BSC009NE2LS5IATMA1 - 25V 0.95mΩ 217A OptiMOS 5 N-MOSFET | Infineon
MPN: BSC009NE2LS5IATMA1 ✓ فعالBSC009NE2LS5IATMA1 جائزہ
An N-channel MOSFET is a voltage-controlled majority-carrier device in which a positive gate-source voltage inverts the surface of a P-type body region to form an N-type conduction channel between source and drain. Within the broader semiconductor taxonomy, MOSFETs belong to the discrete power-device family (alongside IGBTs and GaN HEMTs), serving as the fundamental switching element in modern switch-mode power supplies, motor drives, and battery-protection circuits. The OptiMOS™ 5 generation specifically targets sub-30V rails where it competes with integrated DrMOS and GaN FETs by offering a mature silicon process, broad second-source availability, and well-characterized gate-drive requirements.
Key electrical parameters include V_DS = 25V maximum, V_GS(th) = 1.0V to 2.0V typical (1.7V nominal), continuous I_D = 40A at T_A=25°C on a small PCB pad rising to 217A pulsed at T_C=25°C, pulsed drain current capability far exceeding continuous ratings for short switching transients. Power dissipation is rated 2.5W at T_A and 74W at T_C, giving designers ample thermal headroom when mounted on sufficient copper. Total gate charge Q_G is 23 nC typical at V_GS=0 to 4.5V, and the input capacitance C_iss is 3200 pF typical — low enough to be driven efficiently by standard gate drivers without excessive crossover loss.
Typical applications include synchronous rectification in 12V-output DC-DC converters, OR-ing FETs in redundant server PSU and telecom power architectures, hot-swap / e-fuse circuits on distributed 12V/5V backplanes, motor-drive half-bridges in battery-powered tools, and high-current load switches in USB-PD and Type-C sink applications where low R_DS(on) directly reduces conduction loss and improves system efficiency. The device's monolithic Schottky-like body diode and low reverse-recovery charge also make it suitable for high-frequency buck and forward converters where dead-time losses dominate.
When designing with this MOSFET, pay particular attention to gate-drive voltage: V_GS=10V is required to achieve the datasheet's 0.95 mΩ R_DS(on), so a bootstrap or charge-pump supply is typically required in high-side applications. Thermal management must include a sufficiently large copper pour (the PG-TDSON-8-7 has an exposed drain pad); at 217A pulsed the silicon can exceed safe junction temperature within milliseconds if the thermal path is inadequate.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes drawn from the Infineon OptiMOS™ 5 datasheet — context not typically aggregated in manufacturer documentation or distributor listings.
کے لیے ڈراپ اِن متبادل BSC009NE2LS5IATMA1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں BSC009NE2LS5IATMA1 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Technology, MSL Level, Operating Temperature Range, Drain-Source Voltage (VDS).
BSC012NE2LS5IATMA1
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
BSC006NE2LS5IATMA1
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
BSC009NE2LS5IATMA1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Manufacturer Part Number | BSC009NE2LS5IATMA1 |
| Manufacturer | Infineon Technologies |
| Technology | OptiMOS™ 5 (25V/30V family) |
| ٹرانزسٹر کی قسم | N-Channel MOSFET |
| Configuration | Single with built-in diode |
| Drain-Source Voltage (V_DS) max | 25 V |
| Gate-Source Voltage (V_GS) max | 20 V |
| Gate-Threshold Voltage V_GS(th) typ | 1.7 V (range 1.0-2.0 V) |
| R_DS(on) max @ V_GS=10V | 0.95 mΩ |
| Continuous Drain Current (I_D) @ T_A=25°C | 40 A |
| Continuous Drain Current (I_D) @ T_C=25°C | 217 A (pulsed, datasheet rating) |
| Power Dissipation (P_D) @ T_A | 2.5 W |
| Power Dissipation (P_D) @ T_C | 74 W |
| Total Gate Charge (Q_G) typ | 23 nC @ V_GS=0-4.5V |
| Input Capacitance (C_iss) typ | 3200 pF |
| آپریٹنگ درجہ حرارت رینج | -55°C to +150°C |
| پیکیج | PG-TDSON-8-7 (SuperSO8 5x6 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| MSL لیول | 1 (per JEDEC J-STD-020) |
| Terminal Finish | Matte Tin (e3 per JESD-609) |
| Number of Terminals | 8 |
| RoHS اسٹیٹس | Compliant |
BSC009NE2LS5IATMA1 pg-tdson-8-7 (superso8 5x6 mm) پن کنفیگریشن گائیڈ
BSC009NE2LS5IATMA1 (pg-tdson-8-7 (superso8 5x6 mm) پیکیج) کے لیے پن کنفیگریشن۔ یہ پاور ڈیوائس گیٹ، ڈرین اور سورس ٹرمینلز کی حامل ہے۔ غیر قطبی پیکیجز کے لیے، پن 1 کی درست سمت اور فوٹ پرنٹ کی تفصیلات کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ عام استعمالات میں پاور سپلائی ڈیزائن، موٹر ڈرائیونگ اور لوڈ سوئچنگ شامل ہیں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں BSC009NE2LS5IATMA1.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
محفوظ آپریٹنگ ایریا (DC)
عام استعمالات
BSC009NE2LS5IATMA1 کے لیے موزوں ہے 7 ایپلیکیشنs: 12V Synchronous Rectification, OR-ing FET for Redundant Power, Hot-Swap / e-Fuse Switch, Battery-Protection Load Switch, Motor-Drive Half-Bridge, USB-PD Sink Load Switch, Point-of-Load DC-DC Converter.
12V Synchronous Rectification
Used as the low-side FET in 12V-output buck converters where its 0.95 mΩ R_DS(on) and 23 nC Q_G minimize conduction and switching loss at 300-500 kHz. Per the Infineon datasheet, the device's low FOM (R_DS(on)×Q_G) outperforms prior OptiMOS generations, making it a strong fit for server and telecom point-of-load regulators seeking >97% efficiency.
تجویز کردہ
OR-ing FET for Redundant Power
Used as an OR-ing FET in N+1 redundant 12V server PSU and telecom shelf architectures. The BSC009NE2LS5IATMA1's 0.95 mΩ R_DS(on) yields only 1.7W dissipation at 43A load per rail, while the fast body diode enables hot-swap insertion without ringing. The PG-TDSON-8-7 footprint accepts a heatsink tab for additional thermal margin in dense backplane designs.
تجویز کردہ
Hot-Swap / e-Fuse Switch
Used as the main switching element in 12V hot-swap controllers on storage and networking backplanes. Per the Infineon datasheet, the device's 217A pulsed rating handles inrush transients from large bulk capacitors, while the 0.95 mΩ R_DS(on) keeps steady-state loss under 1W per FET at typical 30A loads, simplifying thermal management on FR-4 boards.
تجویز کردہ
Battery-Protection Load Switch
Employed as the main disconnect FET in 3-4S lithium battery packs and portable power tools. The BSC009NE2LS5IATMA1's 25V V_DS rating, 0.95 mΩ R_DS(on), and SuperSO8 5x6 footprint deliver low-loss load switching in a compact PCB area. The 1.7V V_GS(th) allows direct drive from a low-voltage battery-monitoring MCU without auxiliary charge-pump circuitry.
تجویز کردہ
Motor-Drive Half-Bridge
Configured as low-side switch in 12V/24V brushless DC motor half-bridges for power tools, fans, and small e-mobility drives. Per the Infineon datasheet, the device's 0.95 mΩ R_DS(on) minimizes I²R losses during high-torque PWM cycles at 20-50 kHz, and the rugged avalanche-rated body diode absorbs inductive kickback without external TVS clamps.
تجویز کردہ
USB-PD Sink Load Switch
Used as the main VBUS load switch in USB-PD sink applications delivering 5V/3A-5A to downstream devices. The BSC009NE2LS5IATMA1's 25V V_DS rating and 0.95 mΩ R_DS(on) accommodate 20V USB-PD negotiation profiles while keeping conduction loss under 250 mW at 5A, enabling efficient Type-C docking-station and hub designs without external heatsinking.
تجویز کردہ
Point-of-Load DC-DC Converter
Used as the synchronous FET in buck converters stepping 12V down to 1-3.3V core voltages for FPGAs, ASICs, and processors. Per the Infineon datasheet, the 0.95 mΩ R_DS(on) and 23 nC Q_G reduce total loss to under 2% at full load, supporting the high-current (>30A) transient demands of modern processors with sub-microsecond load-step response.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا BSC009NE2LS5IATMA1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | BSC012NE2LS5IATMA1 | BSC006NE2LS5IATMA1 | BSZ031NE2LS5ATMA1 |
|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon |
| Package | PG-TDSON-8-7 (5x6 mm) | PG-TDSON-8-7 (5x6 mm) | PG-TDSON-8-7 (5x6 mm) | PG-TSDSON-8 (3x3 mm) |
| V_DS max | 25 V | 25 V | 25 V | 25 V |
| R_DS(on) max @ V_GS=10V | 0.95 mΩ | 1.2 mΩ (+26%) | 0.6 mΩ (-37%) | 3.1 mΩ (+226%) |
| Continuous I_D @ T_C=25°C | 217 A (pulsed) | ~200 A (pulsed) | ~250 A (pulsed) | ~80 A (pulsed) |
| Total Gate Charge Q_G typ | 23 nC | 20 nC | 30 nC | 9 nC |
| Technology | OptiMOS 5 (25V) | OptiMOS 5 (25V) | OptiMOS 5 (25V) | OptiMOS 5 (25V) |
| RoHS / Lead-free | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes |
اہم امتیازی خصوصیات
- Lower R_DS(on) in same package than BSC012 variant (بمقابلہBSC012NE2LS5IATMA1)
- Higher current capability in same package than BSC006 (بمقابلہBSC006NE2LS5IATMA1)
- Larger package (5x6) than BSZ031 with better thermal performance (بمقابلہBSZ031NE2LS5ATMA1)
ڈیزائن نوٹس
Estimated: at 100A continuous conduction with V_GS=10V, power dissipation is P=I²×R = 100²×0.95mΩ ≈ 9.5W at T_J=25°C and roughly 13W at T_J=125°C (R_DS(on) rises ~40% hot). The PG-TDSON-8-7 package has θ_JC ≈ 1.5°C/W on the exposed drain pad; on a 1-square-inch 2-oz copper pour θ_JA falls to ~35°C/W. At 9.5W on a 35°C/W board, junction rise is ~330°C — clearly insufficient, so heatsinking or wider copper (≥3 sq-in 4-layer) is required for continuous 100A operation. For ≤40A typical applications, a 1 sq-in 2-oz pour is adequate.
Per the Infineon PG-TDSON-8-7 land-pattern recommendation, route the high-current drain on the top layer directly into the exposed pad — never through vias, since via resistance and inductance dominate at 100A+ peaks. Use multiple thermal vias (≥9×0.3mm) under the pad to inner copper planes. Keep the gate loop (gate-driver → gate resistor → gate pin → source pin → driver return) under 5 nH to prevent dv/dt-induced ringing that can cause MOSFET shoot-through in half-bridge configurations.
Do not assume V_GS(th)=1.7V is sufficient to fully enhance the device — at V_GS=4.5V R_DS(on) is roughly 2× the V_GS=10V figure (per Infineon datasheet characterization curves). For synchronous-rectifier bootstrap supplies, the bootstrap voltage may sag below 8V at light load, increasing conduction loss by 30-50%; use a charge pump or external 10V bias when possible. Also note that the device's avalanche rating is for unclamped inductive switching only — for H-bridge motor-drive applications, add external TVS diodes to absorb repetitive avalanche energy.
تعمیل کی معلومات
RoHS compliant and lead-free per JESD-609 e3 terminal finish (matte tin) per Infineon product page. AEC-Q100 not applicable — this is a discrete MOSFET, not qualified to automotive grade; for automotive use consider Infineon's automotive-grade OptiMOS 5 variants. Halogen-free status not explicitly stated in provided data.
