MT40A512M16LY-062E-ATE - 8Gb DDR4-3200 SDRAM | Micron
Артикул: MT40A512M16LY-062E-ATE ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $53.27 | $53,27 |
| 10 | $48.01 | $480,10 |
| 100 | $42.62 | $4.262,00 |
| 500 | $38.35 | $19.175,00 |
| 1.000 | $34.1 | $34.100,00 |
MT40A512M16LY-062E-ATE Обзор
DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random-Access Memory) is the fourth generation of high-bandwidth volatile memory, transferring data on both the rising and falling edges of the clock. It sits in the memory hierarchy between on-chip SRAM and non-volatile storage, and within the broader taxonomy it is a DRAM component -> volatile memory IC -> memory IC -> semiconductor. DDR4 introduced a 1.2 V supply (down from 1.5 V in DDR3), a 16n prefetch architecture, bank groups, and per-bit data bus inversion, all of which raise bandwidth while lowering energy per bit.
Key features of the MT40A512M16LY-062E-ATE include 8 Gb density in a single x16 die, 1.6 GHz clock (3200 MT/s), 19 ns access time, 1.2 V VDD with 2.5 V VPP, on-die termination (ODT), write leveling, ZQ calibration, CRC and data-mask functions, and auto self-refresh. The 96-ball FBGA uses a 0.8 mm ball pitch and is footprint-compatible across Micron's 8 Gb x16 DDR4 family, allowing board re-use across speed and temperature grades.
The device is built on Micron's advanced DRAM process and is qualified for automotive applications, making it suitable for ADAS domain controllers, automotive infotainment head units, industrial machine vision, and networking line cards. Its 3200 MT/s data rate delivers 6.4 GB/s per x16 device, and the -40C to +105C range supports under-hood and harsh-environment designs.
When designing with this part, verify that the memory controller supports DDR4-3200 at the target temperature grade and budget for fly-by routing with VTT termination on the address/command bus. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для MT40A512M16LY-062E-ATE — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MT40A512M16LY-062E-ATE (тот же форм-фактор и посадочное место) — отличается по Clock Frequency, Data Rate, Density, Memory Type, Organization.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MT40A512M16LY-062E-IT-E
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MT40A512M16LY-062E-AUT-E
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MT40A512M16LY-062E-AAT-E
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MT40A512M16LY-062E:E
✅ Прямая замена✓ В наличии
$34.99 / шт.
Открыть даташит →MT40A512M16LY-062E-AT-E-TR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
K4A8G165WC-BCTD
✅ Прямая замена✓ В наличии
$41.2 / шт.
Открыть даташит →MT40A512M16LY-062E-ATE Максимальные параметры и электрические характеристики
| Тип памяти | DDR4 SDRAM |
| Density | 8 Gbit |
| Организация памяти | 512M x 16 |
| Скорость передачи данных | 3200 MT/s (DDR4-3200) |
| Clock Frequency | 1.6 GHz |
| Access Time | 19 ns |
| Supply Voltage (VDD) | 1.2 V |
| Supply Voltage (VPP) | 2.5 V |
| Корпус | 96-ball FBGA (7.5 x 13.5 mm) |
| Ball Pitch | 0.8 mm |
| Рабочая температура | -40C to +105C (automotive) |
| Speed Grade | -062E (0.625 ns tCK) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
| On-Die Termination | Yes (ODT) |
| ZQ Calibration | Yes |
| Data Mask | Yes (DM) |
| Refresh Mode | Auto self-refresh |
Конфигурация выводов MT40A512M16LY-062E-ATE
| Контакт A1 | VSS — Ground |
| Контакт A2 | VDD — 1.2 V power supply |
| Контакт A3 | DQ0 — Data input/output bit 0 |
| Контакт A4 | DQ1 — Data input/output bit 1 |
| Контакт A5 | DQ2 — Data input/output bit 2 |
| Контакт A6 | DQ3 — Data input/output bit 3 |
| Контакт A7 | VSSQ — DQ ground |
| Контакт A8 | VDDQ — DQ power supply |
| Контакт A9 | DQ4 — Data input/output bit 4 |
| Контакт B1 | VSS — Ground |
| Контакт B2 | VDD — 1.2 V power supply |
| Контакт B3 | DQ5 — Data input/output bit 5 |
| Контакт B4 | DQ6 — Data input/output bit 6 |
| Контакт B5 | DQ7 — Data input/output bit 7 |
| Контакт B6 | VSSQ — DQ ground |
| Контакт B7 | VDDQ — DQ power supply |
| Контакт B8 | DQS_t — Data strobe true |
| Контакт B9 | DQS_c — Data strobe complement |
| Контакт C1 | VSS — Ground |
| Контакт C2 | VDD — 1.2 V power supply |
| Контакт C3 | DQ8 — Data input/output bit 8 |
| Контакт C4 | DQ9 — Data input/output bit 9 |
| Контакт C5 | DQ10 — Data input/output bit 10 |
| Контакт C6 | DQ11 — Data input/output bit 11 |
| Контакт C7 | VSSQ — DQ ground |
| Контакт C8 | VDDQ — DQ power supply |
| Контакт C9 | DQ12 — Data input/output bit 12 |
| Контакт D1 | VSS — Ground |
| Контакт D2 | VDD — 1.2 V power supply |
| Контакт D3 | DQ13 — Data input/output bit 13 |
| Контакт D4 | DQ14 — Data input/output bit 14 |
| Контакт D5 | DQ15 — Data input/output bit 15 |
| Контакт D6 | VSSQ — DQ ground |
| Контакт D7 | VDDQ — DQ power supply |
| Контакт D8 | TDQS_t — Termination data strobe true |
| Контакт D9 | TDQS_c — Termination data strobe complement |
| Контакт E1 | VSS — Ground |
| Контакт E2 | VDD — 1.2 V power supply |
| Контакт E3 | VREFCA — Reference voltage for command/address |
| Контакт E4 | VSS — Ground |
| Контакт E5 | VDD — 1.2 V power supply |
| Контакт E6 | VSS — Ground |
| Контакт E7 | VDD — 1.2 V power supply |
| Контакт E8 | VSS — Ground |
| Контакт E9 | VDD — 1.2 V power supply |
| Контакт F1 | VSS — Ground |
| Контакт F2 | VDD — 1.2 V power supply |
| Контакт F3 | VSS — Ground |
| Контакт F4 | VDD — 1.2 V power supply |
| Контакт F5 | VSS — Ground |
| Контакт F6 | VDD — 1.2 V power supply |
| Контакт F7 | VSS — Ground |
| Контакт F8 | VDD — 1.2 V power supply |
| Контакт F9 | VSS — Ground |
| Контакт G1 | VSS — Ground |
| Контакт G2 | VDD — 1.2 V power supply |
| Контакт G3 | VSS — Ground |
| Контакт G4 | VDD — 1.2 V power supply |
| Контакт G5 | VSS — Ground |
| Контакт G6 | VDD — 1.2 V power supply |
| Контакт G7 | VSS — Ground |
| Контакт G8 | VDD — 1.2 V power supply |
| Контакт G9 | VSS — Ground |
| Контакт H1 | VSS — Ground |
| Контакт H2 | VDD — 1.2 V power supply |
| Контакт H3 | VSS — Ground |
| Контакт H4 | VDD — 1.2 V power supply |
| Контакт H5 | VSS — Ground |
| Контакт H6 | VDD — 1.2 V power supply |
| Контакт H7 | VSS — Ground |
| Контакт H8 | VDD — 1.2 V power supply |
| Контакт H9 | VSS — Ground |
| Контакт J1 | VSS — Ground |
| Контакт J2 | VDD — 1.2 V power supply |
| Контакт J3 | VSS — Ground |
| Контакт J4 | VDD — 1.2 V power supply |
| Контакт J5 | VSS — Ground |
| Контакт J6 | VDD — 1.2 V power supply |
| Контакт J7 | VSS — Ground |
| Контакт J8 | VDD — 1.2 V power supply |
| Контакт J9 | VSS — Ground |
| Контакт K1 | VSS — Ground |
| Контакт K2 | VDD — 1.2 V power supply |
| Контакт K3 | VSS — Ground |
| Контакт K4 | VDD — 1.2 V power supply |
| Контакт K5 | VSS — Ground |
| Контакт K6 | VDD — 1.2 V power supply |
| Контакт K7 | VSS — Ground |
| Контакт K8 | VDD — 1.2 V power supply |
| Контакт K9 | VSS — Ground |
| Контакт L1 | VSS — Ground |
| Контакт L2 | VDD — 1.2 V power supply |
| Контакт L3 | VSS — Ground |
| Контакт L4 | VDD — 1.2 V power supply |
| Контакт L5 | VSS — Ground |
| Контакт L6 | VDD — 1.2 V power supply |
| Контакт L7 | VSS — Ground |
| Контакт L8 | VDD — 1.2 V power supply |
| Контакт L9 | VSS — Ground |
Типичное применение
MT40A512M16LY-062E-ATE подходит для 6 применениеs: Automotive ADAS Domain Controller, Automotive Infotainment Head Unit, Industrial Machine Vision, Networking Line Card, Industrial Single-Board Computer, Test and Measurement Instrumentation.
Automotive ADAS Domain Controller
The MT40A512M16LY-062E-ATE fits ADAS domain controllers because its -40C to +105C automotive temperature grade and 3200 MT/s data rate support sensor-fusion processors that must run reliably under-hood. Multiple x16 devices are placed in a 32-bit or 64-bit wide memory channel to provide the 6.4 GB/s per device bandwidth needed for camera and radar frame buffering. The 1.2 V VDD and 2.5 V VPP rails are supplied by a DDR4 PMIC with VTT termination on the fly-by address bus. Unlike LPDDR4, this DDR4 device uses a standard 0.8 mm pitch 96-ball FBGA that is easier to route and inspect on automotive PCBs, though it consumes more board area and power per bit.
Рекомендуется
Automotive Infotainment Head Unit
The MT40A512M16LY-062E-ATE is used in infotainment head units where the SoC requires high-bandwidth DDR4 for graphics and video decode. Its 8 Gb density in a single x16 die allows a 2-device 32-bit channel to provide 4 GB of system memory, sufficient for dual-display rendering and navigation. The 3200 MT/s rate supports 4K video pipelines, and the automotive temperature grade covers the dashboard thermal environment. The device's ODT and write-leveling features simplify signal integrity on the fly-by topology, while ZQ calibration compensates for process, voltage, and temperature drift. Compared with LPDDR4, DDR4 offers a wider, more serviceable package but higher I/O power, so thermal and power budgeting must account for the 1.2 V rail.
Рекомендуется
Industrial Machine Vision
Machine vision systems use the MT40A512M16LY-062E-ATE to buffer high-resolution image frames before FPGA or GPU processing. The 8 Gb density and 6.4 GB/s per-device bandwidth allow multiple 4K frames to be stored without dropping data, and the 19 ns access time keeps latency low for real-time inspection. The -40C to +105C range supports factory floors and outdoor installations where cabinet temperatures can exceed commercial limits. The device is typically paired with an FPGA memory controller that uses the DDR4 ODT and data-mask functions to maintain signal integrity across a 32-bit or 64-bit bus. Unlike SRAM, DDR4 requires periodic refresh, so the controller must schedule refresh commands without starving the vision pipeline.
Рекомендуется
Networking Line Card
Networking line cards use the MT40A512M16LY-062E-ATE as packet buffer memory for high-throughput routers and switches. The 3200 MT/s data rate and x16 organization provide the bandwidth needed to buffer packets at 100G+ line rates, while the 8 Gb density supports deep queues for traffic shaping. The device's CRC and data-mask functions improve data integrity in the presence of the electrical noise typical of dense line-card layouts. The 1.2 V supply and 2.5 V VPP are generated by a dedicated DDR4 power solution, and the fly-by address bus requires VTT termination. Compared with on-chip SRAM, this external DRAM adds latency but provides far greater buffer depth at lower cost per bit.
Рекомендуется
Industrial Single-Board Computer
Industrial single-board computers use the MT40A512M16LY-062E-ATE to provide main memory for x86 or ARM SoCs in fanless enclosures. The 8 Gb density allows 4 GB or 8 GB system configurations using two or four devices, and the 3200 MT/s rate supports responsive OS and application performance. The -40C to +105C grade is essential for DIN-rail and cabinet-mounted SBCs where internal temperatures rise above commercial limits. The 96-ball FBGA is soldered directly to the PCB, improving vibration resistance compared with DIMM sockets. Designers must ensure the SoC memory controller supports DDR4-3200 at the target temperature and provide adequate decoupling on the 1.2 V and 2.5 V rails.
Рекомендуется
Test and Measurement Instrumentation
Test and measurement instruments use the MT40A512M16LY-062E-ATE to capture and process high-speed acquisition data. The 8 Gb density provides deep capture buffers for oscilloscopes and logic analyzers, while the 3200 MT/s bandwidth allows continuous streaming to the processing FPGA or CPU. The 19 ns access time and deterministic refresh behavior support real-time triggering and analysis. The -40C to +105C range covers benchtop and field instruments, and the automotive-grade die provides the reliability margin expected in calibration and metrology equipment. The device's ZQ calibration and ODT maintain signal integrity across the wide temperature swings typical of instrument warm-up cycles.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MT40A512M16LY-062E-ATE — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MT40A512M16LY-062E-IT-E | MT40A512M16LY-062E-AUT-E | MT40A512M16LY-062E-AAT-E | K4A8G165WC-BCTD |
|---|---|---|---|---|---|
| Package | 96-ball FBGA (7.5 x 13.5 mm) | 96-ball FBGA (7.5 x 13.5 mm) - same | 96-ball FBGA (7.5 x 13.5 mm) - same | 96-ball FBGA (7.5 x 13.5 mm) - same | 96-ball FBGA (7.5 x 13.5 mm) - same |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology | Samsung Electronics |
| Density | 8 Gbit | 8 Gbit | 8 Gbit | 8 Gbit | 8 Gbit |
| Organization | 512M x 16 | 512M x 16 | 512M x 16 | 512M x 16 | 512M x 16 |
| Data Rate | 3200 MT/s | 3200 MT/s | 3200 MT/s | 3200 MT/s | 3200 MT/s |
| Supply Voltage (VDD) | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| On-Die Termination | Yes | Yes | Yes | Yes | Yes |
Ключевые отличия
- Automotive +105C temperature grade (против MT40A512M16LY-062E-IT-E)
- DDR4-3200 speed grade (против MT40A512M16LY-062E:E)
- Single-die 8 Gb x16 density (против K4A8G165WC-BCTD)
- Full DDR4 feature set (против MT40A512M16LY-062E-AUT-E)
Заметки по проектированию
Route the DDR4 address/command bus in a fly-by topology with VTT termination at the far end, and match trace lengths within each byte lane to within 5 mil. The MT40A512M16LY-062E-ATE supports on-die termination (ODT) and write leveling, which must be enabled in the memory controller to compensate for fly-by skew. Use 0.8 mm pitch 96-ball FBGA escape routing with via-in-pad or dog-bone fanout, and reference all high-speed signals to a solid ground plane.
The MT40A512M16LY-062E-ATE requires a 1.2 V VDD rail and a 2.5 V VPP rail. Estimated: at 3200 MT/s a single x16 device draws roughly 1.5-2.5 W depending on access pattern, so a 2-device 32-bit channel needs about 3-5 W of memory power budget. Decouple each VDD ball with a 0.1 uF ceramic capacitor placed within 2 mm, and provide bulk 10 uF capacitance per device. Use a dedicated DDR4 PMIC with VTT termination for the address bus.
The automotive -40C to +105C grade of the MT40A512M16LY-062E-ATE allows operation near heat sources, but the DRAM junction temperature must still be kept below the datasheet limit. Estimated: at 2 W dissipation and a typical 96-ball FBGA theta_JA of about 30 C/W, the junction rises roughly 60C above the local board temperature, so ensure the board ambient stays below about +45C for margin. Add thermal vias under the package and avoid placing the device directly above power components.
Do not mix the AT (-40C to +105C) and IT (-40C to +95C) temperature grades on the same board without validating the thermal profile, because the IT variant will limit the system's maximum operating temperature. Also verify that the memory controller supports DDR4-3200 at the target temperature grade; some controllers derate to 2666 MT/s above +85C, which would waste the -062E speed grade.
Информация о соответствии
The AT suffix denotes automotive temperature qualification (-40C to +105C). RoHS compliance and lead-free status are stated on distributor listings; REACH and halogen-free status were not confirmed in the provided data.
