EP1K50TI144-2F - 50K-Gate ACEX-1K FPGA, 144-TQFP, Industrial | Intel
MPN: EP1K50TI144-2F ✗ اختتامِ زندگیEP1K50TI144-2F جائزہ
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that the designer can program after manufacture to implement arbitrary digital functions. FPGAs sit between fixed-function Application-Specific Integrated Circuits (ASICs) and software-driven microcontrollers, offering parallel hardware acceleration, deterministic timing, and re-programmability. The ACEX-1K family belongs to the broader hierarchy of programmable logic devices (PLDs) and uses a look-up-table (LUT)-based architecture with embedded array blocks (EABs) that can be configured as RAM, ROM, or multiplier blocks.
The EP1K50TI144-2F features 102 maximum user I/O pins, supports in-system programmability via the IEEE 1149.1 JTAG interface, and integrates dedicated clock management and routing resources. Its 2,880 logic elements deliver sufficient density for moderate-complexity glue logic, bus interfaces, state-machine control, and signal-processing pipelines, while the 40,960 bits of embedded RAM support small FIFOs, lookup tables, and data buffers without consuming general logic.
Typical applications include industrial control and factory automation, telecommunications line cards and bridging, low-volume prototyping of ASIC replacements, automotive telematics and body controllers, and embedded test and measurement equipment. The 144-pin TQFP footprint is a mature, easy-to-assemble surface-mount package that supports both hand-soldering and standard reflow processes.
When designing with this device, ensure that the Quartus II or MAX+PLUS II development toolchain is configured for the ACEX-1K family. Use the JTAG pins (TCK, TMS, TDI, TDO) exclusively for programming and boundary-scan testing, and add proper decoupling (0.1 µF per VCCINT pin, bulk 10 µF) close to the supply pins to suppress switching noise during configuration and high-utilization operation. Note that the ACEX-1K family is mature and approaching end-of-life, so plan obsolescence mitigation by evaluating current-generation Cyclone or MAX II equivalents for new designs.
This page synthesizes distributor pricing, drop-in compatible ACEX-1K variants, and practical design notes not found in the manufacturer datasheet alone.
کے لیے ڈراپ اِن متبادل EP1K50TI144-2F — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP1K50TI144-2F (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Speed Grade, Process Technology, Operating Temperature, Configuration Method.
EP1K50TI144-2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP1K50TI144-2N
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP1K50TI144-1X
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP1K30TI144-2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP1K10TI144-2
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP1K50TI144-3N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EP1K50TI144-2F زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | ACEX-1K |
| Series | FLEX 10K / ACEX 1K |
| Logic Elements / Cells | 2880 |
| Equivalent Gates | 50,000 |
| Embedded RAM Bits | 40,960 |
| Maximum User I/O | 102 |
| Number of Terminals | 144 |
| Terminal Form | GULL WING |
| Package Code | QFP (TQFP-144 / PQFP144) |
| Package Shape | SQUARE |
| JEDEC Package Code | S-PQFP-G144 |
| Process Technology | 0.22 µm CMOS |
| Supply Voltage (VCCINT) | 2.375 V to 2.625 V (2.5 V typical) |
| زیادہ سے زیادہ کلاک فریکوئنسی | 200 MHz (family datasheet) |
| Speed Grade | -2 (fast) |
| Operating Temperature Grade | Industrial |
| Programming Interface | JTAG (IEEE 1149.1) |
| ماؤنٹنگ ٹائپ | Surface Mount |
EP1K50TI144-2F s-pqfp-g144 پن کنفیگریشن گائیڈ
EP1K50TI144-2F (s-pqfp-g144 پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EP1K50TI144-2F.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
EP1K50TI144-2F کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control & Factory Automation, Telecommunications Line-Card Glue Logic, ASIC Prototyping & Logic Replacement, Embedded Test & Measurement Equipment, Automotive Telematics & Body Electronics, Legacy System Maintenance & Field Replacement.
Industrial Control & Factory Automation
The EP1K50TI144-2F's 2,880 logic elements, 40,960 bits of embedded RAM, and industrial temperature grade make it well-suited to industrial control and factory automation designs. The 50,000-gate capacity supports medium-complexity state machines for PLC-style controllers, multi-axis motor-control glue logic, and protocol bridging (RS-232/RS-485/Ethernet converters). The 102 user I/Os are sufficient to interface with multiple sensors, opto-isolated inputs, and relay-driver outputs simultaneously. Industrial-grade operation across extended temperature ranges is essential for factory-floor environments where ambient temperatures fluctuate. The 144-pin TQFP package's mature surface-mount assembly compatibility simplifies manufacturing and rework, while the JTAG-based in-system programmability enables field firmware updates without component removal.
تجویز کردہ
Telecommunications Line-Card Glue Logic
In telecommunications line cards, the EP1K50TI144-2F serves as glue logic between physical-layer transceivers, TDM framers, and backplane ASICs. The device's 200 MHz maximum clock frequency and 2.5 V core supply are well-matched to legacy telecom data-path designs that operate at rates below 155 MHz. With 50,000 equivalent gates, designers can implement custom HDLC controllers, ATM cell segmentation and reassembly logic, and T1/E1 framing functions without external glue-logic ICs. The 102 user I/Os provide ample connectivity for multi-port line cards interfacing with multiple transceiver channels. Embedded RAM (40,960 bits) supports small FIFO buffers required for rate adaptation between telecom data streams.
تجویز کردہ
ASIC Prototyping & Logic Replacement
The EP1K50TI144-2F is widely used as an ASIC prototype and low-volume replacement for glue-logic ICs, custom controllers, and proprietary interfaces. Designers targeting fixed-function ASICs can validate their designs in a reprogrammable FPGA before committing to NRE costs, with the same 144-pin TQFP package enabling drop-in replacement of ASICs in identical footprints. The 50,000-gate capacity matches medium-scale ASICs commonly used in industrial, automotive, and consumer products. The JTAG programming interface allows rapid design iteration during development. Once the design is validated, the FPGA can serve as the production solution for low-volume applications, avoiding expensive ASIC mask charges while delivering deterministic hardware performance that microcontrollers cannot match for parallel tasks.
تجویز کردہ
Embedded Test & Measurement Equipment
Test and measurement equipment benefits from the EP1K50TI144-2F's combination of moderate logic density, embedded RAM for data buffers, and deterministic timing. The device can implement custom waveform generators, protocol analyzers, signal-conditioning logic, and timing-critical trigger circuits. The 102 user I/Os enable simultaneous interface with multiple measurement channels, while the 200 MHz maximum clock frequency supports sampling-rate generation and timing synthesis. Embedded RAM (40,960 bits) provides sufficient buffer memory for short captures without external SRAM. The industrial temperature grade ensures operation in lab environments where ambient temperature is not strictly controlled. The mature TQFP-144 package allows hand-soldering for prototype builds and rapid rework during instrument development cycles.
تجویز کردہ
Automotive Telematics & Body Electronics
Although not AEC-Q100 qualified, the EP1K50TI144-2F is suitable for non-safety automotive applications such as telematics control units, infotainment peripherals, and body electronics modules. The 50,000-gate capacity supports LIN/CAN bus controllers, custom sensor interfaces, and protocol bridging between automotive networks and external connectivity modules. The 102 user I/Os accommodate multiple sensor inputs, actuator driver interfaces, and diagnostic ports. Embedded RAM provides small FIFO buffers for message queuing on automotive buses. The industrial temperature grade covers under-dash and cabin-mounted electronics that operate in milder thermal environments compared to under-hood applications. Designers targeting AEC-Q100 compliance should evaluate current-generation Cyclone IV automotive variants instead.
تجویز کردہ
Legacy System Maintenance & Field Replacement
The EP1K50TI144-2F remains critical for maintaining and repairing legacy equipment where the original Altera ACEX-1K FPGAs are still in service. Industrial machines, telecommunications infrastructure, test equipment, and military systems deployed in the late 1990s and early 2000s often use ACEX-1K devices that require form-fit-function replacements as original parts age out. The 144-pin TQFP package allows board-level replacement without PCB rework. Drop-in compatible variants like EP1K50TI144-2N, EP1K50TI144-2, and EP1K30TI144-2 provide sourcing flexibility when the original -2F part is unavailable. The JTAG interface permits direct bitstream programming from original ACEX-1K programming files (.pof or .sof), minimizing firmware re-validation effort.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EP1K50TI144-2F — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EP1K50TI144-2 | EP1K50TI144-2N | EP1K50TI144-1X | EP1K30TI144-2 | EP1K10TI144-2 |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) |
| Package | TQFP-144 (S-PQFP-G144) | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same |
| Logic Elements | 2,880 | 2,880 | 2,880 | 2,880 | 1,728 | 576 |
| Equivalent Gates | 50,000 | 50,000 | 50,000 | 50,000 | 30,000 | 10,000 |
| Embedded RAM Bits | 40,960 | 40,960 | 40,960 | 40,960 | 24,576 | 12,288 |
| Maximum User I/O | 102 | 102 | 102 | 102 | 102 | 92 |
| Speed Grade | -2 | -2 | -2 | -1 (slower) | -2 | -2 |
| Supply Voltage | 2.5 V (2.375-2.625 V) | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
اہم امتیازی خصوصیات
- Industrial temperature grade without lead-free finish (بمقابلہEP1K50TI144-2N)
- Highest density in the 144-pin TQFP ACEX-1K family (بمقابلہEP1K30TI144-2)
- Faster speed grade than -1 variants (بمقابلہEP1K50TI144-1X)
- Mature industrial-grade FPGA with proven long-term reliability (بمقابلہATF1504AS (CPLD))
ڈیزائن نوٹس
Estimated: At 100% logic utilization with 200 MHz internal clock, the EP1K50TI144-2F core current draw can reach approximately 200-300 mA from VCCINT (2.5 V). Provide at least one bulk 10 µF tantalum capacitor and one 0.1 µF ceramic decoupling capacitor per VCCINT pin, placed within 5 mm of each supply pin. Multiple VCCIO banks should each have their own 0.1 µF decoupling to suppress simultaneous-switching-output (SSO) noise. Add a ferrite bead between the 2.5 V regulator and the FPGA's VCCINT pins to filter switching noise from the regulator.
The 144-pin TQFP package has a 0.5 mm lead pitch requiring careful PCB layout. Use a 4-layer PCB with continuous power and ground planes for signal integrity. Maintain 50 Ω controlled impedance on high-speed traces (e.g., clock nets above 100 MHz). Keep JTAG trace lengths under 150 mm and series-terminate at the driver for TCK. Provide a 1 kΩ pull-up resistor on nCONFIG and CONF_DONE per the ACEX-1K configuration guide. Use thermal relief spokes on TQFP pads to balance solderability and thermal dissipation during reflow.
Do not confuse the -2F suffix with the -2N suffix - the -F indicates industrial temperature grade with non-lead-free finish, while -N indicates lead-free (Pb-free) finish. Both share the same 144-pin TQFP package and -2 speed grade, so the PCB footprint is identical, but lead-free reflow profiles must be applied to -N variants. Also note that the EP1K50TI144-2F belongs to the NRND ACEX-1K family; new designs should consider Intel Cyclone IV/MAX II equivalents unless obsolescence is acceptable.
The TQFP-144 exposed die pad on the package bottom improves thermal performance but is not electrically connected in the ACEX-1K family. The pad may be soldered to a PCB thermal land for improved heat dissipation or left unconnected. When implementing multi-FPGA designs, route configuration daisy-chains carefully to avoid signal-integrity issues during configuration - each EP1K50TI144-2F's CONF_DONE pin should have its own 1 kΩ pull-up to VCCIO, not shared with neighboring devices.
تعمیل کی معلومات
RoHS and REACH status not specified in verified data - the -F suffix typically indicates non-lead-free terminal finish (SnPb); verify with distributor documentation for production compliance. Not AEC-Q100 qualified - automotive safety applications require different parts.
