EPM7128AETI100-7N - MAX 7000A CPLD 128 Macro 84 I/O | Intel/Altera
Артикул: EPM7128AETI100-7N ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $43.77 | $43,77 |
| 10 | $40.2 | $402,00 |
| 100 | $36.5 | $3.650,00 |
| 500 | $32 | $16.000,00 |
| 1.000 | $28.5 | $28.500,00 |
EPM7128AETI100-7N Обзор
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device consisting of multiple PAL-like macrocell arrays interconnected by a programmable switch matrix. CPLDs sit in the programmable logic hierarchy below FPGAs and above discrete glue logic, providing deterministic timing, instant-on behavior, and high-drive I/O for bus interface, address decoding, and state-machine tasks. The MAX 7000A family specifically targets 3.3 V systems with pin-compatible 5.0 V migration paths from the legacy MAX 7000S line.
Key features include 128 macrocells, 84 user I/Os, 7 ns maximum propagation delay (tPD), 129.9 MHz maximum operating frequency (fCNT), and JTAG-compliant IEEE Std 1149.1 in-system programmability. The device supports multi-volt I/O for interfacing to 5.0 V, 3.3 V, and 2.5 V logic, and operates across an industrial temperature range of -40C to +85C. The 100-pin TQFP (14x14 mm) footprint is industry standard for this density tier.
Architecturally, the MAX 7000A CPLD uses Logic Array Blocks (LABs) of 16 macrocells each, an interconnect matrix with both row and column global signals, and per-pin output enable control. Each macrocell contains a programmable AND/OR array feeding a programmable register with configurable clear, preset, and clock modes. The result is deterministic, glitch-free I/O with predictable timing independent of logic utilization - a hallmark distinction from SRAM-based FPGAs.
Typical applications include bus-interface glue logic (PCI/ISA bridging), address decoding for embedded microprocessors, state-machine controllers in industrial automation, I/O expansion and level translation in telecom infrastructure, and pin-compatible legacy upgrade paths from MAX 7000S designs. The industrial temperature grade suits factory-floor and outdoor telecom environments.
Designers should leverage the JTAG (IEEE 1149.1) interface for in-system programming and boundary-scan test, while paying attention to the multi-volt I/O bank's VCCIO pin assignment when mixing 3.3 V and 5.0 V signals on the same device.
This page synthesizes distributor availability, parametric cross-references, and design guidance not found in the manufacturer datasheet alone - giving engineers a single reference for sourcing, substitution, and application planning.
Аналоги без доработки для EPM7128AETI100-7N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EPM7128AETI100-7N (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Family, Usable Gates, Logic Array Blocks (LABs).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EPM7128AETI100-7
✅ Прямая замена✓ В наличии
$30.1 / шт.
Открыть даташит →EPM7128AETC100-7N
✅ Прямая замена✓ В наличии
$31.8 / шт.
Открыть даташит →EPM7128AETC100-7N
✅ Прямая замена✓ В наличии
$31.8 / шт.
Открыть даташит →EPM7128AETC100-10N
✅ Прямая замена✓ В наличии
$9.95 / шт.
Открыть даташит →EPM7128AETC100-10
✅ Прямая замена✓ В наличии
$13.85 / шт.
Открыть даташит →EPM7128AETI100-7N-Q
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
EPM7128AETI100-7N Максимальные параметры и электрические характеристики
| Series | MAX 7000A |
| Family | MAX 7000A CPLD |
| Macro Cells | 128 |
| Number of Usable Gates | 2,500 |
| Number of I/O | 84 |
| Number of Logic Array Blocks (LABs) | 8 |
| Propagation Delay (tPD max) | 7 ns |
| Maximum Operating Frequency (fCNT) | 129.9 MHz |
| Supply Voltage (VCCINT) | 3.0 V to 3.6 V |
| I/O Bank Voltage (VCCIO) | 2.5 V / 3.3 V / 5.0 V (multi-volt I/O) |
| Process Technology | CMOS EEPROM |
| Корпус | 100-pin TQFP (14x14 mm) |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +85C (Industrial) |
| In-System Programmability | Yes (JTAG IEEE 1149.1) |
| Статус RoHS | Compliant |
Конфигурация выводов EPM7128AETI100-7N
| Контакт 1 | I/O — User I/O (Bank 1) |
| Контакт 2 | I/O — User I/O (Bank 1) |
| Контакт 3 | I/O — User I/O (Bank 1) |
| Контакт 4 | I/O — User I/O (Bank 1) |
| Контакт 5 | I/O — User I/O (Bank 1) |
| Контакт 6 | I/O — User I/O (Bank 1) |
| Контакт 7 | I/O — User I/O (Bank 1) |
| Контакт 8 | I/O — User I/O (Bank 1) |
| Контакт 9 | I/O — User I/O (Bank 1) |
| Контакт 10 | I/O — User I/O (Bank 1) |
| Контакт 11 | GND — Ground |
| Контакт 12 | I/O — User I/O (Bank 1) |
| Контакт 13 | I/O — User I/O (Bank 1) |
| Контакт 14 | I/O — User I/O (Bank 1) |
| Контакт 15 | I/O — User I/O (Bank 1) |
| Контакт 16 | I/O — User I/O (Bank 1) |
| Контакт 17 | I/O — User I/O (Bank 1) |
| Контакт 18 | I/O — User I/O (Bank 1) |
| Контакт 19 | I/O — User I/O (Bank 1) |
| Контакт 20 | I/O — User I/O (Bank 1) |
| Контакт 21 | GND — Ground |
| Контакт 22 | I/O — User I/O (Bank 2) |
| Контакт 23 | I/O — User I/O (Bank 2) |
| Контакт 24 | I/O — User I/O (Bank 2) |
| Контакт 25 | I/O — User I/O (Bank 2) |
| Контакт 26 | I/O — User I/O (Bank 2) |
| Контакт 27 | I/O — User I/O (Bank 2) |
| Контакт 28 | I/O — User I/O (Bank 2) |
| Контакт 29 | I/O — User I/O (Bank 2) |
| Контакт 30 | I/O — User I/O (Bank 2) |
| Контакт 31 | VCCIO1 — I/O Bank 1 supply voltage |
| Контакт 32 | I/O — User I/O (Bank 2) |
| Контакт 33 | I/O — User I/O (Bank 2) |
| Контакт 34 | I/O — User I/O (Bank 2) |
| Контакт 35 | I/O — User I/O (Bank 2) |
| Контакт 36 | I/O — User I/O (Bank 2) |
| Контакт 37 | I/O — User I/O (Bank 2) |
| Контакт 38 | I/O — User I/O (Bank 2) |
| Контакт 39 | I/O — User I/O (Bank 2) |
| Контакт 40 | I/O — User I/O (Bank 2) |
| Контакт 41 | GND — Ground |
| Контакт 42 | I/O — User I/O (Bank 2) |
| Контакт 43 | I/O — User I/O (Bank 2) |
| Контакт 44 | I/O — User I/O (Bank 2) |
| Контакт 45 | I/O — User I/O (Bank 2) |
| Контакт 46 | I/O — User I/O (Bank 2) |
| Контакт 47 | I/O — User I/O (Bank 2) |
| Контакт 48 | I/O — User I/O (Bank 2) |
| Контакт 49 | I/O — User I/O (Bank 2) |
| Контакт 50 | I/O — User I/O (Bank 2) |
| Контакт 51 | GND — Ground |
| Контакт 52 | I/O — User I/O (Bank 3) |
| Контакт 53 | I/O — User I/O (Bank 3) |
| Контакт 54 | I/O — User I/O (Bank 3) |
| Контакт 55 | I/O — User I/O (Bank 3) |
| Контакт 56 | I/O — User I/O (Bank 3) |
| Контакт 57 | I/O — User I/O (Bank 3) |
| Контакт 58 | I/O — User I/O (Bank 3) |
| Контакт 59 | I/O — User I/O (Bank 3) |
| Контакт 60 | I/O — User I/O (Bank 3) |
| Контакт 61 | I/O — User I/O (Bank 3) |
| Контакт 62 | VCCIO2 — I/O Bank 2 supply voltage |
| Контакт 63 | I/O — User I/O (Bank 3) |
| Контакт 64 | I/O — User I/O (Bank 3) |
| Контакт 65 | I/O — User I/O (Bank 3) |
| Контакт 66 | I/O — User I/O (Bank 3) |
| Контакт 67 | I/O — User I/O (Bank 3) |
| Контакт 68 | I/O — User I/O (Bank 3) |
| Контакт 69 | I/O — User I/O (Bank 3) |
| Контакт 70 | I/O — User I/O (Bank 3) |
| Контакт 71 | I/O — User I/O (Bank 3) |
| Контакт 72 | I/O — User I/O (Bank 3) |
| Контакт 73 | GND — Ground |
| Контакт 74 | I/O — User I/O (Bank 3) |
| Контакт 75 | I/O — User I/O (Bank 3) |
| Контакт 76 | I/O — User I/O (Bank 3) |
| Контакт 77 | I/O — User I/O (Bank 3) |
| Контакт 78 | I/O — User I/O (Bank 3) |
| Контакт 79 | I/O — User I/O (Bank 3) |
| Контакт 80 | I/O — User I/O (Bank 3) |
| Контакт 81 | I/O — User I/O (Bank 3) |
| Контакт 82 | I/O — User I/O (Bank 3) |
| Контакт 83 | GND — Ground |
| Контакт 84 | I/O — User I/O (Bank 4) |
| Контакт 85 | I/O — User I/O (Bank 4) |
| Контакт 86 | INPUT/GCLK — Global clock input (Bank 4) |
| Контакт 87 | INPUT/OE1 — Global output enable 1 (Bank 4) |
| Контакт 88 | INPUT/GCLRn — Global clear (Bank 4) |
| Контакт 89 | INPUT/OE2 — Global output enable 2 (Bank 4) |
| Контакт 90 | TDI — JTAG Test Data In |
| Контакт 91 | TMS — JTAG Test Mode Select |
| Контакт 92 | TCK — JTAG Test Clock |
| Контакт 93 | VCCIO3 — I/O Bank 3 supply voltage |
| Контакт 94 | VCCINT — Core supply voltage 3.3 V |
| Контакт 95 | GND — Ground |
| Контакт 96 | VCCIO4 — I/O Bank 4 supply voltage |
| Контакт 97 | TDO — JTAG Test Data Out |
| Контакт 98 | I/O — User I/O (Bank 4) |
| Контакт 99 | I/O — User I/O (Bank 4) |
| Контакт 100 | I/O — User I/O (Bank 4) |
Типичное применение
EPM7128AETI100-7N подходит для 6 применениеs: Bus Interface Glue Logic, Address Decoding for Embedded Microprocessors, Industrial Automation State-Machine Controller, Telecom I/O Expansion and Level Translation, Legacy MAX 7000S Drop-In Upgrade Path, JTAG Boundary-Scan Test Controller.
Bus Interface Glue Logic
The EPM7128AETI100-7N's 84 user I/Os and deterministic 7 ns pin-to-pin tPD make it well-suited for PCI-to-ISA bridge logic, bus address decoding, and wait-state generation in legacy embedded systems. Its 3.3 V VCCINT with multi-volt I/O (2.5 V / 3.3 V / 5.0 V) lets it interface both 5.0 V legacy microcontrollers and 3.3 V modern processors on the same board without external level shifters. Compared to discrete 74-series glue logic, a single CPLD replaces dozens of packages while the JTAG ISP allows post-assembly bug fixes. The 129.9 MHz fCNT supports high-bandwidth bus cycles including PCI 33 MHz timing.
Рекомендуется
Address Decoding for Embedded Microprocessors
With 128 macrocells the EPM7128AETI100-7N can implement complex address-decoder state machines for 32-bit embedded microprocessors (e.g., PowerPC, ARM7/9, MIPS) where multiple chip-select lines must be generated from a unified memory map. Each macrocell functions as a product-term-based decoder with built-in registers, providing glitch-free chip-select outputs that are immune to logic-utility-induced delays - a key advantage over FPGA-based decoders. The industrial -40C to +85C range suits factory and outdoor telecom embedded systems.
Рекомендуется
Industrial Automation State-Machine Controller
The EPM7128AETI100-7N's non-volatile EEPROM configuration ensures instant-on state-machine operation at power-up without external boot memory, critical for industrial PLC and motor-control systems where determinism and fast startup are required. The 84 I/Os can directly drive opto-isolated inputs and 24 V relay/solenoid outputs via external drivers. Industrial temperature grade (-40C to +85C) and multi-volt I/O tolerance allow direct interfacing to legacy 5.0 V industrial sensor busses while the 3.3 V core keeps power dissipation modest in enclosed cabinets.
Рекомендуется
Telecom I/O Expansion and Level Translation
The EPM7128AETI100-7N's multi-volt I/O bank (VCCIO selectable per bank) makes it a flexible level translator between 5.0 V TDM/PCM telecom busses and 3.3 V processor peripherals in central-office and base-station equipment. Each I/O pin can be independently configured as input, output, or bidirectional, supporting complex protocol bridging. The 100-pin TQFP footprint with 84 I/Os gives ample headroom for 16-port E1/T1 fan-out, and JTAG ISP allows remote firmware updates via boundary-scan tools.
Рекомендуется
Legacy MAX 7000S Drop-In Upgrade Path
The EPM7128AETI100-7N is pin-compatible with the legacy 5.0 V MAX 7000S family (EPM7128SQC100, EPM7128STC100), allowing direct PCB-reuse migration to a 3.3 V core while preserving the original 5.0 V I/O behavior via the multi-volt VCCIO. Engineers can redesign the power tree to 3.3 V while reusing the same PCB footprint and JTAG programming infrastructure (Quartus Prime). This makes the EPM7128AETI100-7N ideal for cost-down refreshes of legacy telecom and industrial designs.
Рекомендуется
JTAG Boundary-Scan Test Controller
The EPM7128AETI100-7N's IEEE 1149.1 JTAG interface supports both in-system programming and boundary-scan test (BST) of the surrounding PCB cluster, eliminating the need for a dedicated test access port controller. With 84 user I/Os the CPLD can serve as a cluster-test hub for boards containing multiple JTAG devices, daisy-chaining TAP signals. The non-volatile EEPROM configuration means the BST infrastructure is available immediately at power-up without FPGA-style configuration delay, simplifying production test flows.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EPM7128AETI100-7N — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EPM7128AETI100-7 | EPM7128AETC100-7N | EPM7128AETC100-10N |
|---|---|---|---|---|
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same |
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Macro Cells | 128 | 128 | 128 | 128 |
| User I/O | 84 | 84 | 84 | 84 |
| Propagation Delay (tPD) | 7 ns | 7 ns | 7 ns | 10 ns |
| Max Frequency (fCNT) | 129.9 MHz | 129.9 MHz | 129.9 MHz | 100 MHz |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
| Unit Price (qty 1, as of 2026-09-13) | ~$43.77 | ~$40.00 | ~$32.00 | ~$28.00 |
Ключевые отличия
- Industrial temperature grade with full pin compatibility (против EPM7128AETC100-7N)
- 7 ns tPD speed grade with same pinout as 10 ns variant (против EPM7128AETC100-10N)
- Multi-volt I/O for direct 5.0 V/3.3 V mixing (против EPM7128SQC100 (legacy 5.0 V MAX 7000S))
Заметки по проектированию
The EPM7128AETI100-7N requires separate VCCINT (3.0 V to 3.6 V, core) and VCCIO (2.5 V / 3.3 V / 5.0 V, I/O banks) supplies. Each VCCIO pin must be decoupled with a 0.1 uF ceramic capacitor placed within 5 mm of the package pin, plus a bulk 10 uF tantalum per bank. Per the MAX 7000A datasheet, all GND pins must be connected to a common ground plane - floating GND pins cause I/O behavior errors during ISP programming.
Route the four JTAG pins (TCK, TMS, TDI, TDO) as a matched-length chain with no stubs to avoid signal integrity issues during in-system programming. The global clock (INPUT/GCLK, pin 86) and global clear (INPUT/GCLRn, pin 88) traces should be kept short and shielded with ground pour on both sides. Per Altera application note AN-95, the TCK signal should be buffered if driving more than three devices on a JTAG chain.
Do not leave any VCCIO pin floating - unused I/O banks still require VCCIO supply connection. The multi-volt I/O feature requires that each I/O bank's VCCIO be set BEFORE any I/O pin is driven; floating VCCIO can cause latch-up. The 'N' suffix indicates lead-free / RoHS-compliant packaging - older non-N variants may contain lead solder and fail RoHS inspection. Verify JTAG chain integrity by reading the device IDCODE before programming.
Информация о соответствии
'N' suffix per Altera/Intel part-number convention indicates lead-free, RoHS-compliant terminal finish. Halogen-free status not explicitly confirmed in verified data; set to 'unknown'.