Intel

5CSEBA4U19A7N - Cyclone V SE SoC FPGA, 40K LE, 484-UBGA | Intel

MPN: 5CSEBA4U19A7N ✓ Aktif

1.1 V (typical) Vdss 484-UBGA (U19), 19x19 mm, 1.0 mm pitch Package 925 MHz Speed 3.4 Mbits (M9K) Memory

Teklif İsteyin

MOQ: 1 |

Veri Sayfasını Görüntüle (PDF) Alternatifleri Görüntüle

Miktar

5CSEBA4U19A7N Genel Bakış

The Intel 5CSEBA4U19A7N is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug, alongside a low-power Cyclone V FPGA fabric containing approximately 40K logic elements, in a 19x19 mm 484-ball UBGAFBGA package. The HPS runs up to 925 MHz application clock in the fastest speed grade and shares 64-bit DDR3 controller, USB 2.0, Gigabit Ethernet, and SD/MMC interfaces with the FPGA via a coherent AXI backbone.

A System-on-Chip FPGA is a heterogeneous compute device that combines a hard-application processor subsystem (HPS) with a programmable logic fabric on a single silicon die, enabling deterministic hardware acceleration alongside rich software stacks. The HPS-to-FPGA bridges (AXI-32, AXI-64, AXI-128) allow latency-critical control loops to be offloaded to custom logic while the Cortex-A9 cores run Linux or RTOS workloads, eliminating the need for a discrete host processor and reducing board area, BOM cost, and inter-chip latency.

Key features include approximately 40K logic elements, 224 18x18 multipliers, 3.4 Mbits of embedded memory, dual ARM Cortex-A9 MPCore at up to 925 MHz (speed-grade dependent), hard DDR3 controller with ECC, integrated PLL and clock tree, and a single 3.0 V core power rail. The SE variant is optimized for lowest static power while keeping transceiver logic available.

The fabric uses a TSMC 28 nm low-power process with adaptive logic modules (ALMs), 8-input fracturable look-up tables, and variable-precision DSP blocks. Embedded memory blocks (M9K) operate up to 274 MHz and can be configured as single-port, dual-port, or FIFO with byte-enable support for efficient buffer management.

Typical applications include industrial motor control, factory automation HMIs, machine vision edge nodes, automotive driver assistance, medical imaging preprocessing, and ruggedized military communications. The combination of an ARM host processor with programmable logic makes the device especially attractive for smart-camera and sensor-fusion appliances that require both deterministic hardware pipelines and a Linux software stack.

When designing with this device, follow Intel's PowerPlay early power estimation workflow before PCB layout: the FPGA and HPS each require independent decoupling schemes, and the 484-UBGA package demands 1.0 mm pitch fan-out with microvia stack-ups on at least 6 PCB layers.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on individual distributor listings, giving engineers a single decision-ready view of the 5CSEBA4U19A7N for SoC FPGA selection and second-source planning.

Drop-in alternatifler için 5CSEBA4U19A7N — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller 5CSEBA4U19A7N (aynı form faktörü ve ayağa oturma) — farklı olan Package, Logic Elements, Operating Temperature, Process Technology, DSP Blocks.

5CGTFD9A5U19A7N

Intel

Package: UFBGA-484 (19 mm)

Logic Elements: 301,000

Operating Temperature: -40C to +125C (Automotive / Industrial Tj)