MPC859PVR133A - 133MHz PowerQUICC MPC8xx MPU | NXP | Networking
MPN: MPC859PVR133A ✗ Tapus ng BuhayMPC859PVR133A Ulas
Mga alternatibo na pwedeng ilagay na MPC859PVR133A — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MPC859PVR133A (parehas na form factor at footprint) — pagkakaiba sa Operating Temperature, Core Architecture, Package, Process Technology, Series.
MPC859PZP133A
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MPC859TVR133A
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MPC855TVR66D4
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MPC859PVR133A-R5
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MPC859PVR133A-T
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MPC859PVR133A Mga Pinakamataas na Rating at Electrical Characteristics
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC MPC8xx |
| Core Architecture | Power Architecture, 32-bit RISC |
| Core Count | 1 |
| Core Speed | 133 MHz |
| Volte ng Pagbibigay | 3.3 V |
| Process Technology | 0.18 µm CMOS |
| Packhaging | 357-ball PBGA (25 x 25 mm) |
| Temperature na Operasyon | 0 °C to +95 °C (Commercial) |
| Cache (I/D) | 4 Kbyte / 4 Kbyte |
| MMU | Yes (hardware memory management unit) |
| Communications Processor Module (CPM) | Integrated (4 SCC, 2 SMC, SPI, I²C) |
| Fast Ethernet Controllers | 3 |
| UTOPIA / PQM Interfaces | 2 |
| PCI Interface | Yes |
| Uri ng Pagpapasok | Surface Mount (BGA) |
Gabay sa Pin Configuration ng MPC859PVR133A 357-ball pbga (25 x 25 mm)
Pin configuration para sa MPC859PVR133A (357-ball pbga (25 x 25 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MPC859PVR133A.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MPC859PVR133A ay nararapat para sa 6 aplikasyons: WAN / LAN Edge Router, DSLAM Line Card, Industrial Serial-to-Ethernet Gateway, ISDN Router / TA, T1 / E1 Multiplexer, Multi-Service Access Platform (MSAP).
WAN / LAN Edge Router
The MPC859PVR133A's integrated Communications Processor Module (CPM) with four SCC channels makes it a fit for low-to-mid-range WAN/LAN edge routers. Its 133 MHz Power Architecture core handles routing-table maintenance while the CPM offloads PPP, HDLC, and Ethernet framing in hardware, eliminating a companion ASIC. Three on-chip Fast Ethernet controllers provide switching-fabric or LAN-side connectivity without external MACs. Designers typically pair the part with a DDR memory controller and a small PHY; the 3.3 V single supply simplifies the power tree. Trade-off: NRND status means new designs should evaluate NXP LS1021A, but the part remains in service for legacy router repairs.
Inirekomenda
DSLAM Line Card
In DSLAM line cards the MPC859PVR133A is commonly deployed as the per-port control processor: the integrated UTOPIA/PQM interface (two ports) connects directly to a multi-channel xDSL framer, while the SCC/SMC channels drive management and T1/E1 backhaul. The 32-bit PowerPC core runs the line-card OS and PPPoE/PPPoA termination, while hardware ECC-protected SDRAM interface maintains link-state data. The 357-PBGA 25×25 mm footprint allows 24+ ports on a single line card. Power dissipation at 3.3 V × 133 MHz sits around 2-3 W, manageable with a small heatsink.
Inirekomenda
Industrial Serial-to-Ethernet Gateway
The MPC859PVR133A combines Ethernet MACs with multiple SCC channels, making it well matched to industrial gateways that bridge RS-232/RS-485 to Ethernet. The CPM can be configured to run Modbus RTU on one SCC while a Fast Ethernet MAC serves 10/100 Mbps traffic; the on-chip MMU enables RTOS-based protocol stacks. The 0 °C to +95 °C commercial-temperature grade suits indoor control cabinets; outdoor deployments require the industrial 'I' suffix variant. Hardware flow control, DMA-driven SCC buffering, and hardware CRC relieve the CPU of byte-level work.
Inirekomenda
ISDN Router / TA
For ISDN terminal adapters and small-office routers, the MPC859PVR133A's hardware SCC channels implement HDLC framing for the ISDN BRI/U interface directly in silicon. The integrated PCI bus lets the designer pair it with a low-cost ISDN framer or wireless WAN modem. The 4+4 Kbyte cache and MMU accelerate encryption for VPN tunnels; the 0.18 µm CMOS process delivers low standby power suitable for always-on SOHO equipment. Replacement designs should look at integrated PowerQUICC II successors with reduced BOM.
Inirekomenda
T1 / E1 Multiplexer
T1/E1 multiplexer designs use the MPC859PVR133A as the central cross-connect: two SCC channels can run HDLC-framed T1/E1 lines simultaneously while the remaining SCC channels aggregate Ethernet or serial control traffic. The CPM's BDMA channels move payload data between TDM ports and memory without CPU intervention, sustaining full E1 (2.048 Mbps) framing on all channels concurrently. Hardware clock recovery and per-channel DMA prioritization reduce jitter. A 357-BGA multilayer board with controlled-impedance traces is required.
Inirekomenda
Multi-Service Access Platform (MSAP)
In MSAP / next-generation DLC equipment the MPC859PVR133A acts as the central element manager: it terminates Ethernet uplink traffic from multiple subtended DSL line cards over PCI, while a UTOPIA interface aggregates ATM cells from the access side. The integrated MMU and 4+4 Kbyte cache keep routing tables in fast memory; the CPM's RISC engine executes PPP and ATM AAL2 protocols in parallel to the Power Architecture core. Three Fast Ethernet MACs support redundant uplinks. Trade-off: for new MSAP builds, NXP QorIQ P1022 provides higher integration.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MPC859PVR133A — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MPC859PZP133A | MPC859TVR133A | MPC855TVR66D4 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 357-BGA (25x25 mm) | 357-BGA (25x25 mm) - same | 357-BGA (25x25 mm) - same | 357-BGA (25x25 mm) - same |
| Core Architecture | Power Architecture, 32-bit | Power Architecture, 32-bit | Power Architecture, 32-bit | Power Architecture, 32-bit |
| Core Frequency | 133 MHz | 133 MHz | 133 MHz | 66 MHz (-50%) |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Fast Ethernet Controllers | 3 | 3 | Different count - verify | 2 |
| Process Technology | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.25 µm CMOS |
| Operating Temperature | 0 °C to +95 °C | 0 °C to +95 °C | 0 °C to +95 °C | 0 °C to +95 °C |
Pangunahing mga Pagkakaiba
- Integrated 4-SCC + 2-SMC + SPI + I²C communications engine on die (kumpara saMPC855TVR66D4)
- Three on-chip Fast Ethernet MACs (kumpara saMPC855TVR66D4)
- 0.18 µm CMOS process for lower active power vs 0.25 µm predecessor (kumpara saMPC855TVR66D4)
- Integrated PCI interface (kumpara saMPC850 family without PCI)
Talaan ng Disenyo
The 357-BGA at 25 × 25 mm has a ball pitch typically under 1.0 mm; breakout routing requires a multilayer PCB (8 or more layers recommended) with microvia or laser-drilled blind-via technology. Place at least one 0.1 µF X7R decoupling capacitor within 50 mils of every supply ball pair, and a bulk 10 µF tantalum or polymer capacitor near the package's supply ring.
Estimated: at 3.3 V supply, 133 MHz core, and typical 1.5-2 W active power draw, the 357-BGA on a 4-layer board with moderate copper pour holds junction rise under 30 °C above ambient. If the design runs the CPM at full utilization with all four SCCs and three Ethernet MACs active simultaneously, power may climb to 2.5-3 W; add a copper spreader or attach a small stamped heatsink to the lid.
Do not assume the MPC859PVR133A and MPC859TVR133A (or MPC859PZP133A) are interchangeable - the part-number suffix encodes both feature-set and revision differences. The Mouser listing flags the standard PVR133A as 'NO-PB' (non-RoHS leaded finish); if your build requires RoHS, order the explicit Pb-Free suffix variant and verify against the manufacturer's material declaration.
Route the SDRAM interface (address/command in one group, data in a matched-length group) to keep skew under 50 ps. Place the 50 MHz system clock oscillator within 200 mils of the CLK pin with a continuous ground reference plane below; avoid routing the clock trace over any split-plane gaps to prevent jitter and false edges on Reset Configuration.
Impormasyon ng Pagsunod sa Kautusan
Mouser listing classifies the standard MPC859PVR133A as 'NO-PB' (non-RoHS leaded BGA finish). Order the Pb-Free suffix variant for RoHS-compliant builds. AEC-Q100 qualification not applicable for this commercial MPU.
