrument price points.
Рекомендуется
Secure Embedded Control and IoT Gateways
The A3PE600-FGG484 suits secure embedded controllers where design IP protection matters: ProASIC3E flash configuration cannot be read back as a bitstream in the way SRAM FPGA data can during boot, raising the bar against design cloning. A gateway application typically uses 13,824 CLBs for sensor aggregation, custom serial protocols, and security state machines, with 110592 bits of embedded RAM for FIFO buffering between heterogeneous interfaces. Zero-configuration power-up means watchdog and safety interlock logic is active before a host microcontroller completes its own boot, enabling layered supervision. The 1.5 V core keeps static power low for always-on nodes; designers should verify bank voltage assignments early since 270 I/Os must be budgeted across supply domains deliberately.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для A3PE600-FGG484 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | A3PE600-FGG484I | A3PE600-1FGG484 | A3PE600-FG484 | A3PE600L-FGG484M | A3P600-FGG484 |
|---|---|---|---|---|---|---|
| Package | FBGA-484 (23 x 23 mm, 1 mm pitch) | FBGA-484 - same | FBGA-484 - same | FBGA-484 - same | FBGA-484 - same | FBGA-484 - same |
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600000 | 600000 | 600000 | 600000 | 600000 | 600000 |
| User I/O | 270 | 270 | 270 | 270 | 270 | 270 |
| CLBs / Logic Cells | 13824 | 13824 | 13824 | 13824 | 13824 | 13824 |
Ключевые отличия
- Zero-configuration flash architecture (против A3P600-FGG484 (and all SRAM FPGAs))
- Extended-temperature availability on same footprint (против A3PE600-FGG484I)
- Timing headroom within same package (против A3PE600-1FGG484)
- Lower static power option (против A3PE600L-FGG484M)
Заметки по проектированию
ProASIC3E flash FPGAs are live at power-up, so I/O behavior during rail ramp matters. Follow the Microchip ProASIC3E datasheet power-up sequencing guidance: allow the 1.5 V core rail (1.425 V to 1.575 V) to stabilize before I/O bank supplies ramp, and respect the specified rail ramp rates to avoid undefined I/O states or excess inrush. Place 10 uF bulk decoupling plus 0.1 uF ceramic capacitors at each bank supply, distributed near the FBGA-484 balls, and verify the total supply ramp sequence against your design in Libero timing/power simulation.
The 23 x 23 mm, 1 mm-pitch FBGA-484 requires disciplined escape routing. Plan at least one via-in-pad or dog-bone per inner ball on an 8-layer stackup, dedicating inner layers to a solid ground plane for return-current integrity across the 270 I/Os. Assign high-speed or wide buses to outer banks with short escape paths, and reserve board area around the device for bank supply decoupling. Reference the manufacturer package and ballout tables in the datasheet for exact ball coordinates before footprint generation.
Two recurring pitfalls with this part: (1) substituting the commercial-graded A3PE600-FGG484 into environments beyond its commercial temperature range - use the drop-in A3PE600-FGG484I instead, no redesign required; (2) under-budgeting the 110592-bit embedded RAM - deep buffering designs should shift storage to external memory or migrate up-family to the pin-compatible A3PE3000L-FGG484. Also confirm speed grade requirements early: upgrading to the -1 grade (A3PE600-1FGG484) is a drop-in, but downgrading timing-critical designs is not recoverable without redesign.
Информация о соответствии
Distributor data (FindIC/Jotrin) lists the package as GREEN, indicating RoHS-compliant lead-free, halogen-free construction. Formal material declarations should be requested from Microchip.
