K9FGGY8J5A-CCK0 - Samsung NAND Flash Memory | SSD Storage
Артикул: K9FGGY8J5A-CCK0 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.9 | $119,00 |
| 100 | $11.2 | $1.120,00 |
| 500 | $10.6 | $5.300,00 |
| 1.000 | $9.95 | $9.950,00 |
K9FGGY8J5A-CCK0 Обзор
NAND flash is a non-volatile memory technology in which memory cells are connected in series, allowing the highest bit density per silicon area of any mainstream memory type. Within the memory hierarchy, NAND flash sits below volatile DRAM in speed but provides persistent storage at far lower cost per gigabyte, making it the foundation of SSDs, eMMC storage, USB drives, and memory cards. NAND devices are hierarchical: cells form pages, pages form blocks, and blocks form planes; data is read and programmed at page granularity and erased at block granularity.
Key characteristics of Samsung K9-family high-density NAND include multi-level or triple-level cell storage for maximum bit density, an asynchronous or_toggle-mode I/O interface for command/address/data transfer, on-die charge-pump circuitry for program and erase voltages, and array of status, ID, and feature registers accessible through standard NAND command sets. Exact density, organization, page size, block size, and interface speed parameters for this specific ordering code must be confirmed against the official Samsung datasheet before design-in.
Technically, K9-series devices use a command/address/data multiplexed 8-bit or 16-bit bus with CLE, ALE, WE, RE, CE and R/B control signals, standard Samsung-ONFI compatible command protocols, and internal ECC requirements defined by the cell technology generation. As NAND geometries shrink, host-side ECC strength requirements increase, so controller selection is coupled to the NAND generation.
Typical applications include solid-state drive media, embedded storage for industrial controllers, set-top boxes, networking equipment, and high-volume consumer electronics where raw NAND is managed by an external controller.
Design consideration: raw NAND requires a memory controller with ECC, wear-leveling, and bad-block management; verify the exact die configuration and speed grade in the Samsung datasheet and confirm controller compatibility before committing a PCB layout.
This page synthesizes distributor availability signals, same-family drop-in candidates from the K9 family ordering-code system, and practical design notes not consolidated in the manufacturer datasheet, providing engineers with a single reference point for sourcing and substitution decisions.
Аналоги без доработки для K9FGGY8J5A-CCK0 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с K9FGGY8J5A-CCK0 (тот же форм-фактор и посадочное место) — отличается по Memory Type, Product Family, Mounting Type, RoHS Status.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
K9FGGY8J5A-BCK0
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →K9EUGY8S0M-CCK0
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →K9EUGY8S0M-BCK0
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →K9DUGY8S0M-CCK0
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →K9DUGY8S0M-BCK0
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →K9CFGY8U5A-CCK0
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
K9FGGY8J5A-CCK0 Максимальные параметры и электрические характеристики
| Manufacturer | Samsung Electronics |
| Product Family | K9-series NAND Flash |
| Тип памяти | NAND Flash (non-volatile) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant (CCK0 suffix denotes lead-free packing per Samsung ordering-code system) |
Руководство по цоколевке K9FGGY8J5A-CCK0 в корпусе standard
Цоколевка для K9FGGY8J5A-CCK0 (корпус standard). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для K9FGGY8J5A-CCK0.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
K9FGGY8J5A-CCK0 подходит для 6 применениеs: Solid-State Drive Media, Industrial Embedded Storage, Networking and Telecom Equipment, Consumer Electronics and Set-Top Boxes, Automotive Infotainment Storage (Non-Safety), Test, Measurement, and Data Acquisition.
Solid-State Drive Media
The K9FGGY8J5A-CCK0 functions as the raw storage medium in solid-state drives, where an external SSD controller (such as those from Marvell, Silicon Motion, or Phison) manages page/block operations, ECC, wear-leveling, and FTL (flash translation layer) functions. Samsung K9-family NAND is a staple media choice for both consumer and industrial SSD builds because of Samsung's vertical integration and consistent die quality. In an SSD context, the NAND's page size and program/erase characteristics directly determine controller firmware tuning: program times on the order of hundreds of microseconds per page and erase times of a few milliseconds per block set the bounds of sustained write performance. Designers must match the controller's supported NAND list to this specific ordering code, and verify the CCK0 speed grade timing (tR, tPROG, tDBS) in the Samsung datasheet. Multi-channel controllers typically populate 4-8 of these devices per drive to parallelize bandwidth across channels, multiplying effective throughput well beyond a single die's I/O rate.
Рекомендуется
Industrial Embedded Storage
In industrial controllers, PLCs, gateways, and data loggers, the K9FGGY8J5A-CCK0 provides high-density non-volatile storage managed by an embedded host CPU with NAND flash control logic or a dedicated companion controller. Industrial designs favor Samsung K9-family raw NAND for its long product lifecycle, documented bad-block management schemes, and stable supply through authorized channels. The raw NAND approach lets industrial OEMs implement their own wear-leveling and power-fail protection strategies, which is critical for applications writing logs continuously in environments with unstable power. Key design parameters include the NAND's endurance rating (P/E cycles per block, to be confirmed from the datasheet for this die generation), data retention at elevated temperatures, and the ECC strength the host must implement - modern fine-pitch Samsung NAND typically demands strong BCH or LDPC correction. Because commercial-grade NAND usually covers 0C to +70C, extended-temperature designs must verify the industrial temperature variant ordering code with Samsung before qualification.
Рекомендуется
Networking and Telecom Equipment
Routers, switches, and telecom line cards use K9-family NAND flash such as the K9FGGY8J5A-CCK0 to store firmware images, configuration, and log data, typically in a NOR+NAND combination where NOR provides execute-in-place boot code and NAND provides bulk storage. Raw NAND suits these designs because the boot flow can relocate code from NAND to DRAM after the NOR boot stage, exploiting NAND's much lower cost per gigabyte for large firmware and data partitions. Samsung K9 devices expose a standard multiplexed command/address bus (CLE, ALE, WE, RE, CE, R/B) that integrates easily with SoC NAND controllers from major networking processor vendors. Designers must ensure the SoC's NAND driver supports this die generation's timing modes and ONFI/toggle parameter page, and must reserve sufficient ECC overhead in the OOB (out-of-band) area per the datasheet's ECC requirements. High write-uptime log partitions should implement static wear-leveling to avoid premature block wear on configuration storage.
Рекомендуется
Consumer Electronics and Set-Top Boxes
Set-top boxes, smart TVs, and streaming devices employ K9-family NAND flash such as the K9FGGY8J5A-CCK0 as bulk storage for the operating system, applications, and recorded content. Raw NAND managed by the main SoC is the dominant cost-optimized storage architecture in this segment, since managed-NAND (eMMC) carries a controller cost premium. The K9 family's high density per package minimizes board area, an important constraint in thin consumer form factors. Consumer designs typically configure the NAND in multi-die stacked or multi-package arrays behind the SoC's NAND controller, with the firmware's FTL providing wear-leveling and power-loss resilience. Volume consumer production benefits from Samsung's commodity NAND supply cycles, though pricing fluctuates with quarterly NAND contract markets - buyers should hedge with framework agreements. Because consumer devices see low write duty cycles, the NAND's endurance rating comfortably exceeds lifetime requirements when basic wear-leveling is implemented, and the CCK0 speed grade is generally adequate for boot-time and app-launch performance targets.
Рекомендуется
Automotive Infotainment Storage (Non-Safety)
Non-safety automotive infotainment and telematics head units can use K9-family NAND flash as media behind an automotive-qualified SSD or eMMC controller that meets the temperature and quality requirements of the vehicle environment. In such architectures the Samsung raw NAND die provides the bit cost advantage while the wrapper solution supplies the AEC-grade qualification, extended temperature support (-40C to +85C or +105C), and power-interruption robustness that raw NAND alone does not guarantee. Designers must confirm the specific ordering code's temperature grade with Samsung, as standard commercial NAND may not cover automotive ambient ranges. The NAND's page program time (typically a few hundred microseconds) and block erase time (a few milliseconds) shape map-update strategies in the FTL, and write-interrupt schemes must tolerate power loss mid-program without corrupting neighboring pages. Layered ECC (LDPC) matched to this die generation's RBER profile is mandatory for reliable 10-15 year automotive service life.
Рекомендуется
Test, Measurement, and Data Acquisition
Bench instruments, oscilloscopes, and high-speed data acquisition systems use K9-family NAND flash such as the K9FGGY8J5A-CCK0 to buffer and store captured waveforms and measurement records. Raw NAND in striping configurations can deliver the sustained write bandwidth needed to stream acquisition data continuously: populating multiple devices across independent controller channels multiplies aggregate throughput and avoids the capture-dropout caused by NAND program busy times. The deterministic behavior of Samsung K9 command sequences (page program, block erase, multi-plane operations) lets instrument firmware schedule erase operations during idle windows, keeping latency spikes out of the acquisition path. Designers should enable cache-read and multi-plane features where the die supports them, per the datasheet, to further smooth effective bandwidth. Because acquired data volumes are high, endurance budgeting against the datasheet P/E cycle rating determines calibration-data partition placement (preferably on sparingly-written blocks) versus waveform scratch areas.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для K9FGGY8J5A-CCK0 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | K9FGGY8J5A-BCK0 | K9EUGY8S0M-CCK0 | K9DUGY8S0M-CCK0 | K9CFGY8U5A-CCK0 |
|---|---|---|---|---|---|
| Brand | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics |
| Product Family | K9F/K9G NAND Flash | K9F/K9G - same die | K9E generation | K9D generation | K9C generation (32Gb x8 MLC per distributor data) |
| Packing Suffix | CCK0 (lead-free packing/speed option) | BCK0 | CCK0 | CCK0 | CCK0 |
| Drop-in Compatibility vs Target | Reference | True drop-in (same die, suffix only) | Family substitute - verify timing/footprint | Family substitute - verify timing/footprint | Family substitute - verify footprint/density |
| RoHS / Lead-Free | Compliant (CCK0 suffix) | Compliant (BCK0 suffix) | Compliant (CCK0 suffix) | Compliant (CCK0 suffix) | Compliant (CCK0 suffix) |
Ключевые отличия
- Same-die suffix variant availability (против K9FGGY8J5A-BCK0)
- Commodity Samsung NAND supply ecosystem (против K9CFGY8U5A-CCK0)
- Higher generation density per package (против K9DUGY8S0M-CCK0)
Заметки по проектированию
Never substitute Samsung K9-family ordering codes by density alone. Characters within the code (e.g., FGGY8J5A vs CFGY8U5A) encode generation, organization, and die configuration, and the CCK0/BCK0 suffix encodes packing and speed grade. A drop-in substitution requires identical footprint, organization, timing set (tR, tPROG, tBERS, tDBS), and ONFI/toggle mode support. Always cross-check the candidate's datasheet parameter page against the controller's supported NAND list before releasing a BOM change; controller firmware timing registers and ECC configuration must be updated when the die generation changes.
K9-family NAND uses a multiplexed command/address/data bus where signal integrity on RE/WE strobes directly limits maximum reliable I/O frequency. Keep trace lengths matched between strobe and data lines within the datasheet skew budget, route as controlled impedance, and place series termination near the driver if traces exceed roughly 10 cm. At high toggle-mode speeds, read-enable round-trip delay becomes the gating factor; use the controller's read-reed-reed (read-retry) compensation features. Verify VCCQ decoupling with at least 0.1 uF per data pin group plus bulk capacitance to suppress simultaneous-switching noise during dense page transfers.
NAND program and erase operations draw transient current bursts from VCC as internal charge pumps generate high voltages for cell programming. Size the VCC bulk capacitance (typically 10 uF or more per package, confirm from datasheet) so that voltage droop during multi-plane program operations stays within the specified VCC tolerance, otherwise program errors or charge-pump failures can occur. In multi-package arrays, stagger program scheduling across dies in controller firmware to reduce peak rail current, and verify the PCB power plane can deliver the worst-case aggregate program current across all populated NAND channels.
Информация о соответствии
CCK0 suffix denotes Samsung lead-free packing option per ordering-code system. Formal RoHS/REACH certificates should be requested from Samsung per production lot.
